设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 发行版讨论区 —— LinuxSir.cn › Archlinux讨论区 › 求助，安装Plymouth后开机没有splash画面
返回列表 发新帖
查看: 549|回复: 8

求助，安装Plymouth后开机没有splash画面

[复制链接]
发表于 2012-2-16 00:11:05 | 显示全部楼层 |阅读模式
我用的是grub legacy而不是grub2，我按照wiki页（https://wiki.archlinux.org/index.php/Plymouth）的做法，在我的/boot/grub/menu.lst文件里面做改动似乎无效，因为那个wiki是写的grub2的情况。我已使用KMS（Kernel Mode Setting)，也重新mkinitcpio -p linux过，但就是没有效果。
有大侠用的是grub legacy同时用了Plymouth弄好了的么？我就是看了Plymouth的介绍，说是这画面可以一直持续到login前，所以才用的Plymouth。
我安装的是aur里面的plymouth-git，plymouth那个也试过（结果更糟都不能正常关机），主板GM965，显示卡intelGMAX3100。
求助，谢谢了！
回复

使用道具 举报

 楼主| 发表于 2012-2-16 09:21:31 | 显示全部楼层
求助啊，大家帮帮忙啊~~~
回复 支持 反对

使用道具 举报

pomhg
发表于 2012-2-16 20:35:40 | 显示全部楼层
我这里没问题。
一个是menu.lst里面kernel参数最后加quiet splash，再就mkinitcpio.conf
  1. HOOKS="base udev autodetect plymouth scsi sata resume filesystems"
复制代码

plymouth-set-default-theme选取主题后mkinitcpio -p linux。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2012-2-16 21:54:04 | 显示全部楼层
Post by pomhg;2160173
我这里没问题。
一个是menu.lst里面kernel参数最后加quiet splash，再就mkinitcpio.conf
  1. HOOKS="base udev autodetect plymouth scsi sata resume filesystems"
复制代码
plymouth-set-default-theme选取主题后mkinitcpio -p linux。

谢谢啊，你说的这些步骤我之前都做了，甚至都换过显示卡的驱动，plymouth的主题也都换过几个，切换到tty时预览是有的
关机和开机比起不用plymouth前好像是有细微的变化，表现为关机时输出的文字少了，开机好像是分辨率提高提前了，但是还都是文字输出（我已经在mkinitcpio.conf里面加了modules=i915什么的开启了KMS，那个plymouth的hooks我也加了，menu.lst也改了，每次换主题也都重新mkinitcpio -p linux了）
请问你用的就是官方源的grub吗？没有使用aur里面那个grub-gfx吗？
回复 支持 反对

使用道具 举报

发表于 2012-2-17 18:46:53 | 显示全部楼层
plymouth 放到autodetect之前udev 之后
在mkinitcpio -p linux试试
回复 支持 反对

使用道具 举报

pomhg
发表于 2012-2-17 19:25:38 | 显示全部楼层
都是官方源里面的，就是plymouth-git是aur的。
你先按照沙漠之子说的试试plymouth放在autodetect之前，udev之后试试，我以前是这样的顺序，也是正常的。

