|
这猫我以前第一次安装时成功后,但要死机。。。可现在重装linux以后。。。连驱动都成问题了。。。
以下是我用2.4.18-3的内核运行最后一步的出错信息:
[root@localhost essmodem]# insmod esscom
Using /lib/modules/2.4.18-3/esscom.o
/lib/modules/2.4.18-3/esscom.o: unresolved symbol
/lib/modules/2.4.18-3/esscom.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
然后我重新编辑2.4.19的新内核,运行第一步就出错,没生成esscom.o
[root@localhost essmodem]# sh fixscript17 ess.o esscm.o
Fixscript V1.7
doing init_bh_Rf6cf27cc trunc=init_bh new=
doing tty_unregister_driver_R7fb6c97b trunc=tty_unregister_driver new=
doing tty_flip_buffer_push_Rb6365a9c trunc=tty_flip_buffer_push new=
doing pci_read_config_dword_R086be4f9 trunc=pci_read_config_dword new=
doing pci_find_device_R04d7c705 trunc=pci_find_device new=
doing kmalloc_R93d4cfe6 trunc=kmalloc new=
doing __check_region_Rf1d0cdab trunc=__check_region new=
doing add_timer_R88437237 trunc=add_timer new=
doing bh_task_vec_R284177b8 trunc=bh_task_vec new=
doing pcibios_present_R520a75b9 trunc=pcibios_present new=
doing del_timer_R98b02308 trunc=del_timer new=
doing __request_region_R1a1a4f09 trunc=__request_region new=
doing tty_get_baud_rate_R97f3d1fe trunc=tty_get_baud_rate new=
doing tty_register_driver_Rfca76995 trunc=tty_register_driver new=
doing tty_hung_up_p_R41153800 trunc=tty_hung_up_p new=
doing __generic_copy_from_user_R116166aa trunc=__generic_copy_from_user new=
doing sprintf_R3c2c5af5 trunc=sprintf new=
doing ioport_resource_R865ebccd trunc=ioport_resource new=
doing pci_read_config_word_R2482fae9 trunc=pci_read_config_word new=
doing pci_write_config_word_R33a916bf trunc=pci_write_config_word new=
doing jiffies_R0da02d67 trunc=jiffies new=
doing free_irq_Rf20dabd8 trunc=free_irq new=
doing tvec_bases_R8631652b trunc=tvec_bases new=
doing remove_bh_Rbc524a32 trunc=remove_bh new=
doing get_zeroed_page_R6807e076 trunc=get_zeroed_page new=
doing tty_std_termios_R89ac5254 trunc=tty_std_termios new=
doing __tasklet_hi_schedule_R60ea5fe7 trunc=__tasklet_hi_schedule new=
doing kfree_R037a0cba trunc=kfree new=
doing __release_region_Rd49501d4 trunc=__release_region new=
doing __wake_up_R2c77a2af trunc=__wake_up new=
doing printk_R1b7d4074 trunc=printk new=
doing interruptible_sleep_on_R15e26425 trunc=interruptible_sleep_on new=
doing free_pages_R234535e0 trunc=free_pages new=
doing __run_task_queue_R3889b11c trunc=__run_task_queue new=
doing request_irq_R0c60f2e0 trunc=request_irq new=
doing pci_write_config_dword_Rd187b286 trunc=pci_write_config_dword new=
objcopy: --redefine-sym: Symbol "" is target of more than one redefinition
[root@localhost essmodem]# ls
ess.o fixscript17 install Readme.txt
最后我用你发信给我的esscom.o直接安装,这个是你已编译好的2.4.19的驱动,进行直接安装,最后一步时出现了和2.4.18-3一样的错误。。。。
你看看会是什么原因?大家能帮小弟的也尽量帮帮,小弟真的已经尽力了,不会顾意来烦大家的。。。小弟家里只装了linux,这些错误都是挎到软盘带到公司来的 |
|