|
这是readme.txt
8169.c -- RTL8169 Linux driver version 0.0.6
1. This driver supports Realtek RTL8169 Gigabit Ethernet Adapter in linux kernel 2.4.x.
2. Installation steps:
(1)The object code can be obtained by compiling 8169.c using the associated 'Makefile'.
(2)Move the object code 8169.o to the directory /lib/modules/2.4.2/kernel/drivers/net.
(3)Type command "insmod 8169"
(4)Type command "dmesg", then some information about the driver will be printed.
3. The media can be forced to one of the 5 modes as follows.
Cmd: "insmod 8169 media = SET_MEDIA"
Ex: "insmod 8169 media = 0x04" will force PHY to operate in 100Mpbs Half-duplex.
SET_MEDIA can be:
_10_Half = 0x01
_10_Full = 0x02
_100_Half = 0x04
_100_Full = 0x08
_1000_Full = 0x10
4. Support TBI mode without any modification.
这怎么安装呀。。。请高手指点。。。 |
|