求助：嵌入式pppoe客户端

jx1985 · 发表于 2007-1-26 22:21:39

嵌入式pppoe客户端要配置PPPD，我在PC上交叉编译了PPPD后放在嵌入式系统中出现这样的提示，请高手帮忙解决。
[root@AT91RM9200DK /dev]$pppd
pppd: pppd is unable to open the /dev/ppp device. You need to create the /dev/ppp device node by executing the following command as root: mknod /dev/ppp c 108 0
[root@AT91RM9200DK /dev]$mknod /dev/ppp c 108 0
[root@AT91RM9200DK /dev]$pppd
pppd: This system lacks kernel support for PPP. This could be because the PPP kernel module could not be loaded, or because PPP was not included in the kernel configuration. If PPP was included as a module, try `/sbin/modprobe -v ppp'. If that fails, check that ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.

DoDo · 发表于 2007-1-28 19:42:51

"This system lacks kernel support for PPP"

重新编译内核并打开 PPP 的支持。

jx1985 · 发表于 2007-1-29 18:33:21

我已经编译过了啊，编译这个需要注意什么啊，希望把具体步骤说下，谢谢

DoDo · 发表于 2007-1-29 23:06:02

自己多试试吧，把内核配置菜单仔细读上几遍，这过程中的收获是比解决一个PPP拨号的问题更有价值的

plaoxue · 发表于 2007-1-30 14:35:30

试过了啊,把PPP的都钩上啊,不然也不会来求助,说下要有什么要注意的啊.

		自动登录	找回密码
密码			注册