装了xorg7后display不能运行，gnome没图标!!

sssslang · 发表于 2006-3-10 03:04:51

:help

$display
display: unable to load font `(null)'.

gnome中打不开任何图像，gthumb也不行。但用gqview就可以。奇怪了。

sssslang · 发表于 2006-3-10 09:34:18

今天莫名其妙gnome就可以显示图标了。
可display还不能用，而且mplayer也不能用，说是没有xv，谁来帮帮我！

$xvinfo
X-Video Extension version 2.2
screen #0
no adaptors present

mplayer abc.wmv
MPlayer 1.0pre7try2-4.0.3 (C) 2000-2005 MPlayer Team
CPU: Intel  (Family: 6, Stepping: 6)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.

Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Playing abc.wmv.
ASF file format detected.
VIDEO:  [WMV3]  384x288  24bpp  1000.000 fps 0.0 kbps ( 0.0 kbyte/s)
Clip info:
name: 6\
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, s16le, 44.0 kbit/3.12% (ratio: 5504->176400)
Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (FFmpeg))
==========================================================================
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support and read DOCS/HTML/en/video.html#xv!
See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
Error opening/initializing the selected video_out (-vo) device.

800 · 发表于 2006-3-10 18:09:19

http://wiki.archlinux.org/index. ... nt_.27.28null.29.27

sssslang · 发表于 2006-3-10 20:04:09

谢谢800

800 · 发表于 2006-3-10 23:29:33

嘿，我正在看，只是顺手，你这么客气，我倒不好意思了。
xv的问题，看你用什么驱动。要是fglrx之类，Option "VideoOverlay" "on"。

sssslang · 发表于 2006-3-11 02:01:07

我是radeon 7000的显卡，好象fglrx不支持，就用xorg自带的radeon驱动。
刚才重新编译mplayer，加--enable-gui，提示没有x11,这个x11是什么？我有libx11这个包。只好把gui disable掉了，编译完后，只能用sdl的vo了。
用-vo help看到xv和x11都没有了。这该怎么办？
还有，这些输出差别大吗？一般用哪个？

800 · 发表于 2006-3-15 02:38:53

http://www.mplayerhq.hu/DOCS/HTML/zh/video.html#xv

sssslang · 发表于 2006-3-15 19:56:09

看了那个了，这个是我编译的log，我在源里没有找到libx11-dev这个包啊。
============ Checking for X11 headers presence ============
Result is: not found (check if the dev(el) packages are installed)

		自动登录	找回密码
密码			注册