如果不行，你在mkinitcpio.conf里面MODULES里面试试加入agp和显卡驱动模块再mkinitcpio -p linux看看。
我的是intel_agp i915这样的。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2012-2-17 21:48:27 | 显示全部楼层
谢谢啊，楼上几位朋友，我又换了plymouth的位置，加和未加intel_agp都试了一次，还是无效，下面是我的dmesg，莫非RP问题，沮丧了，plymouth-git被我来回装上又卸载不知道折腾多少次了，唉
  1. [lee@arch ~]$ dmesg
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
  5. [    0.000000] Command line: root=/dev/disk/by-uuid/3bff8cf4-8578-4ad5-90d1-f9672dbeb4f6 ro quiet splash
  6. [    0.000000] BIOS-provided physical RAM map:
  7. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  8. [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  9. [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  10. [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f6c0000 (usable)
  11. [    0.000000]  BIOS-e820: 000000003f6c0000 - 000000003f6df000 (ACPI NVS)
  12. [    0.000000]  BIOS-e820: 000000003f6df000 - 0000000040000000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  14. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  15. [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  16. [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  17. [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  18. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  19. [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  20. [    0.000000] NX (Execute Disable) protection: active
  21. [    0.000000] DMI present.
  22. [    0.000000] DMI: Hewlett-Packard Presario V3500 Notebook PC/30CD, BIOS F.2E 12/01/2008
  23. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  24. [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  25. [    0.000000] No AGP bridge found
  26. [    0.000000] last_pfn = 0x3f6c0 max_arch_pfn = 0x400000000
  27. [    0.000000] MTRR default type: uncachable
  28. [    0.000000] MTRR fixed ranges enabled:
  29. [    0.000000]   00000-9FFFF write-back
  30. [    0.000000]   A0000-BFFFF uncachable
  31. [    0.000000]   C0000-CFFFF write-protect
  32. [    0.000000]   D0000-D3FFF uncachable
  33. [    0.000000]   D4000-FFFFF write-protect
  34. [    0.000000] MTRR variable ranges enabled:
  35. [    0.000000]   0 base 000000000 mask FC0000000 write-back
  36. [    0.000000]   1 base 03F700000 mask FFFF00000 uncachable
  37. [    0.000000]   2 base 03F800000 mask FFF800000 uncachable
  38. [    0.000000]   3 disabled
  39. [    0.000000]   4 disabled
  40. [    0.000000]   5 disabled
  41. [    0.000000]   6 disabled
  42. [    0.000000]   7 disabled
  43. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  44. [    0.000000] found SMP MP-table at [ffff8800000f7e50] f7e50
  45. [    0.000000] initial memory mapped : 0 - 20000000
  46. [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
  47. [    0.000000] init_memory_mapping: 0000000000000000-000000003f6c0000
  48. [    0.000000]  0000000000 - 003f600000 page 2M
  49. [    0.000000]  003f600000 - 003f6c0000 page 4k
  50. [    0.000000] kernel direct mapping tables up to 3f6c0000 @ 1fffd000-20000000
  51. [    0.000000] RAMDISK: 37d07000 - 37ff0000
  52. [    0.000000] ACPI: RSDP 00000000000f7e20 00024 (v02 PTLTD )
  53. [    0.000000] ACPI: XSDT 000000003f6cffd4 0007C (v01 HPQOEM SLIC-MPC 06040000  LTP 00000000)
  54. [    0.000000] ACPI: FACP 000000003f6dbc3a 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
  55. [    0.000000] ACPI: DSDT 000000003f6d0f4f 0AC77 (v02 INTEL  CRESTLNE 06040000 MSFT 03000000)
  56. [    0.000000] ACPI: FACS 000000003f6defc0 00040
  57. [    0.000000] ACPI: HPET 000000003f6dbd2e 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
  58. [    0.000000] ACPI: MCFG 000000003f6dbd66 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
  59. [    0.000000] ACPI: TCPA 000000003f6dbda2 00032 (v01 Intel   CRESTLN 06040000      00005A52)
  60. [    0.000000] ACPI: TMOR 000000003f6dbdd4 00026 (v01 PTLTD           06040000 PTL  00000003)
  61. [    0.000000] ACPI: SLIC 000000003f6dbdfa 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ  00000001)
  62. [    0.000000] ACPI: APIC 000000003f6dbf70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
  63. [    0.000000] ACPI: BOOT 000000003f6dbfd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
  64. [    0.000000] ACPI: SSDT 000000003f6d0c72 002DD (v01 SataRe SataAhci 00001000 INTL 20061109)
  65. [    0.000000] ACPI: SSDT 000000003f6d0ad5 0019D (v01 BrtRef  DD01BRT 00001000 INTL 20061109)
  66. [    0.000000] ACPI: SSDT 000000003f6d0050 004E6 (v01  PmRef    CpuPm 00003000 INTL 20061109)
  67. [    0.000000] ACPI: Local APIC address 0xfee00000
  68. [    0.000000] No NUMA configuration found
  69. [    0.000000] Faking a node at 0000000000000000-000000003f6c0000
  70. [    0.000000] Initmem setup node 0 0000000000000000-000000003f6c0000
  71. [    0.000000]   NODE_DATA [000000003f6bb000 - 000000003f6bffff]
  72. [    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003de00000-ffff88003edfffff] on node 0
  73. [    0.000000] Zone PFN ranges:
  74. [    0.000000]   DMA      0x00000010 -> 0x00001000
  75. [    0.000000]   DMA32    0x00001000 -> 0x00100000
  76. [    0.000000]   Normal   empty
  77. [    0.000000] Movable zone start PFN for each node
  78. [    0.000000] early_node_map[2] active PFN ranges
  79. [    0.000000]     0: 0x00000010 -> 0x0000009f
  80. [    0.000000]     0: 0x00000100 -> 0x0003f6c0
  81. [    0.000000] On node 0 totalpages: 259663
  82. [    0.000000]   DMA zone: 64 pages used for memmap
  83. [    0.000000]   DMA zone: 5 pages reserved
  84. [    0.000000]   DMA zone: 3914 pages, LIFO batch:0
  85. [    0.000000]   DMA32 zone: 3995 pages used for memmap
  86. [    0.000000]   DMA32 zone: 251685 pages, LIFO batch:31
  87. [    0.000000] ACPI: PM-Timer IO Port: 0x1008
  88. [    0.000000] ACPI: Local APIC address 0xfee00000
  89. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  90. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  91. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  92. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  93. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  94. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  95. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  96. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  97. [    0.000000] ACPI: IRQ0 used by override.
  98. [    0.000000] ACPI: IRQ2 used by override.
  99. [    0.000000] ACPI: IRQ9 used by override.
  100. [    0.000000] Using ACPI (MADT) for SMP configuration information
  101. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  102. [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  103. [    0.000000] nr_irqs_gsi: 40
  104. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  105. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  106. [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  107. [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
  108. [    0.000000] Booting paravirtualized kernel on bare hardware
  109. [    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
  110. [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f400000 s82176 r8192 d24320 u1048576
  111. [    0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
  112. [    0.000000] pcpu-alloc: [0] 0 1
  113. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 255599
  114. [    0.000000] Policy zone: DMA32
  115. [    0.000000] Kernel command line: root=/dev/disk/by-uuid/3bff8cf4-8578-4ad5-90d1-f9672dbeb4f6 ro quiet splash
  116. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  117. [    0.000000] Checking aperture...
  118. [    0.000000] No AGP bridge found
  119. [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
  120. [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  121. [    0.000000] Memory: 1007872k/1039104k available (4488k kernel code, 452k absent, 30780k reserved, 4409k data, 736k init)
  122. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  123. [    0.000000] Preemptible hierarchical RCU implementation.
