安装SUSE pro 9.2 格式化硬盘时 安装停止

michealylj

我下载了一个Suse pro 9.2 DVD版，在安装的过程中做完硬盘分区后， 格式化硬盘时，安装停止了，硬盘灯亮，进度条显示１００％，但是就是不往下继续！！！请那位ＤＸ指点一下！！！
多谢多谢！！！

michealylj

我的安装环境如下：

硬件：英特尔P4处理器516，  2.93Ghz, 64位， 533Mhz 前端系统总线、LGA775封装； 1G DDR内存； 80G 7200转硬盘；
软件： SUSE pro 9.2 64bit version......

ptr

SATA?
估计是SCSI的模块和ACPI之间有冲突。
EM64T的板子，你可以试试在安装时加上acpi=off noapic。

michealylj

不是SATA, 就是IDE;
我也尝试用disbale APCI模式安装，情况一样！！

ptr

acpi drives the softboot nuts during the installation. you can choose the safe install option to make sure that you dont have acpi & apm both enabled.
something else is that, acpi may cause the controllers not geting the right interrupts.
At lease try to use the option "acpi=off", it won't hurt you

ptr

这是我的EM64T的presccot，X86_64 P4 3.2G，no HT, no acpi, no apic。I'm running the 32bit SLES9. I hope this info will help you.
#AEEM6:~#lspci
0000:00:00.0 Host bridge: Intel Corp. Workstation Memory Controller Hub (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. Workstation Memory Controller Hub PCI Express Port (rev 04)
0000:00:1b.0 Class 0403: Intel Corp. I/O Controller Hub Audio (rev 03)
0000:00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 1 (rev 03)
0000:00:1c.2 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 2 (rev 03)
0000:00:1c.3 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 3 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. I/O Controller Hub SATA cc=raid (rev 03)
0000:00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00fc (rev a2)
0000:06:04.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61)
0000:06:08.0 Ethernet controller: Intel Corp.: Unknown device 1066 (rev 01)
AEEM6:~ # cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 3
model name      : Genuine Intel(R) CPU 3.20GHz
stepping        : 4
cpu MHz         : 3195.051
cache size      : 1024 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts ac
pi mmx fxsr sse sse2 ss ht tm pbe lm pni monitor ds_cpl cid
bogomips        : 6307.84

AEEM6:~ # cat /proc/cmdline
root=/dev/sda6 vga=0x31a selinux=0 acpi=off noapic resume=/dev/sda3 elevator=cfq splash=verbose