VMware 7中Fedora 13，NAT模式上网的问题

shaoow

配置VMware 7，Fedora 13

     刚刚装了Fedora 13，想让虚拟机上网，家里是电信的ADSL，以前是通过路由用bridge上网的，家里没有路由，于是虚拟机想通过NAT模式上网
     按照网上的介绍设置eth0（就一块网卡）为DHCP，自动获取DNS，查看网络连接发现，eth0为从不活动状态，使用命令ifup eth0想启动网卡，出现错误
Error: Connection activation failed: Device not managed by NetworkManager

请问这是什么情况呢，上网查了半天也没发现为什么

************************************分割线***************************************************************
上一个问题已经解决，解决方法如下：
Open SSH With root permissions and try this!

1. Remove Network Manager from startup Services.
chkconfig NetworkManager off

2. Add Default Net Manager
chkconfig network on

Stop NetworkManager first
service NetworkManager stop

and then start Default Manager
service network start



or you can change it easy:

system-config-network
uncheck the box that sets the eth0 as managed by NetworkManager and set IP info from there.

system-config-services
stop and disable NetworkManager , start and enable network

you have problem because both of NetworkManager and Network using same Network driver and default network blocking access for NetworkManager. if you disable NetworkManager your problem will disappeared after restart.

***************************************************分割线***************************************************************************
但是，又产生了新的问题
在service network Start的时候
*出环回接口：                                             [确定]
*出界面 eth0：
正在决定 eth0 的 IP 信息...失败了。
                                                           [失败]
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists

这是为什么呢，感觉像是DHCP自动分配IP失败，但是是什么导致的呢？怎么解决，各位大哥帮帮忙

_ilinux

t's easy, just do this:

Open SSH With root permissions and try this!

1. Remove Network Manager from startup Services.
chkconfig NetworkManager off

2. Add Default Net Manager
chkconfig network on

Stop NetworkManager first
service NetworkManager stop

and then start Default Manager
service network start



or you can change it easy:

system-config-network
uncheck the box that sets the eth0 as managed by NetworkManager and set IP info from there.

system-config-services
stop and disable NetworkManager , start and enable network

you have problem because both of NetworkManager and Network using same Network driver and default network blocking access for NetworkManager. if you disable NetworkManager your problem will disappeared after restart.

tnx.
Reply With Quote

shaoow

那个问题已经解决了，用上面的方法，发现，还是不行，关闭networkManager后，还是不能上网