  124. [    0.000000]         Verbose stalled-CPUs detection is disabled.
  125. [    0.000000] NR_IRQS:4352 nr_irqs:512 16
  126. [    0.000000] Extended CMOS year: 2000
  127. [    0.000000] Console: colour VGA+ 80x25
  128. [    0.000000] console [tty0] enabled
  129. [    0.000000] allocated 8388608 bytes of page_cgroup
  130. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  131. [    0.000000] hpet clockevent registered
  132. [    0.000000] Fast TSC calibration failed
  133. [    0.000000] TSC: Unable to calibrate against PIT
  134. [    0.000000] TSC: using HPET reference calibration
  135. [    0.000000] Detected 1496.247 MHz processor.
  136. [    0.013337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.18 BogoMIPS (lpj=4987490)
  137. [    0.013345] pid_max: default: 32768 minimum: 301
  138. [    0.013383] Security Framework initialized
  139. [    0.013391] AppArmor: AppArmor disabled by boot time parameter
  140. [    0.013551] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  141. [    0.014237] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  142. [    0.016928] Mount-cache hash table entries: 256
  143. [    0.017132] Initializing cgroup subsys cpuacct
  144. [    0.017141] Initializing cgroup subsys memory
  145. [    0.017153] Initializing cgroup subsys devices
  146. [    0.017156] Initializing cgroup subsys freezer
  147. [    0.017159] Initializing cgroup subsys net_cls
  148. [    0.017162] Initializing cgroup subsys blkio
  149. [    0.017212] CPU: Physical Processor ID: 0
  150. [    0.017215] CPU: Processor Core ID: 0
  151. [    0.017218] mce: CPU supports 6 MCE banks
  152. [    0.017228] CPU0: Thermal monitoring handled by SMI
  153. [    0.017235] using mwait in idle threads.
  154. [    0.019012] ACPI: Core revision 20110623
  155. [    0.026682] ftrace: allocating 17394 entries in 69 pages
  156. [    0.030504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  157. [    0.065304] CPU0: Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
  158. [    0.066663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
  159. [    0.066663] PEBS disabled due to CPU errata.
  160. [    0.066663] ... version:                2
  161. [    0.066663] ... bit width:              40
  162. [    0.066663] ... generic registers:      2
  163. [    0.066663] ... value mask:             000000ffffffffff
  164. [    0.066663] ... max period:             000000007fffffff
  165. [    0.066663] ... fixed-purpose events:   3
  166. [    0.066663] ... event mask:             0000000700000003
  167. [    0.083459] NMI watchdog enabled, takes one hw-pmu counter.
  168. [    0.110012] Booting Node   0, Processors  #1 Ok.
  169. [    0.110017] smpboot cpu 1: start_ip = 9a000
  170. [    0.016665] CPU1: Thermal monitoring handled by SMI
  171. [    0.206694] NMI watchdog enabled, takes one hw-pmu counter.
  172. [    0.213325] Brought up 2 CPUs
  173. [    0.213329] Total of 2 processors activated (5987.37 BogoMIPS).
  174. [    0.214860] devtmpfs: initialized
  175. [    0.217575] PM: Registering ACPI NVS region at 3f6c0000 (126976 bytes)
  176. [    0.217802] print_constraints: dummy:
  177. [    0.217867] NET: Registered protocol family 16
  178. [    0.218038] ACPI: bus type pci registered
  179. [    0.218134] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  180. [    0.218139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  181. [    0.268805] PCI: Using configuration type 1 for base access
  182. [    0.269649] bio: create slab <bio-0> at 0
  183. [    0.269649] ACPI: Added _OSI(Module Device)
  184. [    0.269649] ACPI: Added _OSI(Processor Device)
  185. [    0.269649] ACPI: Added _OSI(3.0 _SCP Extensions)
  186. [    0.269649] ACPI: Added _OSI(Processor Aggregator Device)
  187. [    0.271796] ACPI: EC: Look up EC in DSDT
  188. [    0.275796] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  189. [    0.276698] ACPI: SSDT 000000003f6d0859 001B4 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
  190. [    0.277197] ACPI: Dynamic OEM Table Load:
  191. [    0.277201] ACPI: SSDT           (null) 001B4 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
  192. [    0.277328] ACPI: SSDT 000000003f6d0536 0029E (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
  193. [    0.277806] ACPI: Dynamic OEM Table Load:
  194. [    0.277810] ACPI: SSDT           (null) 0029E (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
  195. [    0.278084] ACPI: SSDT 000000003f6d0a0d 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20061109)
  196. [    0.278573] ACPI: Dynamic OEM Table Load:
  197. [    0.278577] ACPI: SSDT           (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20061109)
  198. [    0.278685] ACPI: SSDT 000000003f6d07d4 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20061109)
  199. [    0.279167] ACPI: Dynamic OEM Table Load:
  200. [    0.279171] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20061109)
  201. [    0.283488] ACPI: Interpreter enabled
  202. [    0.283493] ACPI: (supports S0 S3 S4 S5)
  203. [    0.283519] ACPI: Using IOAPIC for interrupt routing
  204. [    0.296751] ACPI: EC: GPE storm detected, transactions will use polling mode
  205. [    0.398106] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  206. [    0.398330] ACPI: No dock devices found.
  207. [    0.398333] HEST: Table not found.
  208. [    0.398339] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  209. [    0.398938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  210. [    0.399704] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
  211. [    0.399709] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
  212. [    0.399713] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  213. [    0.399717] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
  214. [    0.399721] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
  215. [    0.399724] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
  216. [    0.399727] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
  217. [    0.399732] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xdfffffff]
  218. [    0.399736] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
  219. [    0.399755] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
  220. [    0.399821] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
  221. [    0.399840] pci 0000:00:02.0: reg 10: [mem 0xf4000000-0xf40fffff 64bit]
  222. [    0.399852] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
  223. [    0.399861] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
  224. [    0.399915] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
  225. [    0.399931] pci 0000:00:02.1: reg 10: [mem 0xf4100000-0xf41fffff 64bit]
  226. [    0.400052] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
  227. [    0.400118] pci 0000:00:1a.0: reg 20: [io  0x1840-0x185f]
  228. [    0.400169] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
  229. [    0.400234] pci 0000:00:1a.1: reg 20: [io  0x1860-0x187f]
  230. [    0.400303] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
  231. [    0.400331] pci 0000:00:1a.7: reg 10: [mem 0xf4705c00-0xf4705fff]
  232. [    0.400451] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  233. [    0.400459] pci 0000:00:1a.7: PME# disabled
  234. [    0.400495] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
  235. [    0.400521] pci 0000:00:1b.0: reg 10: [mem 0xf4500000-0xf4503fff 64bit]
  236. [    0.400643] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  237. [    0.400650] pci 0000:00:1b.0: PME# disabled
  238. [    0.400685] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
  239. [    0.400814] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  240. [    0.400820] pci 0000:00:1c.0: PME# disabled
  241. [    0.400858] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
