求助：关于使用MADWIFI建AP

bryant_li

ＨＡＲＤＷＲＡＥ　：Ｉｎｔｅｌ　９６５Ｐ　＋　ＣＯＲＥ６３００　＋　ｒｅａｌｔｅｋ　８１６８　ＮＩＣ　＋　Ｔｐｌｉｎｋ　ＷＮ５５０Ｇ

ＳＯＦＴＷＡＲＥ　：　ＣＥＮＴＯＳ４。２　＋　ＭＡＤＷＩＦＩ　０。９。１


装驱动过程成中没有出错，，运行Dmseg|grep wifi结果如下

[root@localhost /]# dmesg |grep wifi
divert: not allocating divert_blk for non-ethernet device wifi0
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xfeaf0000, irq=209
divert: no divert_blk to free, wifi0 not ethernet
divert: not allocating divert_blk for non-ethernet device wifi0
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xfeaf0000, irq=209
divert: no divert_blk to free, wifi0 not ethernet
divert: not allocating divert_blk for non-ethernet device wifi0
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xfeaf0000, irq=209

接着我运行如下命令：
[root@localhost /]# wlanconfig ath0 create wlandev wifi0 wlanmode ap
提示如下：
wlanconfig: ioctl: Input/output error

有大虾知道这是什么原因么，，感激不尽，，

Yuri

madwifi是不是对网卡有限制啊，应该不是所有网卡他都能支持的，还有驱动版本。

Yuri

Requirements :
Hardware :
Wireless Card :
A PCI/miniPCI or Cardbus card with an Atheros chipset

你看看这个
http://madwifi.org/wiki/Requirements

hihihihi

modprobe ath_pci autocreate=ap

iceman7803

应该先运行：wlanconfig ath0 destory。
另外我的看起来成功了，不过clint连接到ap后ping不通ap。不知道什么原因？请高手们指教谢谢！

konds

ifconfig -a 贴一下