为什么xorg.conf中的gamma设置无效。

小楼东风 · 发表于 2011-9-11 14:59:55

我的显示器默认gamma 1.0太暗，每次进入kde都要在系统设置里面更改gamma值太麻烦，就用Xorg -configure    生成的文件改为xorg.conf存放于/etx/X11下，内容如下，但是无论写为
Gamma       1.35
还是
Gamma       1.35  1.35  1.35
都没有起作用，我还是要在每次启动kde之后修改gamma值，我的配置文件错在哪里？

Section "ServerLayout"
      Identifier    "X.org Configured"
      Screen    0  "Screen0" 0 0
      InputDevice "Mouse0" "CorePointer"
      InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
      ModulePath "/usr/lib64/xorg/modules"
      FontPath    "/usr/share/fonts/misc/"
      FontPath    "/usr/share/fonts/TTF/"
      FontPath    "/usr/share/fonts/OTF/"
      FontPath    "/usr/share/fonts/Type1/"
      FontPath    "/usr/share/fonts/100dpi/"
      FontPath    "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
      Load  "dbe"
      Load  "dri2"
      Load  "v4l"
      Load  "glx"
      Load  "extmod"
      Load  "dri"
      Load  "record"
EndSection

Section "InputDevice"
      Identifier  "Keyboard0"
      Driver    "kbd"
EndSection

Section "InputDevice"
      Identifier  "Mouse0"
      Driver    "mouse"
      Option    "

rotocol" "auto"
 Option "Device" "/dev/input/mice"
 Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
 #DisplaySize 510 290 # mm
 Modeline "1904x1080_60.00" 171.72 1904 2024 2232 2560 1080 1081 1084 1118 -HSync +Vsync
 Gamma 1.35
 Identifier "Monitor0"
 VendorName "SAM"
 ModelName "SyncMaster"
 HorizSync 30.0 - 81.0
 VertRefresh 56.0 - 75.0
 Option "DPMS"
EndSection

Section "Device"
 ### Available Driver options are:-
 ### Values: : integer, <f>: float, <bool>: "True"/"False",
 ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
 ### <percent>: "<f>%"
 ### [arg]: arg optional
 #Option "NoAccel" # [<bool>]
 #Option "SWcursor" # [<bool>]
 #Option "Dac6Bit" # [<bool>]
 #Option "Dac8Bit" # [<bool>]
 #Option "BusType" # [<str>]
 #Option "CPPIOMode" # [<bool>]
 #Option "CPusecTimeout" # 
 #Option "AGPMode" # 
 #Option "AGPFastWrite" # [<bool>]
 #Option "AGPSize" # 
 #Option "GARTSize" # 
 #Option "RingSize" # 
 #Option "BufferSize" # 
 #Option "EnableDepthMoves" # [<bool>]
 #Option "EnablePageFlip" # [<bool>]
 #Option "NoBackBuffer" # [<bool>]
 #Option "DMAForXv" # [<bool>]
 #Option "FBTexPercent" # 
 #Option "DepthBits" # 
 #Option "

CIAPERSize" # 
 #Option "AccelDFS" # [<bool>]
 #Option "IgnoreEDID" # [<bool>]
 #Option "CustomEDID" # [<str>]
 #Option "DisplayPriority" # [<str>]
 #Option "

anelSize" # [<str>]
 #Option "ForceMinDotClock" # <freq>
 #Option "ColorTiling" # [<bool>]
 #Option "VideoKey" # 
 #Option "RageTheatreCrystal" # 
 #Option "RageTheatreTunerPort" # 
 #Option "RageTheatreCompositePort" # 
 #Option "RageTheatreSVideoPort" # 
 #Option "TunerType" # 
 #Option "RageTheatreMicrocPath" # <str>
 #Option "RageTheatreMicrocType" # <str>
 #Option "ScalerWidth" # 
 #Option "RenderAccel" # [<bool>]
 #Option "SubPixelOrder" # [<str>]
 #Option "ClockGating" # [<bool>]
 #Option "VGAAccess" # [<bool>]
 #Option "ReverseDDC" # [<bool>]
 #Option "LVDSProbePLL" # [<bool>]
 #Option "AccelMethod" # <str>
 #Option "DRI" # [<bool>]
 #Option "ConnectorTable" # <str>
 #Option "DefaultConnectorTable" # [<bool>]
 #Option "DefaultTMDSPLL" # [<bool>]
 #Option "TVDACLoadDetect" # [<bool>]
 #Option "ForceTVOut" # [<bool>]
 #Option "TVStandard" # <str>
 #Option "IgnoreLidStatus" # [<bool>]
 #Option "DefaultTVDACAdj" # [<bool>]
 #Option "Int10" # [<bool>]
 #Option "EXAVSync" # [<bool>]
 #Option "ATOMTVOut" # [<bool>]
 #Option "R4xxATOM" # [<bool>]
 #Option "ForceLowPowerMode" # [<bool>]
 #Option "DynamicPM" # [<bool>]
 #Option "NewPLL" # [<bool>]
 #Option "ZaphodHeads" # <str>
 Identifier "Card0"
 Driver "radeon"
 BusID "

CI:1:5:0"
EndSection

Section "Screen"
      Identifier "Screen0"
      Device    "Card0"
      Monitor "Monitor0"

      SubSection "Display"
#             Viewport 0 0
            Depth    24
            Modes    "1904x1080_60.00"
      EndSubSection
EndSection

		自动登录	找回密码
密码			注册