  242. [    0.400986] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  243. [    0.400993] pci 0000:00:1c.1: PME# disabled
  244. [    0.401032] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
  245. [    0.401160] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  246. [    0.401167] pci 0000:00:1c.2: PME# disabled
  247. [    0.401204] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
  248. [    0.401332] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  249. [    0.401339] pci 0000:00:1c.3: PME# disabled
  250. [    0.401377] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
  251. [    0.401441] pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
  252. [    0.401493] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
  253. [    0.401559] pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
  254. [    0.401614] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
  255. [    0.401679] pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
  256. [    0.401744] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
  257. [    0.401772] pci 0000:00:1d.7: reg 10: [mem 0xf4706000-0xf47063ff]
  258. [    0.401892] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  259. [    0.401899] pci 0000:00:1d.7: PME# disabled
  260. [    0.401927] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
  261. [    0.402041] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
  262. [    0.402165] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
  263. [    0.402173] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
  264. [    0.402181] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1200 (mask 0007)
  265. [    0.402246] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
  266. [    0.402266] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
  267. [    0.402280] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
  268. [    0.402294] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
  269. [    0.402309] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
  270. [    0.402324] pci 0000:00:1f.1: reg 20: [io  0x1830-0x183f]
  271. [    0.402387] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
  272. [    0.402419] pci 0000:00:1f.2: reg 10: [io  0x18f8-0x18ff]
  273. [    0.402434] pci 0000:00:1f.2: reg 14: [io  0x18ec-0x18ef]
  274. [    0.402449] pci 0000:00:1f.2: reg 18: [io  0x18f0-0x18f7]
  275. [    0.402463] pci 0000:00:1f.2: reg 1c: [io  0x18e8-0x18eb]
  276. [    0.402477] pci 0000:00:1f.2: reg 20: [io  0x1c00-0x1c1f]
  277. [    0.402492] pci 0000:00:1f.2: reg 24: [mem 0xf4705000-0xf47057ff]
  278. [    0.402569] pci 0000:00:1f.2: PME# supported from D3hot
  279. [    0.402576] pci 0000:00:1f.2: PME# disabled
  280. [    0.402603] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
  281. [    0.402623] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
  282. [    0.402673] pci 0000:00:1f.3: reg 20: [io  0x1c20-0x1c3f]
  283. [    0.402789] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
  284. [    0.402795] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
  285. [    0.402801] pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf3ffffff]
  286. [    0.402812] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
  287. [    0.402917] pci 0000:05:00.0: [11ab:4353] type 0 class 0x000200
  288. [    0.402954] pci 0000:05:00.0: reg 10: [mem 0xf4200000-0xf4203fff 64bit]
  289. [    0.402974] pci 0000:05:00.0: reg 18: [io  0x3000-0x30ff]
  290. [    0.403148] pci 0000:05:00.0: supports D1 D2
  291. [    0.403151] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  292. [    0.403159] pci 0000:05:00.0: PME# disabled
  293. [    0.403180] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  294. [    0.403196] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
  295. [    0.403202] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
  296. [    0.403209] pci 0000:00:1c.1:   bridge window [mem 0xf4200000-0xf42fffff]
  297. [    0.403288] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
  298. [    0.403447] pci 0000:07:00.0: [8086:4222] type 0 class 0x000280
  299. [    0.403506] pci 0000:07:00.0: reg 10: [mem 0xf4300000-0xf4300fff]
  300. [    0.403932] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
  301. [    0.403946] pci 0000:07:00.0: PME# disabled
  302. [    0.404019] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  303. [    0.404061] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
  304. [    0.404071] pci 0000:00:1c.3:   bridge window [mem 0xf4300000-0xf43fffff]
  305. [    0.404149] pci 0000:08:09.0: [1180:0832] type 0 class 0x000c00
  306. [    0.404177] pci 0000:08:09.0: reg 10: [mem 0xf4400000-0xf44007ff]
  307. [    0.404284] pci 0000:08:09.0: supports D1 D2
  308. [    0.404287] pci 0000:08:09.0: PME# supported from D0 D1 D2 D3hot D3cold
  309. [    0.404294] pci 0000:08:09.0: PME# disabled
  310. [    0.404319] pci 0000:08:09.1: [1180:0822] type 0 class 0x000805
  311. [    0.404344] pci 0000:08:09.1: reg 10: [mem 0xf4400800-0xf44008ff]
  312. [    0.404450] pci 0000:08:09.1: supports D1 D2
  313. [    0.404453] pci 0000:08:09.1: PME# supported from D0 D1 D2 D3hot D3cold
  314. [    0.404460] pci 0000:08:09.1: PME# disabled
  315. [    0.404485] pci 0000:08:09.2: [1180:0592] type 0 class 0x000880
  316. [    0.404510] pci 0000:08:09.2: reg 10: [mem 0xf4400c00-0xf4400cff]
  317. [    0.404617] pci 0000:08:09.2: supports D1 D2
  318. [    0.404620] pci 0000:08:09.2: PME# supported from D0 D1 D2 D3hot D3cold
  319. [    0.404627] pci 0000:08:09.2: PME# disabled
  320. [    0.404652] pci 0000:08:09.3: [1180:0852] type 0 class 0x000880
  321. [    0.404676] pci 0000:08:09.3: reg 10: [mem 0xf4401000-0xf44010ff]
  322. [    0.404783] pci 0000:08:09.3: supports D1 D2
  323. [    0.404786] pci 0000:08:09.3: PME# supported from D0 D1 D2 D3hot D3cold
  324. [    0.404793] pci 0000:08:09.3: PME# disabled
  325. [    0.404852] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
  326. [    0.404862] pci 0000:00:1e.0:   bridge window [mem 0xf4400000-0xf44fffff]
  327. [    0.404872] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  328. [    0.404876] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  329. [    0.404880] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  330. [    0.404884] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
  331. [    0.404887] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
  332. [    0.404891] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
  333. [    0.404895] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
  334. [    0.404899] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
  335. [    0.404903] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
  336. [    0.404944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  337. [    0.405154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  338. [    0.405211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  339. [    0.405267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  340. [    0.405320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
  341. [    0.405403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  342. [    0.405783]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  343. [    0.406148]  pci0000:00: ACPI _OSC control (0x1d) granted
  344. [    0.412149] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  345. [    0.412218] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  346. [    0.412284] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  347. [    0.412350] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  348. [    0.412415] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  349. [    0.412478] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  350. [    0.412541] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  351. [    0.412604] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  352. [    0.412736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  353. [    0.412736] vgaarb: loaded
  354. [    0.412736] vgaarb: bridge control possible 0000:00:02.0
  355. [    0.412736] PCI: Using ACPI for IRQ routing
  356. [    0.425630] PCI: pci_cache_line_size set to 64 bytes
  357. [    0.425782] reserve RAM buffer: 000000000009f800 - 000000000009ffff
  358. [    0.425785] reserve RAM buffer: 000000003f6c0000 - 000000003fffffff
  359. [    0.425943] NetLabel: Initializing
  360. [    0.425946] NetLabel:  domain hash size = 128
  361. [    0.425948] NetLabel:  protocols = UNLABELED CIPSOv4
  362. [    0.425969] NetLabel:  unlabeled traffic allowed by default
  363. [    0.425988] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  364. [    0.425995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  365. [    0.426002] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  366. [    0.436780] Switching to clocksource hpet
  367. [    0.447279] pnp: PnP ACPI init
  368. [    0.447308] ACPI: bus type pnp registered
  369. [    0.447760] pnp 00:00: [bus 00-ff]
  370. [    0.447764] pnp 00:00: [io  0x0000-0x0cf7 window]
  371. [    0.447768] pnp 00:00: [io  0x0cf8-0x0cff]
  372. [    0.447771] pnp 00:00: [io  0x0d00-0xffff window]
  373. [    0.447774] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  374. [    0.447777] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
  375. [    0.447781] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
  376. [    0.447784] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
  377. [    0.447787] pnp 00:00: [mem 0x000cc000-0x000cffff window]
  378. [    0.447790] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
  379. [    0.447793] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
  380. [    0.447797] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
  381. [    0.447800] pnp 00:00: [mem 0x000dc000-0x000dffff window]
  382. [    0.447803] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
  383. [    0.447806] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
  384. [    0.447809] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
  385. [    0.447813] pnp 00:00: [mem 0x000ec000-0x000effff window]
  386. [    0.447816] pnp 00:00: [mem 0x000f0000-0x000fffff window]
  387. [    0.447819] pnp 00:00: [mem 0x40000000-0xdfffffff window]
  388. [    0.447822] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
  389. [    0.447826] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
  390. [    0.447931] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  391. [    0.448035] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
  392. [    0.448039] pnp 00:01: [mem 0xfed14000-0xfed17fff]
  393. [    0.448042] pnp 00:01: [mem 0xfed18000-0xfed18fff]
  394. [    0.448045] pnp 00:01: [mem 0xfed19000-0xfed19fff]
  395. [    0.448048] pnp 00:01: [mem 0xe0000000-0xefffffff]
  396. [    0.448050] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
  397. [    0.448053] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
  398. [    0.448152] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
  399. [    0.448157] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
  400. [    0.448161] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
  401. [    0.448165] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
  402. [    0.448169] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
  403. [    0.448173] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
  404. [    0.448177] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
  405. [    0.448182] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  406. [    0.473399] pnp 00:02: [io  0x0060]
  407. [    0.473402] pnp 00:02: [io  0x0064]
  408. [    0.473420] pnp 00:02: [irq 1]
  409. [    0.473496] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
  410. [    0.473515] pnp 00:03: [irq 12]
  411. [    0.473591] pnp 00:03: Plug and Play ACPI device, IDs AUI1501 SYN0300 SYN0002 PNP0f13 (active)
  412. [    0.473605] pnp 00:04: [io  0x0000-0x001f]
  413. [    0.473608] pnp 00:04: [io  0x0081-0x0091]
  414. [    0.473611] pnp 00:04: [io  0x0093-0x009f]
  415. [    0.473614] pnp 00:04: [io  0x00c0-0x00df]
  416. [    0.473617] pnp 00:04: [dma 4]
  417. [    0.473678] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
  418. [    0.473691] pnp 00:05: [mem 0xff000000-0xffffffff]
  419. [    0.473762] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
  420. [    0.473851] pnp 00:06: [mem 0xfed00000-0xfed003ff]
  421. [    0.473949] system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved
  422. [    0.473955] system 00:06: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
  423. [    0.473971] pnp 00:07: [io  0x00f0]
  424. [    0.473979] pnp 00:07: [irq 13]
  425. [    0.474046] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
  426. [    0.474062] pnp 00:08: [io  0x002e-0x002f]
  427. [    0.474065] pnp 00:08: [io  0x004e-0x004f]
  428. [    0.474067] pnp 00:08: [io  0x0061]
  429. [    0.474070] pnp 00:08: [io  0x0063]
  430. [    0.474073] pnp 00:08: [io  0x0065]
  431. [    0.474076] pnp 00:08: [io  0x0067]
  432. [    0.474078] pnp 00:08: [io  0x0070]
  433. [    0.474081] pnp 00:08: [io  0x0080]
  434. [    0.474084] pnp 00:08: [io  0x0092]
  435. [    0.474086] pnp 00:08: [io  0x00b2-0x00b3]
  436. [    0.474089] pnp 00:08: [io  0x0680-0x069f]
  437. [    0.474092] pnp 00:08: [io  0x0800-0x080f]
  438. [    0.474095] pnp 00:08: [io  0x1000-0x107f]
  439. [    0.474097] pnp 00:08: [io  0x1180-0x11bf]
  440. [    0.474100] pnp 00:08: [io  0xfe00]
  441. [    0.474206] system 00:08: [io  0x0680-0x069f] has been reserved
  442. [    0.474211] system 00:08: [io  0x0800-0x080f] has been reserved
  443. [    0.474214] system 00:08: [io  0x1000-0x107f] has been reserved
  444. [    0.474218] system 00:08: [io  0x1180-0x11bf] has been reserved
  445. [    0.474222] system 00:08: [io  0xfe00] has been reserved
  446. [    0.474227] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  447. [    0.474240] pnp 00:09: [io  0x0070-0x0077]
  448. [    0.474248] pnp 00:09: [irq 8]
  449. [    0.474315] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
  450. [    0.474347] pnp: PnP ACPI: found 10 devices
  451. [    0.474349] ACPI: ACPI bus type pnp unregistered
  452. [    0.482761] PCI: max bus depth: 1 pci_try_num: 2
  453. [    0.482835] pci 0000:00:1f.3: BAR 0: assigned [mem 0x40000000-0x400000ff]
  454. [    0.482843] pci 0000:00:1f.3: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff])
  455. [    0.482851] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40100000-0x402fffff 64bit pref]
  456. [    0.482857] pci 0000:00:1c.3: BAR 13: assigned [io  0x4000-0x4fff]
  457. [    0.482863] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40300000-0x404fffff]
  458. [    0.482870] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40500000-0x406fffff 64bit pref]
  459. [    0.482876] pci 0000:00:1c.2: BAR 13: assigned [io  0x5000-0x5fff]
  460. [    0.482882] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40700000-0x408fffff 64bit pref]
  461. [    0.482888] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
  462. [    0.482893] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
  463. [    0.482901] pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf3ffffff]
  464. [    0.482908] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
  465. [    0.482918] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
  466. [    0.482923] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
  467. [    0.482931] pci 0000:00:1c.1:   bridge window [mem 0xf4200000-0xf42fffff]
  468. [    0.482937] pci 0000:00:1c.1:   bridge window [mem 0x40700000-0x408fffff 64bit pref]
  469. [    0.482947] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
  470. [    0.482951] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
  471. [    0.482959] pci 0000:00:1c.2:   bridge window [mem 0x40300000-0x404fffff]
