谁邦我看一下我的inittab文件

abcdefgl123

做了一个小系统uclib+BusyBox+iptables)
    进不去.我改了N次inittab文件,还是进不去.
主要有俩个提示: 1). mount:cannot read /porc/mounts: No such file or directory

                2).getty:/dev/tty1:No such file or directory
以下是小系统的/dev文件内容:
[root@localhost /]# chroot /mnt/lfs/ /bin/sh
BusyBox v1.2.0-pre0 (2006.06.29-09:35+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
/ # cd dev
/dev # ls
console    hda5       hdb5       mtd3       ptyp5      tty1       ttyp0
fb0        hda6       hdb6       mtdblock0  ptyp6      tty2       ttyp1
fb1        hda7       hdb7       mtdblock1  ptyp7      tty3       ttyp2
fb2        hda8       hdb8       mtdblock2  ptyp8      tty4       ttyp3
fb3        hda9       hdb9       mtdblock3  ptyp9      tty5       ttyp4
hda        hdb        initctl    net        ram        tty6       ttyp5
hda1       hdb1       input      null       ram0       tty7       ttyp6
hda10      hdb10      kmem       psaux      ram1       ttyP0      ttyp7
hda11      hdb11      log        ptmx       ram2       ttyP1      ttyp8
hda12      hdb12      loop0      pts        ram3       ttyP2      ttyp9
hda13      hdb13      loop1      ptyp0      random     ttyP3      urandom
hda14      hdb14      mem        ptyp1      rtc        ttyS0      zero
hda2       hdb2       mtd0       ptyp2      shm        ttyS1
hda3       hdb3       mtd1       ptyp3      tty        ttyS2
hda4       hdb4       mtd2       ptyp4      tty0       ttyS3

以下是小系统的/etc/inittab文件内容:
# Begin /etc/inittab
id:3:initdefault:
si::sysinit:/etc/init.d/rcS
# <id>:<runlevels>:<action>:<process>
root::sysinit:/bin/mount -o remount,rw /
proc::sysinit:/bin/mount -t proc /dev/proc /proc
moun::sysinit:/bin/mount -a
host::sysinit:/bin/hostname -F /etc/hostname
ifc::sysinit:/sbin/ifconfig lo 127.0.0.1 up
rout::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
var::sysinit:/bin/touch /var/log/messages
#tty1::respawn:/sbin/getty tty1 9600
#tty2::respawn:/sbin/getty tty1 9600
1:2345:respawn:/sbin/getty tty1 9600
2:2345:respawn:/sbin/getty tty2 9600
sysl::respawn:/sbin/syslogd -n -m 0
klog::respawn:/sbin/klogd -n
tail::respawn:/usr/bin/tail -f /var/log/messages
ca::ctrlaltdel:/sbin/reboot
klo2::shutdown:/usr/bin/killall klogd
sys2::shutdown:/usr/bin/killall syslogd
umou::shutdown:/bin/umount -a -r
swap::shutdown:/sbin/swapoff -a
su:nce:/sbin/sulogin

请各位邦我看一下.谢谢.

abcdefgl123

问题一:
启动
.................
mounting unchecked running e2fsck is recommended
freeing unused kernel memory: 236k freed

不动了.        (重编内核后解决.)

-----------------------------------------------------------------
问题二:
启动
..................
ibm-acpi: ec object not found
isapnp: Sanning for PnP cards
isapnp: No Plug & Play device found

不动了.        (重编内核后解决.) (内核精简到最小,不相关的设备都不编入内核,不用模块.)
问题三:
启动
..................
INIT:/etc/inittab[18]:duplicate ID field "null"
INIT:/etc/inittab[19]:duplicate ID field "null"
INIT:/etc/inittab[20]:duplicate ID field "null"
INIT:/etc/inittab[21]:duplicate ID field "null"
INIT:/etc/inittab[22]:duplicate ID field "null"
INIT:/etc/inittab[24]:missing id field
INIT:/etc/inittab[34]:duplicate ID field "null"
INIT:/etc/inittab[35]:duplicate ID field "null"
INIT:/etc/inittab[36]:duplicate ID field "null"
INIT:/etc/inittab[40]:missing id field
INIT:/etc/inittab[43]:shutdown:unknown action field
INIT:/etc/inittab[44]:shutdown:unknown action field
INIT:/etc/inittab[45]:shutdown:unknown action field
INIT:/etc/inittab[46]:shutdown:unknown action field
mount:Cannot read /proc/mounts:No such file or directory
enter runlevel:

按1或2后:
Jun 30 04:03:10 localhost syslog.info syslogd starded:BasyBox v1.2.0-pre0
Jun 30 04:03:10 localhost syslog.info system log demon exiting
INIT:Id "tty1" respawning too fast:disabled for 5 minutes
INIT:Id "tty2" respawning too fast:disabled for 5 minutes
不动了.

用<id>:<runlevels>:<action>:<process>后,enter runlevel: 问题解决.但还是有上述问题.希望有谁帮我看一下,头大了^-^.

abcdefgl123

问题一:
启动
.................
mounting unchecked running e2fsck is recommended
freeing unused kernel memory: 236k freed

不动了.        (重编内核后解决.)

-----------------------------------------------------------------
问题二:
启动
..................
ibm-acpi: ec object not found
isapnp: Sanning for PnP cards
isapnp: No Plug & Play device found

不动了.        (重编内核后解决.) (内核精简到最小,不相关的设备都不编入内核,不用模块.)
问题三:
启动
..................
INIT:/etc/inittab[18]:duplicate ID field "null"
INIT:/etc/inittab[19]:duplicate ID field "null"
INIT:/etc/inittab[20]:duplicate ID field "null"
INIT:/etc/inittab[21]:duplicate ID field "null"
INIT:/etc/inittab[22]:duplicate ID field "null"
INIT:/etc/inittab[24]:missing id field
INIT:/etc/inittab[34]:duplicate ID field "null"
INIT:/etc/inittab[35]:duplicate ID field "null"
INIT:/etc/inittab[36]:duplicate ID field "null"
INIT:/etc/inittab[40]:missing id field
INIT:/etc/inittab[43]:shutdown:unknown action field
INIT:/etc/inittab[44]:shutdown:unknown action field
INIT:/etc/inittab[45]:shutdown:unknown action field
INIT:/etc/inittab[46]:shutdown:unknown action field
mount:Cannot read /proc/mounts:No such file or directory
enter runlevel:

按1或2后:
Jun 30 04:03:10 localhost syslog.info syslogd starded:BasyBox v1.2.0-pre0
Jun 30 04:03:10 localhost syslog.info system log demon exiting
INIT:Id "tty1" respawning too fast:disabled for 5 minutes
INIT:Id "tty2" respawning too fast:disabled for 5 minutes
不动了.

用<id>:<runlevels>:<action>:<process>后,enter runlevel: 问题解决.但还是有上述问题.希望有谁帮我看一下,头大了^-^.

abcdefgl123

哈,已经解决.
# Begin /etc/inittab
id:3:initdefault:
0::sysinit:/etc/init.d/rcS
1::respawn:/sbin/getty 9600 tty0
2::respawn:/bin/sh
3::restart:/sbin/init
4::shutdown:/bin/umount -a –r

其余放入rcS:
/bin/mount -o remount,rw /
/bin/mount -t proc proc /proc
/bin/mount -a
/bin/hostname -F /etc/hostname
/sbin/ifconfig lo 127.0.0.1 up
/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
/sbin/ifconfig eth0 10.0.0.1 netmask 255.255.255.0