FC6下安装ATI X300显卡，报错，各位大哥我该如何作

lujinian

[root@MikeLuFedora software]# ./ati-driver-installer-8.33.6-x86.x86_64.run --buildpkg Fedora/FC6
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.33.6...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Fedora/FC6
./packages/Fedora/ati-packager.sh: line 198: /etc/profile.d/qt.sh: No such file or directory
Removing temporary directory: fglrx-install

诸葛亮的很

正准备换X300显卡呢。看来要放弃Linux了。

ajiejiejie

先把驱动权限改一下
chmod 777 ati-driver-installer-8.33.6-x86.x86_64.run

再试一下
sh ati-driver-installer-8.33.6-x86.x86_64.run --buildpkg Fedora/FC6

和尚娶媳妇

http://rpm.livna.org/上有ATI的显卡驱动，以前给我同学装过，

方法一，添加livna到你的yum库，使用yum安装

$rpm -ivh http://rpm.livna.org/livna-release-6.rpm  #安装livna程序库，如果已经安装，则略过此步
$yum install xorg-x11-drv-fglrx #安装ATI驱动fglrx,会安装两个包，一个是xorg-x11-drv-fglrx,另一个是kmod-fglrx

方法二，手动下载rpm,手动安装
下载地址如下
http://rpm.livna.org/fedora/6/i386/
下载的包为两个,xorg-x11-drv-fglrx,kmod-fglrx,库里会有多个版本的rpm,请下载您所要的版本，特别是kmod-fglrx的版本要和你所使用的内核版本对上
查看当前内核版本

$uname -r

dyneluce

不要在XEN内核 and  yum install qt-devel

诸葛亮的很

Post by 和尚娶媳妇
http://rpm.livna.org/上有ATI的显卡驱动，以前给我同学装过，

方法一，添加livna到你的yum库，使用yum安装

方法二，手动下载rpm,手动安装
下载地址如下
http://rpm.livna.org/fedora/6/i386/
下载的包为两个,xorg-x11-drv-fglrx,kmod-fglrx,库里会有多个版本的rpm,请下载您所要的版本，特别是kmod-fglrx的版本要和你所使用的内核版本对上
查看当前内核版本

就是那么简单么？不是说安装显卡驱动要改很多东西么？
我的是Intel 845GL的芯片组，不用安装驱动，没有遇到过。

lujinian

我没有在xen下运行，我会尝试一下大家给的方法。

和尚娶媳妇

Post by 诸葛亮的很
就是那么简单么？不是说安装显卡驱动要改很多东西么？

livna上有做好的rpm包,所有的事rpm都会帮你做好

Post by 诸葛亮的很
我的是Intel 845GL的芯片组，不用安装驱动，没有遇到过。

845驱动早就集成到i810里啦,不是不用安装,是在装系统的时候就给你装好啦.

lujinian

$rpm -ivh http://rpm.livna.org/livna-release-6.rpm #安装livna程序库，如果已经安装，则略过此步
$yum install xorg-x11-drv-fglrx #安装ATI驱动fglrx,会安装两个包，一个是xorg-x11-drv-fglrx,另一个是kmod-fglrx
安装完成后，还是启动不了effects

dyneluce

[root@localhost ~]# rpm -ivh kernel-2.6.18-1.2798.fc6.i686.rpm
[root@localhost ~]# rpm -ivh kernel-devel-2.6.18-1.2798.fc6.i686.rpm
restart computer  从新内核进入
[root@localhost ~]# ln -sf /usr/src/kernels/$(uname -r)-$(uname -m) /usr/src/linux
= ======================================================================
[root@localhost ~]# yum install qt-devel
安装了qt-3.3.7-0.1.fc6.i386.rpm和qt-devel-3.3.7-0.1.fc6.i386.rpm后
[root@localhost ~]# chmod +x ati-driver-installer-8.32.5-x86.x86_64.run
[root@localhost ~]# ./ati-driver-installer-8.32.5-x86.x86_64.run --buildpkg Fedora/FC6
[root@localhost ~]# rpm -ivh kernel-module-ATI-fglrx-2.6.18-1.2798.fc6-8.29.6-1.fc6.i386.rpm
[root@localhost ~]# rpm -ivh ATI-fglrx-8.29.6-1.fc6.i386.rpm
[root@localhost ~]# rpm -ivh ATI-fglrx-control-panel-8.29.6-1.fc6.i386.rpm
[root@localhost ~]# rpm -ivh ATI-fglrx-devel-8.29.6-1.fc6.i386.rpm
Restart computer
= ====================================================================
[root@localhost ~]# uname -r
2.6.18-1.2798.fc6
[root@localhost ~]# unmae -m
i686
[root@localhost ~]# rpm -qa|grep compiz
compiz-0.0.13-0.32.20060817git.fc6
[root@localhost ~]# rpm -e compiz 2> /dev/null
[root@localhost ~]# rpm -ivh glitz-0.5.6-5.fc6.i386.rpm
[root@localhost ~]# rpm -ivh glitz-glx-0.5.6-5.fc6.i386.rpm
[root@localhost ~]# rpm -ivh libsvg-0.1.4-1.i386.rpm
[root@localhost ~]# rpm -ivh libsvg-cairo-0.1.6-1.i386.rpm
[root@localhost ~]# rpm -ivh xorg-x11-server-Xgl-1.1.99.1-3.i386.rpm
[root@localhost ~]# rpm -ivh xgl-hardware-list-1.0.0-2.noarch.rpm
[root@localhost ~]# rpm -ivh gset-compiz-0.3.3-1.i386.rpm
[root@localhost ~]# rpm -ivh fedora-xgl-settings-0.0.1-2.noarch.rpm
[root@localhost ~]# rpm -ivh compiz-1.0.0-5.i386.rpm
[root@localhost ~]# gnome-xgl-switch --enable-xgl --auto
Do you want to apply the modifications now? (y/n) : y

Attention !!! save you current documents before press any key to this terminal, GDM must be restarted for applying this settings...
= =====================================================================
注意: 如果先安装了显卡驱动，那么这这里按任意键之前要
[root@localhost ~]# vim /etc/X11/xorg.conf
加入
  Section "Extensions"
   Option "Composite" "False"
  EndSection
段。否则看不到图形界面。