  472. [    0.482965] pci 0000:00:1c.2:   bridge window [mem 0x40500000-0x406fffff 64bit pref]
  473. [    0.482975] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
  474. [    0.482980] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
  475. [    0.482988] pci 0000:00:1c.3:   bridge window [mem 0xf4300000-0xf43fffff]
  476. [    0.482995] pci 0000:00:1c.3:   bridge window [mem 0x40100000-0x402fffff 64bit pref]
  477. [    0.483006] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
  478. [    0.483014] pci 0000:00:1e.0:   bridge window [mem 0xf4400000-0xf44fffff]
  479. [    0.483046] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  480. [    0.483054] pci 0000:00:1c.0: setting latency timer to 64
  481. [    0.483069] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  482. [    0.483076] pci 0000:00:1c.1: setting latency timer to 64
  483. [    0.483093] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  484. [    0.483099] pci 0000:00:1c.2: setting latency timer to 64
  485. [    0.483114] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  486. [    0.483120] pci 0000:00:1c.3: setting latency timer to 64
  487. [    0.483131] pci 0000:00:1e.0: setting latency timer to 64
  488. [    0.483137] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  489. [    0.483140] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  490. [    0.483144] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  491. [    0.483147] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
  492. [    0.483151] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
  493. [    0.483154] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
  494. [    0.483158] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
  495. [    0.483161] pci_bus 0000:00: resource 11 [mem 0x40000000-0xdfffffff]
  496. [    0.483164] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
  497. [    0.483168] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
  498. [    0.483171] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf3ffffff]
  499. [    0.483175] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
  500. [    0.483178] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
  501. [    0.483181] pci_bus 0000:05: resource 1 [mem 0xf4200000-0xf42fffff]
  502. [    0.483185] pci_bus 0000:05: resource 2 [mem 0x40700000-0x408fffff 64bit pref]
  503. [    0.483188] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
  504. [    0.483192] pci_bus 0000:06: resource 1 [mem 0x40300000-0x404fffff]
  505. [    0.483195] pci_bus 0000:06: resource 2 [mem 0x40500000-0x406fffff 64bit pref]
  506. [    0.483199] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
  507. [    0.483202] pci_bus 0000:07: resource 1 [mem 0xf4300000-0xf43fffff]
  508. [    0.483205] pci_bus 0000:07: resource 2 [mem 0x40100000-0x402fffff 64bit pref]
  509. [    0.483209] pci_bus 0000:08: resource 1 [mem 0xf4400000-0xf44fffff]
  510. [    0.483212] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
  511. [    0.483215] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
  512. [    0.483219] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
  513. [    0.483222] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
  514. [    0.483225] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
  515. [    0.483228] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
  516. [    0.483231] pci_bus 0000:08: resource 10 [mem 0x000dc000-0x000dffff]
  517. [    0.483235] pci_bus 0000:08: resource 11 [mem 0x40000000-0xdfffffff]
  518. [    0.483238] pci_bus 0000:08: resource 12 [mem 0xf0000000-0xfebfffff]
  519. [    0.483292] NET: Registered protocol family 2
  520. [    0.483424] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
  521. [    0.484042] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
  522. [    0.485128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  523. [    0.485709] TCP: Hash tables configured (established 131072 bind 65536)
  524. [    0.485713] TCP reno registered
  525. [    0.485724] UDP hash table entries: 512 (order: 2, 16384 bytes)
  526. [    0.485740] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  527. [    0.485891] NET: Registered protocol family 1
  528. [    0.485919] pci 0000:00:02.0: Boot video device
  529. [    0.486133] PCI: CLS 64 bytes, default 64
  530. [    0.486229] Unpacking initramfs...
  531. [    0.547869] Freeing initrd memory: 2980k freed
  532. [    0.549472] Simple Boot Flag at 0x36 set to 0x1
  533. [    0.550122] audit: initializing netlink socket (disabled)
  534. [    0.550141] type=2000 audit(1329486043.549:1): initialized
  535. [    0.554570] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  536. [    0.564665] VFS: Disk quotas dquot_6.5.2
  537. [    0.564758] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  538. [    0.564897] msgmni has been set to 1974
  539. [    0.565157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  540. [    0.565198] io scheduler noop registered
  541. [    0.565201] io scheduler deadline registered
  542. [    0.565255] io scheduler cfq registered (default)
  543. [    0.565442] pcieport 0000:00:1c.0: setting latency timer to 64
  544. [    0.565515] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
  545. [    0.565678] pcieport 0000:00:1c.1: setting latency timer to 64
  546. [    0.565744] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
  547. [    0.565903] pcieport 0000:00:1c.2: setting latency timer to 64
  548. [    0.565968] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
  549. [    0.566128] pcieport 0000:00:1c.3: setting latency timer to 64
  550. [    0.566195] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
  551. [    0.566389] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  552. [    0.566396] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  553. [    0.566424] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  554. [    0.566428] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
  555. [    0.566435] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
  556. [    0.566465] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  557. [    0.566472] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  558. [    0.566498] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  559. [    0.566502] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
  560. [    0.566509] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
  561. [    0.566666] intel_idle: MWAIT substates: 0x22220
  562. [    0.566685] intel_idle: does not run on family 6 model 15
  563. [    0.566736] ERST: Table is not found!
  564. [    0.566738] GHES: HEST is not enabled!
  565. [    0.566832] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  566. [    0.673687] Linux agpgart interface v0.103
  567. [    0.673814] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  568. [    0.674153] i8042: Detected active multiplexing controller, rev 1.1
  569. [    0.674243] serio: i8042 KBD port at 0x60,0x64 irq 1
  570. [    0.674293] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  571. [    0.674336] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  572. [    0.674378] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  573. [    0.674419] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  574. [    0.674580] mousedev: PS/2 mouse device common for all mice
  575. [    0.674682] rtc_cmos 00:09: RTC can wake from S4
  576. [    0.674842] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
  577. [    0.674881] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  578. [    0.674894] cpuidle: using governor ladder
  579. [    0.674896] cpuidle: using governor menu
  580. [    0.675263] TCP cubic registered
  581. [    0.675452] NET: Registered protocol family 10
  582. [    0.676152] NET: Registered protocol family 17
  583. [    0.676158] Registering the dns_resolver key type
