|
楼主 |
发表于 2004-7-4 23:37:44
|
显示全部楼层
回复: Nvidia(6106) Installer HOWTO for SuSE Linux9.1 users
最初由 锋锋 发表
1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source' package with YaST2. Update it - if not
already done - via YaST2 Online Update (YOU) and configure it then
with the following commands:
#cd /usr/src/linux
#make cloneconfig
#make prepare-all (only for kernel-source >= 2.6.5-7.75)
2) Use the nvidia installer for 1.0-6106.
a) kernel-source < 2.6.5-7.75
#sh NVIDIA-Linux-x86-1.0-6106-pkg1.run
b)kernel-source >= 2.6.5-7.75
#sh NVIDIA-Linux-x86-1.0-6106-pkg1.run --kernel-source-path=/usr/src/linux
3) Configure XFree86 with
# sax2 -m 0=nvidia (0 is a digit, not a letter!)
NOTE: There is no need to try to enable 3D support.It's already enabled , when the nvidia driver is running
Good Luck !
十分感谢,!!!:thank |
|