MDK10.0网络连接问题

孙光旭

我的MDK10.0网络连接一直断开，用# /ect/rc.d/init.d/network start后显示已连接，再到控制中心看还是断开。命令行模式# /sbin/ifconfig结果如下
eth0  Link encap:Ethernet HWaddr 00:E0:4C:8C:SD0
      inet addr:10.1.1.165  Bcast:10.1.1.191 Mask:255.255.255.192
      inet6 addr:fe80::ze0:4cff:fe8c:5dd0/64 Scopeink
      UPBROADCAST RUNNING MUTECAST MTU:1500 Metric;1
      RX pachets:112404 errors:0 dropped:0 overruns:0 frame:0
      TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:8051027 (7.6MB) TX bytes:3900 (308kb)
      Interrupt:21 Base address:0*8000

孙光旭

LO  Link encapocal Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    iuetb addr: ::1/128 Scop:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:142 errors:0 dropped:0 overruns:0 frame:0
    TX packets:142 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes;9366 (901kb) TX bytes:9366 (9.1kb)

孙光旭

eth0  Link encap:Ethernet HWaddr 00:E0:4C:8C:SD0
      inet addr:10.1.1.165 Bcast:10.1.1.191 Mask:255.255.255.192
      inet6 addr:fe80::ze0:4cff:fe8c:5dd0/64 Scopeink
      UPBROADCAST RUNNING MUTECAST MTU:1500 Metric;1
      RX pachets:112404 errors:0 dropped:0 overruns:0 frame:0
      TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:8051027 (7.6MB) TX bytes:3900 (308kb)
      Interrupt:21 Base address:0*8000

第一贴勘误

孙光旭

字符勘误

jhuangjiahua

大侠来看看啊


这种问题我从来没遇到过 :help