Conexant USB ADSL驱动安装成功，但有个问题不知道该如何解决

idct

[root@localhost root]# cxstart.sh
>>> Inits Conexant AccessRunner <<<

>>> Loading firmware...
Conexant AccessRunner microcode upload program. 24/6/2003
Josep Comas <jcomas@gna.es>
Pascal Boucher <bcrp17@tiscali.fr>
Pawel Konieczny <konieczp@users.sourceforge.net>

I found ADSL modem with VendorID = 0572 & ProductID = cb00
Loading and sending /usr/sbin/cxfirm4.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
.............
ADSL line is up (Downstream 2048 Kbits/s, Upstream 512 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...
Using /lib/modules/2.4.20-8/kernel/drivers/usb/cxacru.o

/usr/sbin/cxload.sh successful
Setting RFC1483/2684 bridged...
>>> Setting RFC1483/2684 bridged <<<

>>> Loading br2684 kernel module...

>>> Loading br2684ctl...
RFC1483/2684 bridge: Interface "nas0" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.8.81, encapsulation: LLC
RFC1483/2684 bridge: Interface configured

>>> Activating interface...

>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 16/6/2003
Josep Comas <jcomas@gna.es>
Pascal Boucher <bcrp17@tiscali.fr>
Pawel Konieczny <konieczp@users.sourceforge.net>

I found ADSL modem with VendorID = 0572 & ProductID = cb00

>>> