|
我的gnome怎么了?
我都按照手册按照手册安装,貌似都没有没什么问题
但是我的画面很不清楚,页面滚动起来有拖痕,
我截图了两张,有经验的朋友可以指导一下我不?
lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03)
xorg.0.log
[ 100.739]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 100.739] X Protocol Version 11, Revision 0
[ 100.739] Build Operating System: Linux 2.6.39-gentoo-r3 i686 Gentoo
[ 100.739] Current Operating System: Linux mybox-hp 2.6.39-gentoo-r3 #6 SMP Thu Sep 8 11:00:16 Local time zone must be set--see zic m i686
[ 100.739] Kernel command line: root=/dev/sda5
[ 100.739] Build Date: 03 September 2011 03:39:14PM
[ 100.739]
[ 100.739] Current version of pixman: 0.22.0
[ 100.739] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 100.740] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 100.740] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 9 08:59:49 2011
[ 100.740] (==) Using config file: "/etc/X11/xorg.conf"
[ 100.740] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 100.740] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 100.741] (==) ServerLayout "X.org Configured"
[ 100.741] (**) |-->Screen "Screen0" (0)
[ 100.741] (**) | |-->Monitor "Monitor0"
[ 100.741] (**) | |-->Device "Card0"
[ 100.741] (**) |-->Input Device "Mouse0"
[ 100.741] (**) |-->Input Device "Keyboard0"
[ 100.741] (==) Automatically adding devices
[ 100.741] (==) Automatically enabling devices
[ 100.741] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 100.741] Entry deleted from font path.
[ 100.741] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 100.741] Entry deleted from font path.
[ 100.741] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 100.741] Entry deleted from font path.
[ 100.741] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 100.741] Entry deleted from font path.
[ 100.741] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 100.741] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 100.741] Entry deleted from font path.
[ 100.741] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 100.741] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 100.741] Entry deleted from font path.
[ 100.741] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 100.741] Entry deleted from font path.
[ 100.741] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 100.741] Entry deleted from font path.
[ 100.742] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 100.742] Entry deleted from font path.
[ 100.742] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 100.742] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 100.742] Entry deleted from font path.
[ 100.742] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 100.742] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/misc/
[ 100.742] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 100.742] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 100.742] (WW) Disabling Mouse0
[ 100.742] (WW) Disabling Keyboard0
[ 100.742] (II) Loader magic: 0x81e2d00
[ 100.742] (II) Module ABI versions:
[ 100.742] X.Org ANSI C Emulation: 0.4
[ 100.742] X.Org Video Driver: 10.0
[ 100.742] X.Org XInput driver : 12.2
[ 100.742] X.Org Server Extension : 5.0
[ 100.743] (--) PCI:*(0:0:2:0) 8086:2572:103c:12bc rev 2, Mem @ 0xf0000000/134217728, 0xfc400000/524288, I/O @ 0x000014e0/8
[ 100.743] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 100.743] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 100.743] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 100.743] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 100.743] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 100.743] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 100.743] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 100.743] (II) LoadModule: "record"
[ 100.743] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 100.743] (II) Module record: vendor="X.Org Foundation"
[ 100.743] compiled for 1.10.2, module version = 1.13.0
[ 100.743] Module class: X.Org Server Extension
[ 100.743] ABI class: X.Org Server Extension, version 5.0
[ 100.743] (II) Loading extension RECORD
[ 100.743] (II) LoadModule: "dbe"
[ 100.744] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 100.744] (II) Module dbe: vendor="X.Org Foundation"
[ 100.744] compiled for 1.10.2, module version = 1.0.0
[ 100.744] Module class: X.Org Server Extension
[ 100.744] ABI class: X.Org Server Extension, version 5.0
[ 100.744] (II) Loading extension DOUBLE-BUFFER
[ 100.744] (II) LoadModule: "extmod"
[ 100.744] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 100.744] (II) Module extmod: vendor="X.Org Foundation"
[ 100.744] compiled for 1.10.2, module version = 1.0.0
[ 100.744] Module class: X.Org Server Extension
[ 100.744] ABI class: X.Org Server Extension, version 5.0
[ 100.744] (II) Loading extension MIT-SCREEN-SAVER
[ 100.744] (II) Loading extension XFree86-VidModeExtension
[ 100.744] (II) Loading extension XFree86-DGA
[ 100.744] (II) Loading extension DPMS
[ 100.744] (II) Loading extension XVideo
[ 100.744] (II) Loading extension XVideo-MotionCompensation
[ 100.744] (II) Loading extension X-Resource
[ 100.744] (II) LoadModule: "dri2"
[ 100.745] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 100.745] (II) Module dri2: vendor="X.Org Foundation"
[ 100.745] compiled for 1.10.2, module version = 1.2.0
[ 100.745] ABI class: X.Org Server Extension, version 5.0
[ 100.745] (II) Loading extension DRI2
[ 100.745] (II) LoadModule: "dri"
[ 100.745] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 100.745] (II) Module dri: vendor="X.Org Foundation"
[ 100.745] compiled for 1.10.2, module version = 1.0.0
[ 100.746] ABI class: X.Org Server Extension, version 5.0
[ 100.746] (II) Loading extension XFree86-DRI
[ 100.746] (II) LoadModule: "glx"
[ 100.746] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 100.746] (II) Module glx: vendor="X.Org Foundation"
[ 100.746] compiled for 1.10.2, module version = 1.0.0
[ 100.746] ABI class: X.Org Server Extension, version 5.0
[ 100.746] (==) AIGLX enabled
[ 100.746] (II) Loading extension GLX
[ 100.746] (II) LoadModule: "intel"
[ 100.746] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 100.747] (II) Module intel: vendor="X.Org Foundation"
[ 100.747] compiled for 1.10.2, module version = 2.14.0
[ 100.747] Module class: X.Org Video Driver
[ 100.747] ABI class: X.Org Video Driver, version 10.0
[ 100.747] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 100.747] (--) using VT number 7
[ 100.760] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 100.760] drmOpenDevice: node name is /dev/dri/card0
[ 100.761] drmOpenDevice: open result is 8, (OK)
[ 100.761] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 100.761] drmOpenDevice: node name is /dev/dri/card0
[ 100.761] drmOpenDevice: open result is 8, (OK)
[ 100.761] drmOpenByBusid: drmOpenMinor returns 8
[ 100.761] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 100.761] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 100.761] (==) intel(0): RGB weight 888
[ 100.761] (==) intel(0): Default visual is TrueColor
[ 100.761] (II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
[ 100.761] (--) intel(0): Chipset: "865G"
[ 100.761] (**) intel(0): Tiling enabled
[ 100.761] (**) intel(0): SwapBuffers wait enabled
[ 100.761] (==) intel(0): video overlay key set to 0x101fe
[ 100.873] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 100.980] (II) intel(0): EDID for output VGA1
[ 100.980] (II) intel(0): Manufacturer: SAM Model: 4f26 Serial#: 0
[ 100.980] (II) intel(0): Year: 1999 Week: 4
[ 100.980] (II) intel(0): EDID Version: 1.1
[ 100.980] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 100.980] (II) intel(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[ 100.980] (II) intel(0): Max Image Size [cm]: horiz.: 36 vert.: 27
[ 100.980] (II) intel(0): Gamma: 2.28
[ 100.980] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/color Display
[ 100.980] (II) intel(0): redX: 0.638 redY: 0.325 greenX: 0.276 greenY: 0.596
[ 100.980] (II) intel(0): blueX: 0.143 blueY: 0.066 whiteX: 0.283 whiteY: 0.298
[ 100.980] (II) intel(0): Supported established timings:
[ 100.980] (II) intel(0): 720x400@70Hz
[ 100.980] (II) intel(0): 720x400@88Hz
[ 100.980] (II) intel(0): 640x480@60Hz
[ 100.980] (II) intel(0): 640x480@67Hz
[ 100.980] (II) intel(0): 640x480@72Hz
[ 100.980] (II) intel(0): 640x480@75Hz
[ 100.980] (II) intel(0): 800x600@56Hz
[ 100.980] (II) intel(0): 800x600@60Hz
[ 100.980] (II) intel(0): 800x600@72Hz
[ 100.980] (II) intel(0): 800x600@75Hz
[ 100.980] (II) intel(0): 832x624@75Hz
[ 100.980] (II) intel(0): 1024x768@87Hz (interlaced)
[ 100.980] (II) intel(0): 1024x768@60Hz
[ 100.980] (II) intel(0): 1024x768@70Hz
[ 100.980] (II) intel(0): 1024x768@75Hz
[ 100.980] (II) intel(0): 1280x1024@75Hz
[ 100.980] (II) intel(0): 1152x864@75Hz
[ 100.980] (II) intel(0): Manufacturer's mask: 0
[ 100.980] (II) intel(0): Supported standard timings:
[ 100.980] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 100.980] (II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 100.980] (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 100.980] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[ 100.980] (II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
[ 100.980] (II) intel(0): #5: hsize: 1024 vsize 768 refresh: 100 vid: 26721
[ 100.980] (II) intel(0): Supported detailed timing:
[ 100.980] (II) intel(0): clock: 113.3 MHz Image Size: 352 x 264 mm
[ 100.980] (II) intel(0): h_active: 1024 h_sync: 1096 h_sync_end 1208 h_blank_end 1392 h_border: 0
[ 100.981] (II) intel(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 814 v_border: 0
[ 100.981] (II) intel(0): Supported detailed timing:
[ 100.981] (II) intel(0): clock: 157.5 MHz Image Size: 330 x 264 mm
[ 100.981] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
[ 100.981] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
[ 100.981] (II) intel(0): Supported detailed timing:
[ 100.981] (II) intel(0): clock: 202.5 MHz Image Size: 352 x 264 mm
[ 100.981] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[ 100.981] (II) intel(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[ 100.981] (II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 215 MHz
[ 100.981] (II) intel(0): EDID (in hex):
[ 100.981] (II) intel(0): 00ffffffffffff004c2d264f00000000
[ 100.981] (II) intel(0): 040901010f241b80e85e89a353469824
[ 100.981] (II) intel(0): 11484cffff803159455961598199a94f
[ 100.981] (II) intel(0): 616801010101432c007041002e304870
[ 100.981] (II) intel(0): 130060081100001c863d00c051003040
[ 100.981] (II) intel(0): 40a013004a081100001e1a4f403062b0
[ 100.981] (II) intel(0): 324040c0130060081100001e000000fd
[ 100.981] (II) intel(0): 0032a01e6015000a20202020202000c7
[ 100.981] (II) intel(0): EDID vendor "SAM", prod id 20262
[ 100.981] (II) intel(0): Using EDID range info for horizontal sync
[ 100.981] (II) intel(0): Using EDID range info for vertical refresh
[ 100.981] (II) intel(0): Printing DDC gathered Modelines:
[ 100.981] (II) intel(0): Modeline "1024x768"x0.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 100.981] (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 100.981] (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 100.981] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 100.981] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 100.981] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 100.981] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 100.981] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 100.981] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 100.981] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 100.981] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 100.981] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 100.981] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 100.981] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 100.981] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 100.981] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 100.981] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 100.981] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 100.981] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 100.981] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 100.981] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 100.981] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 100.981] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 100.982] (II) intel(0): Printing probed modes for output VGA1
[ 100.982] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 100.982] (II) intel(0): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 100.982] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 100.982] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 100.982] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 100.982] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 100.982] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 100.982] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 100.982] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 100.982] (II) intel(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
[ 100.982] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 100.982] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 100.982] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 100.982] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 100.982] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 100.982] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 100.982] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 100.982] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 100.982] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 100.982] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 100.982] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 100.982] (II) intel(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 100.982] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 100.982] (II) intel(0): Output VGA1 connected
[ 100.982] (II) intel(0): Using user preference for initial modes
[ 100.982] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 100.982] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 100.982] (II) intel(0): Kernel page flipping support detected, enabling
[ 100.982] (**) intel(0): Display dimensions: (360, 270) mm
[ 100.982] (**) intel(0): DPI set to (72, 72)
[ 100.982] (II) Loading sub module "fb"
[ 100.982] (II) LoadModule: "fb"
[ 100.982] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 100.983] (II) Module fb: vendor="X.Org Foundation"
[ 100.983] compiled for 1.10.2, module version = 1.0.0
[ 100.983] ABI class: X.Org ANSI C Emulation, version 0.4
[ 100.983] (==) Depth 24 pixmap format is 32 bpp
[ 100.983] (==) intel(0): VideoRam: 131072 KB
[ 100.983] (II) intel(0): [DRI2] Setup complete
[ 100.983] (II) intel(0): [DRI2] DRI driver: i915
[ 100.983] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 100.983] (II) UXA(0): Driver registered support for the following operations:
[ 100.983] (II) solid
[ 100.983] (II) copy
[ 100.983] (II) composite (RENDER acceleration)
[ 100.983] (II) put_image
[ 100.983] (II) get_image
[ 100.983] (==) intel(0): Backing store disabled
[ 100.983] (==) intel(0): Silken mouse enabled
[ 100.983] (II) intel(0): Initializing HW Cursor
[ 101.036] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 101.036] (==) intel(0): DPMS enabled
[ 101.036] (II) intel(0): Set up overlay video
[ 101.036] (II) intel(0): direct rendering: DRI2 Enabled
[ 101.036] (==) intel(0): hotplug detection: "enabled"
[ 101.037] (--) RandR disabled
[ 101.037] (II) Initializing built-in extension Generic Event Extension
[ 101.037] (II) Initializing built-in extension SHAPE
[ 101.037] (II) Initializing built-in extension MIT-SHM
[ 101.037] (II) Initializing built-in extension XInputExtension
[ 101.037] (II) Initializing built-in extension XTEST
[ 101.037] (II) Initializing built-in extension BIG-REQUESTS
[ 101.037] (II) Initializing built-in extension SYNC
[ 101.037] (II) Initializing built-in extension XKEYBOARD
[ 101.037] (II) Initializing built-in extension XC-MISC
[ 101.037] (II) Initializing built-in extension XINERAMA
[ 101.037] (II) Initializing built-in extension XFIXES
[ 101.037] (II) Initializing built-in extension RENDER
[ 101.037] (II) Initializing built-in extension RANDR
[ 101.037] (II) Initializing built-in extension COMPOSITE
[ 101.037] (II) Initializing built-in extension DAMAGE
[ 101.054] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 101.054] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 101.054] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 101.054] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 101.054] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 101.055] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[ 101.055] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 101.055] (II) intel(0): Setting screen physical size to 270 x 203
[ 101.121] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 101.121] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 101.121] (II) LoadModule: "evdev"
[ 101.121] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 101.122] (II) Module evdev: vendor="X.Org Foundation"
[ 101.122] compiled for 1.10.2, module version = 2.6.0
[ 101.122] Module class: X.Org XInput Driver
[ 101.122] ABI class: X.Org XInput driver, version 12.2
[ 101.122] (II) Using input driver 'evdev' for 'Power Button'
[ 101.122] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 101.122] (**) Power Button: always reports core events
[ 101.122] (**) Power Button: Device: "/dev/input/event1"
[ 101.122] (--) Power Button: Found keys
[ 101.122] (II) Power Button: Configuring as keyboard
[ 101.122] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 101.122] (II) XINPUT: Adding extended input device "ower Button" (type: KEYBOARD)
[ 101.122] (**) Option "xkb_rules" "evdev"
[ 101.122] (**) Option "xkb_model" "evdev"
[ 101.122] (**) Option "xkb_layout" "us"
[ 101.155] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 101.155] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 101.155] (II) Using input driver 'evdev' for 'Power Button'
[ 101.155] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 101.155] (**) Power Button: always reports core events
[ 101.155] (**) Power Button: Device: "/dev/input/event0"
[ 101.155] (--) Power Button: Found keys
[ 101.155] (II) Power Button: Configuring as keyboard
[ 101.155] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 101.155] (II) XINPUT: Adding extended input device "ower Button" (type: KEYBOARD)
[ 101.155] (**) Option "xkb_rules" "evdev"
[ 101.155] (**) Option "xkb_model" "evdev"
[ 101.155] (**) Option "xkb_layout" "us"
[ 101.159] (II) config/udev: Adding input device MLK RAPOO 3100 (/dev/input/event3)
[ 101.159] (**) MLK RAPOO 3100: Applying InputClass "evdev pointer catchall"
[ 101.159] (**) MLK RAPOO 3100: Applying InputClass "evdev keyboard catchall"
[ 101.159] (II) Using input driver 'evdev' for 'MLK RAPOO 3100'
[ 101.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 101.159] (**) MLK RAPOO 3100: always reports core events
[ 101.159] (**) MLK RAPOO 3100: Device: "/dev/input/event3"
[ 101.159] (--) MLK RAPOO 3100: Found 9 mouse buttons
[ 101.159] (--) MLK RAPOO 3100: Found scroll wheel(s)
[ 101.159] (--) MLK RAPOO 3100: Found relative axes
[ 101.159] (--) MLK RAPOO 3100: Found x and y relative axes
[ 101.159] (--) MLK RAPOO 3100: Found absolute axes
[ 101.159] (--) MLK RAPOO 3100: Found keys
[ 101.159] (II) MLK RAPOO 3100: Configuring as mouse
[ 101.159] (II) MLK RAPOO 3100: Configuring as keyboard
[ 101.159] (II) MLK RAPOO 3100: Adding scrollwheel support
[ 101.159] (**) MLK RAPOO 3100: YAxisMapping: buttons 4 and 5
[ 101.159] (**) MLK RAPOO 3100: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 101.159] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3/event3"
[ 101.159] (II) XINPUT: Adding extended input device "MLK RAPOO 3100" (type: KEYBOARD)
[ 101.159] (**) Option "xkb_rules" "evdev"
[ 101.159] (**) Option "xkb_model" "evdev"
[ 101.159] (**) Option "xkb_layout" "us"
[ 101.159] (II) MLK RAPOO 3100: initialized for relative axes.
[ 101.159] (WW) MLK RAPOO 3100: ignoring absolute axes.
[ 101.160] (**) MLK RAPOO 3100: (accel) keeping acceleration scheme 1
[ 101.160] (**) MLK RAPOO 3100: (accel) acceleration profile 0
[ 101.160] (**) MLK RAPOO 3100: (accel) acceleration factor: 2.000
[ 101.160] (**) MLK RAPOO 3100: (accel) acceleration threshold: 4
[ 101.160] (II) config/udev: Adding input device MLK RAPOO 3100 (/dev/input/mouse0)
[ 101.160] (II) No input driver/identifier specified (ignoring)
[ 101.168] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 101.168] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 101.168] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 101.168] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 101.169] (**) AT Translated Set 2 keyboard: always reports core events
[ 101.169] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 101.169] (--) AT Translated Set 2 keyboard: Found keys
[ 101.169] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 101.169] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 101.169] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 101.169] (**) Option "xkb_rules" "evdev"
[ 101.169] (**) Option "xkb_model" "evdev"
[ 101.169] (**) Option "xkb_layout" "us"
[ 103.640] (II) intel(0): EDID vendor "SAM", prod id 20262
[ 103.640] (II) intel(0): Using hsync ranges from config file
[ 103.640] (II) intel(0): Using vrefresh ranges from config file
[ 103.640] (II) intel(0): Printing DDC gathered Modelines:
[ 103.640] (II) intel(0): Modeline "1024x768"x0.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 103.640] (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 103.640] (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 103.640] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 103.640] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 103.640] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 103.640] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 103.640] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 103.640] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 103.640] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 103.640] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 103.640] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 103.641] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 103.641] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 103.641] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 103.641] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 103.641] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 103.641] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 103.641] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 103.641] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 103.641] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 103.641] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 103.641] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 103.750] (II) intel(0): EDID vendor "SAM", prod id 20262
[ 103.750] (II) intel(0): Using hsync ranges from config file
[ 103.750] (II) intel(0): Using vrefresh ranges from config file
[ 103.750] (II) intel(0): Printing DDC gathered Modelines:
[ 103.750] (II) intel(0): Modeline "1024x768"x0.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 103.750] (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 103.750] (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 103.750] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 103.750] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 103.750] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 103.750] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 103.750] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 103.750] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 103.750] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 103.750] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 103.750] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 103.750] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 103.750] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 103.750] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 103.750] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 103.750] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 103.750] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 103.750] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 103.750] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 103.750] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 103.750] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 103.750] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 103.884] (II) intel(0): EDID vendor "SAM", prod id 20262
[ 103.884] (II) intel(0): Using hsync ranges from config file
[ 103.884] (II) intel(0): Using vrefresh ranges from config file
[ 103.884] (II) intel(0): Printing DDC gathered Modelines:
[ 103.884] (II) intel(0): Modeline "1024x768"x0.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 103.884] (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 103.884] (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 103.884] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 103.884] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 103.884] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 103.884] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 103.884] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 103.884] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 103.884] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 103.884] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 103.884] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 103.884] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 103.884] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 103.884] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 103.884] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 103.884] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 103.884] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 103.884] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 103.884] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 103.884] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 103.884] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 103.884] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 109.083] (II) intel(0): EDID vendor "SAM", prod id 20262
[ 109.083] (II) intel(0): Using hsync ranges from config file
[ 109.083] (II) intel(0): Using vrefresh ranges from config file
[ 109.083] (II) intel(0): Printing DDC gathered Modelines:
[ 109.083] (II) intel(0): Modeline "1024x768"x0.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 109.083] (II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 109.083] (II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 109.083] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 109.083] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 109.083] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 109.083] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 109.083] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 109.083] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 109.083] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 109.083] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 109.083] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 109.083] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 109.083] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 109.083] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 109.083] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 109.083] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 109.083] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 109.083] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 109.083] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 109.083] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 109.083] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 109.083] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -march=pentium4 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="i686-pc-linux-gnu"
#MAKEOPTS="-j3"
LINGUAS="zh_CN zh en_US"
ACCPET_KEYWORDS="~x86"
INPUT_DEVICES="evdev"
VIDEO_CARDS="intel"
ALSA_CARDS="intel8x0"
FEATURES="ccache parallel-fetch"
CCACHE_DIR="/var/tmp/ccache"
CCACHE_SIZE="2G"
USE="-kde -qt4 -qt -ipv6 -debug -dmx -sdl -kdrive -minimal -xprint \
X xorg gnome gtk jpeg alsa dbus udev firefox "
GENTOO_MIRRORS="http://mirrors.163.com/gentoo/"
SYNC="rsync://rsync.cn.gentoo.org/gentoo-portage" |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册
x
|