|
楼主 |
发表于 2003-8-13 20:51:21
|
显示全部楼层
nobody_am兄
你 dhcpd.conf和我的没有什么区别啊。
我现在的dhcpd.conf是这样设置的。请大家在帮我看看。我自己觉得在dhcpd.conf文件的设置中应该没什么问题。但就是不能启用。
dhcpd.conf内容
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
option subnet-mask 255.255.255.0;
# option nis-domain "domain.org";
option domain-name "domain.org";
option domain-name-servers 61.139.2.69;
option broadcast-address 192.168.1.255;
range dynamic-bootp 192.168.1.2 192.168.1.254;
# option time-offset -18000;
default-lease-time 21600;
max-lease-time 43200;
}
subnet 10.0.0.3 netmask 255.255.255.255 { }
dhcpd start后报错内容:
[root@server etc]# dhcpd start
Internet Software Consortium DHCP Server V3.0pl1
Copyright 1995-2001 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 0 leases to leases file.
No subnet declaration for start (0.0.0.0).
** Ignoring requests on start. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface start is attached. **
Not configured to listen on any interfaces!
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
本人E文不好。对于报错的信息不是懂。翻译了一下好象是说dhcp不能着用于eth1。在No subnet declaration for start (0.0.0.0).这一句中说是subnet的问题。还请大家帮我看看还有什么地方不对的。 |
|