求教：opensuse11.1程序里面的xsane设置！（已解决！）

3897645321

各位DX好
前天安装的opensuse11.1，苦于没有找到如何安装扫描仪的方法，但是昨天再仔细的看了下程序那里，发现有一个叫xsane的程序可以驱动扫描仪的，所以尝试了一下，结果可以在终端以超级管理员权限打开，进去后扫描了一张图片，当它扫描完成显示该图片出来后，我打开扫描仪时发现扫描仪并没有归位，但是我没有理会就再想扫描一下，谁知道点扫描后就出现“卡卡”的声音，我想应该是上次扫描没有归位，当我第二次扫描的时候它继续往后移所造成的，无奈下把扫描仪电源拔掉了，再重新插上电源后问题就来了，不知道为什么再也找不到扫描仪了，root权限下终端输入“xsane”后出现“[snapscan] Cannot open firmware file /usr/share/sane/snapscan/your-firmwarefile.bin.
[snapscan] Edit the firmware file entry in snapscan.conf.”错误！
另外输入“sudo sane-find-scanner /dev/usb/scanner0”后出现的是如下
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
上面有一句居然说没有找到usb扫描仪。麻烦各位教教我现在该如何解决！（在xp下面扫描仪还是可以正常使用的，所以扫描仪应该是没有问题的！）谢谢！

3897645321

回自己的，原来之前还没等它归位就继续扫描的华就会出现这种情况，只要重启就没事了，现在暂时可以使用，只是扫描黑白的时候会出现问题。谢谢大家进来阅读！