我的freebsd4.11不能上网，帮帮忙。

datou1301

PPP.conf:
内容

#################################################################
# PPP  Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp
#
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180                        # 3 minute idle timer (the default)
enable dns                                # request DNS info (for resolv.conf)
adsl:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
set phone 电话号码
set authname 用户名
set authkey 密码
set timeout 300
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR                        # Add a (sticky) default route

ppp.linkup:
内容

adsl:
delete ALL
add 0 0 HISADDR
!bg sendmail -bd -q30m

拨号情况
# ppp
  Working in interactive mode
  Using interface: tun0
ppp ON localhost> dial adsl
ppp ON localhost> Warning: Chat script failed
ppp ON localhost>

# ifconfig
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        ether 00:e0:4c:eb:5e:4d
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lp0: flags=8810<OINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<OINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<OINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
tun0: flags=8010<OINTOPOINT,MULTICAST> mtu 1500
#


是那里出错了，讲详细点，好吗？

syyuning

http://journal.cnfug.org/issue16/000091.html

datou1301

我看过那篇文章，也用了哪配置文件。我的网卡是主板集成RTL8139应该是r10吧，也没成功。
系统的/dev目录下也有tun0 ...tun4四个文件，我上面的配置错在那里？真的没有解决的方法了吗？

datou1301

把RL0写成R10，一字之差啊。
本来很简单的事情搞了好几天。