  584. [    0.676371] PM: Hibernation image not present or could not be loaded.
  585. [    0.676380] registered taskstats version 1
  586. [    0.680531] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  587. [    0.680953] rtc_cmos 00:09: setting system clock to 2012-02-17 13:40:44 UTC (1329486044)
  588. [    0.681029] Initializing network drop monitor service
  589. [    0.683035] Freeing unused kernel memory: 736k freed
  590. [    0.683266] Write protecting the kernel read-only data: 8192k
  591. [    0.691679] Freeing unused kernel memory: 1636k freed
  592. [    0.695735] Freeing unused kernel memory: 660k freed
  593. [    0.706976] udevd[37]: starting version 181
  594. [    0.717431] [drm] Initialized drm 1.1.0 20060810
  595. [    0.719936] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
  596. [    0.720195] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
  597. [    0.720976] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
  598. [    0.721163] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
  599. [    0.722259] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  600. [    0.733398] ACPI: Lid Switch [LID0]
  601. [    0.733481] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
  602. [    0.733488] ACPI: Sleep Button [SLPB]
  603. [    0.733624] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  604. [    0.733630] ACPI: Power Button [PWRF]
  605. [    0.749774] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  606. [    0.749782] i915 0000:00:02.0: setting latency timer to 64
  607. [    0.825390] i915 0000:00:02.0: irq 44 for MSI/MSI-X
  608. [    0.825399] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  609. [    0.825402] [drm] Driver supports precise vblank timestamp query.
  610. [    0.825456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  611. [    0.878330] fixme: max PWM is zero.
  612. [    1.228302] [drm] initialized overlay support
  613. [    1.374540] fbcon: inteldrmfb (fb0) is primary device
  614. [    1.550021] Refined TSC clocksource calibration: 1496.249 MHz.
  615. [    1.550026] Switching to clocksource tsc
  616. [    1.710476] Console: switching to colour frame buffer device 160x50
  617. [    1.714252] fb0: inteldrmfb frame buffer device
  618. [    1.714254] drm: registered panic notifier
  619. [    1.910107] acpi device:09: registered as cooling_device0
  620. [    1.910330] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
  621. [    1.910340] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  622. [    1.910392] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  623. [    1.965898] usbcore: registered new interface driver usbfs
  624. [    1.965934] usbcore: registered new interface driver hub
  625. [    1.966380] usbcore: registered new device driver usb
  626. [    1.972769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  627. [    1.972811] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  628. [    1.972838] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  629. [    1.972844] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  630. [    1.972888] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  631. [    1.972926] ehci_hcd 0000:00:1a.7: debug port 1
  632. [    1.976825] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
  633. [    1.976855] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4705c00
  634. [    1.988197] SCSI subsystem initialized
  635. [    1.988954] uhci_hcd: USB Universal Host Controller Interface driver
  636. [    1.990033] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  637. [    1.990255] hub 1-0:1.0: USB hub found
  638. [    1.990263] hub 1-0:1.0: 4 ports detected
  639. [    1.990412] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  640. [    1.990441] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  641. [    1.990447] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  642. [    1.990463] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  643. [    1.990502] ehci_hcd 0000:00:1d.7: debug port 1
  644. [    1.994412] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
  645. [    1.994448] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4706000
  646. [    2.004329] libata version 3.00 loaded.
  647. [    2.006699] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  648. [    2.006988] hub 2-0:1.0: USB hub found
  649. [    2.006995] hub 2-0:1.0: 6 ports detected
  650. [    2.007330] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  651. [    2.007342] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  652. [    2.007348] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  653. [    2.007363] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  654. [    2.007417] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
  655. [    2.007687] hub 3-0:1.0: USB hub found
  656. [    2.007694] hub 3-0:1.0: 2 ports detected
  657. [    2.007859] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  658. [    2.007869] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  659. [    2.007874] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  660. [    2.007887] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  661. [    2.007931] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
  662. [    2.008165] hub 4-0:1.0: USB hub found
  663. [    2.008171] hub 4-0:1.0: 2 ports detected
  664. [    2.008318] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  665. [    2.008327] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  666. [    2.008331] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  667. [    2.008343] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
  668. [    2.008378] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
  669. [    2.008592] hub 5-0:1.0: USB hub found
  670. [    2.008598] hub 5-0:1.0: 2 ports detected
  671. [    2.008720] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  672. [    2.008729] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  673. [    2.008734] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  674. [    2.008748] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
  675. [    2.008795] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
  676. [    2.009001] hub 6-0:1.0: USB hub found
  677. [    2.009007] hub 6-0:1.0: 2 ports detected
  678. [    2.009124] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  679. [    2.009135] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  680. [    2.009140] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  681. [    2.009151] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
  682. [    2.009183] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
  683. [    2.009387] hub 7-0:1.0: USB hub found
  684. [    2.009393] hub 7-0:1.0: 2 ports detected
  685. [    2.012936] ata_piix 0000:00:1f.1: version 2.13
  686. [    2.012957] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  687. [    2.013013] ata_piix 0000:00:1f.1: setting latency timer to 64
  688. [    2.013982] scsi0 : ata_piix
  689. [    2.014302] scsi1 : ata_piix
  690. [    2.017536] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
  691. [    2.017541] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
  692. [    2.018275] ahci 0000:00:1f.2: version 3.0
  693. [    2.018305] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  694. [    2.018377] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
  695. [    2.018457] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
  696. [    2.018462] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
  697. [    2.018470] ahci 0000:00:1f.2: setting latency timer to 64
  698. [    2.020281] scsi2 : ahci
  699. [    2.020540] scsi3 : ahci
  700. [    2.021243] scsi4 : ahci
  701. [    2.024650] ata3: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705100 irq 45
  702. [    2.024657] ata4: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705180 irq 45
