FC6安装ATI驱动问题.......

dyneluce

我的系统是FC6，显卡是ATI的X550 今天安装驱动，下了ati-driver-installer-8.33.6-x86.x86_64.run  用
[root@localhost ~]# sh ./ati-driver-installer-8.33.6-x86.x86_64.run --buildpkg Fedora/FC6
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.33.6............................................................
............................................................................
............................................................................
............................................................................
............................................................................
...........................................................................
............................................................................
.............................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Fedora/FC6
Please install an appropriate Linux kernel module build package.
./packages/Fedora/ati-packager.sh: line 105: [: missing `]'
./packages/Fedora/ati-packager.sh: line 105: FC6: command not found
Probably kernel-devel and kernel-headers in this case.
If you've compiled a custom kernel, make sure /usr/src/linux exists
and the source tree matches the currently running kernel.
Removing temporary directory: fglrx-install
怎样都不能解成3个RPM包....谁能教下FC6如何安装ATI驱动........

和尚娶媳妇

http://rpm.livna.org/fedora/6/i386/
有fc6的rpm好下载
人家已经打包好的，据称不方便在官方网上发布的软件在这个网上发布的
其中有mplayer

上周末将装了x1300的驱动，用的就是这个网上的驱动

dyneluce

我直接 sh ati-driver-installer-8.33.6-x86.x86_64.run 好像是装成功了3D驱动  但是却打不开驱动面板  显示
Failed to execute child process
"fireglcontrolpanel"(No such file or directory)
笨笨的问一下....应该要装哪些RPM包.....

和尚娶媳妇

xorg-x11-drv-fglrx-8.33.6-1.lvn6.i386.rpm
kmod-fglrx-8.33.6-1.2.6.18_1.2869.fc6.i686.rpm  这个包要选择和你的内核版本对应的rpm这里只是个列子

有可能会说还要kmod-fglrx-common这个rpm，找遍了，也没有，强行安装就行啦，不用理会，我在x1300下试过，没有kmod-fglrx-common也能正常工作。
rpm 强行安装的参数是--force

dyneluce

试试看 3Q

dyneluce

按照你的方法装了那两个RPM包，但是还是无法打开驱动面板 显示
Failed to execute child process
"fireglcontrolpanel"(No such file or directory)..........

和尚娶媳妇

我看过啦,xorg-x11-drv-fglrx-8.33.6-1.lvn6.i386.rpm包是带有fireglcontrolpanel的
在/usr/bin里,
不行,你就手动调用一下,可能是没找到.你是在哪里打开驱动面板的,看一下它的启动文件,路径给错了,我的想法.

ati官方提供的fireglcontrolpanel在/usr/X11R6/bin下
你用which fireglcontrolpanel查找这个文件的位置,
如果没有看一下PATH里是不是已经包含上面两个目录啦

dyneluce

装了驱动后无法打开3D桌面.........但是有个问题始终无法解决  为什么我始终无法sh ati-driver-installer-8.33.6.run --buildpkg Fedora/FC6 成3个RPM包.....
出错....
Generating package: Fedora/FC6
./packages/Fedora/ati-packager.sh: line 198: /etc/profile.d/qt.sh: No such file or directory
Removing temporary directory: fglrx-install

chinalights

warning: xorg-x11-drv-fglrx-8.33.6-1.lvn6.i386.rpm: Header V3 DSA signature: NOKEY, key ID a109b1ec
error: Failed dependencies:
        fglrx-kmod >= 8.33.6 is needed by xorg-x11-drv-fglrx-8.33.6-1.lvn6.i386

我用的强制安装也不行阿

isaccyaya

安装开源驱动 需要qt的 支持