|
本人用红旗桌面5。用的主板为:http://product.pconline.com.cn/product/131/p131381.html
主板上的芯片为:
北桥芯片 nVIDIA GeForce 6100
南桥芯片 nForce410
上n卡主页:http://www.nvidia.com/object/linux_nforce_1.0-0310.html(本人为认是这个驱动)
这网页上写着:
This page contains drivers and documentation for the nForce chipset. The chipset
includes hardware support for IDE disk control, Ethernet networking, audio supp
ort, win modem support, and a USB controller. These packages have support for Et
hernet networking and basic ACI audio. USB and IDE hardware will work with stand
ard Linux drivers. There is no win modem support.
进入shell安装
root身份 $sh NFORCE-Linux-x86-1.0-0301-pkg1.run
出现:
Please select packages for installation:
NVIDIA network driver for Linux-x86 (1.0-13)
NVIDIA audio driver for Linux-x86 (1.0-7)
OK
按OK。
Please read the following LICENSE and then select either "Accept" to accept
the license and continue with the installation, or select "Do Not Accept" to
abort the installation.
Accept Do Not Accept
按accept
No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.
OK
按OK
ERROR:
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the appropriate nvidia-installer command line option.
OK
又按OK
ERROR: Installation of the network driver has failed. Please see the file
'/var/log/nvidia-nforce-installer.log' for details. You may find
suggestions on fixing installation problems in the README available
on the Linux driver download page at www.nvidia.com.
OK
又按OK,就跳出来了。装不了!!!!!!!
我的lspic 信息如下:
00:10.2 Multimedia audio controller: nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
Subsystem: nVidia Corporation: Unknown device cb84
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <ERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin C routed to IRQ 23
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
请帮助一下。谢谢! |
|