  703. [    2.024662] ata5: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705200 irq 45
  704. [    2.181645] ata1.00: ATAPI: Optiarc CD-RW CRX880A, KH18, max MWDMA2
  705. [    2.193576] ata1.00: configured for MWDMA2
  706. [    2.194983] scsi 0:0:0:0: CD-ROM            Optiarc  CD-RW CRX880A    KH18 PQ: 0 ANSI: 5
  707. [    2.343361] ata5: SATA link down (SStatus 0 SControl 300)
  708. [    2.343400] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  709. [    2.343430] ata4: SATA link down (SStatus 0 SControl 300)
  710. [    2.345670] ata3.00: unexpected _GTF length (8)
  711. [    2.345677] ata3.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100
  712. [    2.345681] ata3.00: 234441648 sectors, multi 16: LBA48
  713. [    2.347651] ata3.00: unexpected _GTF length (8)
  714. [    2.347657] ata3.00: configured for UDMA/100
  715. [    2.347783] scsi 2:0:0:0: Direct-Access     ATA      ST9120822AS      3.BH PQ: 0 ANSI: 5
  716. [    2.354590] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
  717. [    2.354664] sd 2:0:0:0: [sda] Write Protect is off
  718. [    2.354669] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  719. [    2.354701] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  720. [    2.413101]  sda: sda1 sda2 sda3 sda4
  721. [    2.413651] sd 2:0:0:0: [sda] Attached SCSI disk
  722. [    2.417002] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
  723. [    2.417008] cdrom: Uniform CD-ROM driver Revision: 3.20
  724. [    2.417328] sr 0:0:0:0: Attached scsi CD-ROM sr0
  725. [    2.486684] usb 6-2: new low-speed USB device number 2 using uhci_hcd
  726. [    2.669235] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input5
  727. [    2.669374] generic-usb 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.1-2/input0
  728. [    2.669398] usbcore: registered new interface driver usbhid
  729. [    2.669401] usbhid: USB HID core driver
  730. [    3.074879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  731. [    4.844991] udevd[158]: starting version 181
  732. [    5.394391] input: PC Speaker as /devices/platform/pcspkr/input/input6
  733. [    5.438488] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
  734. [    5.438497] ACPI: resource 0000:00:1f.3 [io  0x1c20-0x1c3f] conflicts with ACPI region SMBI [io 0x1c20-0x1c2f]
  735. [    5.438500] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  736. [    5.448801] iTCO_vendor_support: vendor-support=0
  737. [    5.555520] sky2: driver version 1.30
  738. [    5.555595] sky2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  739. [    5.555614] sky2 0000:05:00.0: setting latency timer to 64
  740. [    5.555656] sky2 0000:05:00.0: Yukon-2 FE chip revision 3
  741. [    5.555775] sky2 0000:05:00.0: irq 46 for MSI/MSI-X
  742. [    5.556484] sky2 0000:05:00.0: eth0: addr 00:16:d3:ab:dc:a8
  743. [    5.612240] r592 0000:08:09.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
  744. [    5.612941] r592: driver successfully loaded
  745. [    5.627270] wmi: Mapper loaded
  746. [    5.723623] Marking TSC unstable due to TSC halts in idle
  747. [    5.723654] ACPI: acpi_idle registered with cpuidle
  748. [    5.723692] Switching to clocksource hpet
  749. [    5.800345] cfg80211: Calling CRDA to update world regulatory domain
  750. [    5.977258] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
  751. [    5.992795] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
  752. [    6.043480] thermal LNXTHERM:00: registered as thermal_zone0
  753. [    6.043485] ACPI: Thermal Zone [TZS0] (55 C)
  754. [    6.626902] thermal LNXTHERM:01: registered as thermal_zone1
  755. [    6.626909] ACPI: Thermal Zone [TZS1] (61 C)
  756. [    6.823810] ACPI: Battery Slot [BAT0] (battery present)
  757. [    6.836043] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
  758. [    6.836206] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
  759. [    6.836646] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  760. [    6.867562] r852 0000:08:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
  761. [    6.867671] r852: driver loaded successfully
  762. [    6.883592] ACPI: AC Adapter [ADP1] (on-line)
  763. [    6.888019] sdhci: Secure Digital Host Controller Interface driver
  764. [    6.888023] sdhci: Copyright(c) Pierre Ossman
  765. [    6.889973] firewire_ohci 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  766. [    6.911511] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  767. [    6.911587] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
  768. [    6.911626] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  769. [    6.950085] firewire_ohci: Added fw-ohci device 0000:08:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
  770. [    6.950832] input: HP WMI hotkeys as /devices/virtual/input/input9
  771. [    6.950870] sdhci-pci 0000:08:09.1: SDHCI controller found [1180:0822] (rev 22)
  772. [    6.950893] sdhci-pci 0000:08:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
  773. [    6.951941] sdhci-pci 0000:08:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
  774. [    6.951960] _regulator_get: 0000:08:09.1 supply vmmc not found, using dummy regulator
  775. [    6.953025] Registered led device: mmc0::
  776. [    6.955157] mmc0: SDHCI controller on PCI [0000:08:09.1] using DMA
  777. [    6.965931] hda_codec: CX20549 (Venice): BIOS auto-probing.
  778. [    6.966798] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
  779. [    6.997553] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
  780. [    6.997558] iwl3945: Copyright(c) 2003-2011 Intel Corporation
  781. [    6.997644] iwl3945 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  782. [    6.997661] iwl3945 0000:07:00.0: setting latency timer to 64
  783. [    7.051787] iwl3945 0000:07:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels
  784. [    7.051792] iwl3945 0000:07:00.0: Detected Intel Wireless WiFi Link 3945ABG
  785. [    7.051950] iwl3945 0000:07:00.0: irq 48 for MSI/MSI-X
  786. [    7.052147] Registered led device: phy0-led
  787. [    7.078325] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
  788. [    7.450288] firewire_core: created device fw0: GUID 07e40a00ea3c5032, S400
  789. [    8.121205] EXT4-fs (sda3): re-mounted. Opts: (null)
  790. [    8.386322] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
  791. [    8.512302] Adding 265068k swap on /dev/sda2.  Priority:-1 extents:1 across:265068k
  792. [   10.241265] sky2 0000:05:00.0: eth0: enabling interface
  793. [   10.241519] ADDRCONF(NETDEV_UP): eth0: link is not ready
  794. [   10.267190] PPP generic driver version 2.4.2
  795. [   11.887984] sky2 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
  796. [   11.888172] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  797. [   15.696792] PPP BSD Compression module registered
  798. [   16.585897] IPv6 over IPv4 tunneling driver
  799. [   16.587699] is0: Disabled Multicast RS
  800. [   22.790045] eth0: no IPv6 routers present
  801. [   34.885426] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
  802. [   34.885432] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
  803. [   34.886102] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
  804. [   34.886106] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
  805. [   36.211914] EXT4-fs (sda3): re-mounted. Opts: commit=0
  806. [   36.910429] EXT4-fs (sda4): re-mounted. Opts: commit=0
复制代码
回复 支持 反对

使用道具 举报

发表于 2012-2-17 22:13:29 | 显示全部楼层
我的mkinitcpio.conf里面MODULES里也是intel_agp i915

在menu.lst里面kernel参数最后再加 i915.modeset=1
回复 支持 反对

使用道具 举报

 楼主| 发表于 2012-2-18 00:12:29 | 显示全部楼层
Post by 沙漠之子;2160227
我的mkinitcpio.conf里面MODULES里也是intel_agp i915

在menu.lst里面kernel参数最后再加 i915.modeset=1


plymouth被我卸了
你的意思是还是KMS的问题吗？我试着在menu.lst的kernel一行加上quiet nomodeset，我看这两次结果是不一样的，这样看的话我的KMS应该是正常的吧？
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表