adsl 拨号连接不上

melon

我装了电信ADSL, 可以通过设置MODEM上网,但是电信的人说那样容易使MODEM坏掉,所以要装一个拨号软件来上网, 我就用RH9 自带的pppoe来拨号,但是总也连不上去. 下面是运行ifup ppp0 后/var/log/message里的信息. 请问问题出在哪里呢?

Aug 31 13:04:09 peterxu pppd[5569]: pppd 2.4.1 started by root, uid 0
Aug 31 13:04:09 peterxu pppd[5569]: Using interface ppp0
Aug 31 13:04:09 peterxu pppd[5569]: Connect: ppp0 <--> /dev/pts/1
Aug 31 13:04:09 peterxu /etc/hotplug/net.agent: assuming ppp0 is already up
Aug 31 13:04:40 peterxu pppd[5569]: LCP: timeout sending Config-Requests
Aug 31 13:04:40 peterxu pppd[5569]: Connection terminated.
Aug 31 13:04:40 peterxu /etc/hotplug/net.agent: NET unregister event not supported
Aug 31 13:04:44 peterxu pppoe[5570]: Timeout waiting for PADO packets
Aug 31 13:04:44 peterxu pppd[5569]: Exit.
Aug 31 13:04:44 peterxu adsl-connect: ADSL connection lost; attempting re-connection.
Aug 31 13:04:49 peterxu pppd[5642]: pppd 2.4.1 started by root, uid 0
Aug 31 13:04:49 peterxu /etc/hotplug/net.agent: assuming ppp0 is already up
Aug 31 13:04:49 peterxu pppd[5642]: Using interface ppp0
Aug 31 13:04:49 peterxu pppd[5642]: Connect: ppp0 <--> /dev/pts/1
Aug 31 13:05:20 peterxu pppd[5642]: LCP: timeout sending Config-Requests
Aug 31 13:05:20 peterxu pppd[5642]: Connection terminated.
Aug 31 13:05:20 peterxu /etc/hotplug/net.agent: NET unregister event not supported
Aug 31 13:05:24 peterxu pppoe[5643]: Timeout waiting for PADO packets
Aug 31 13:05:24 peterxu pppd[5642]: Exit.

squallabc

adsl-status
看看什么状态

melon

显示如下.
[root@peterxu peter]# /sbin/adsl-connect
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
LCP: timeout sending Config-Requests
Connection terminated.
pppoe: Timeout waiting for PADO packets
LCP: timeout sending Config-Requests
Connection terminated.
pppoe: Timeout waiting for PADO packets

[root@peterxu peter]# /sbin/adsl-status
Note: You have enabled demand-connection; adsl-status may be inaccurate.
adsl-status: Link is down -- could not find interface corresponding to
pppd pid 2984


如果执行adsl-connect 后马上执行 adsl-status就会显示如下.
[root@peterxu peter]# /sbin/adsl-connect
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
[root@peterxu peter]# /sbin/adsl-status
Note: You have enabled demand-connection; adsl-status may be inaccurate.
adsl-status: Link is attached to ppp0, but ppp0 is down
[root@peterxu peter]#

squallabc

你能进图形界面吗?
能的话
系统工具->互联网配置向导->xDSL->把你的adsl帐号密码输入->完成
系统设置->网络->选择你刚才的那个设置->激活
看看能上望了吗?


我如果用你的方法的话,他说失败,但是居然能上网,我也高不清楚

txkss

兄弟看看置顶贴子
这是一个老话题了

先说说你用的LINUX发行版本

一般我都是把系统自带的rp-pppoe删除掉
下载一个源代码的安装上

之后在安装目录执行adsl-start就可以了
跟着进行设置

非常方便的啊

在DNS服务器处写server  表示自动获取就可以了

melon

先谢谢热心帮忙.

还是不行啊,我用的是RH9.0, 把原来的rp-pppoe删除了,重新下载了一个rp-pppoe 3.6的, 然后安装, 配置这么简单,不会有问题的, 但是结果仍旧不行.

没删除前能进图形界面的,配置好点激活,过会它就跳出来说不能激活..

Chowroc

我记得好像是不能使用adsl-connect命令而必须使用adsl-start的。

txkss

进入图形做什么啊
就在shell下做就可以了

苦涩之恋

请问要删除自带的ppp怎么做啊，请指教
我用的是linux enterporise AS4啊

melon

不会要重新编译内核吧?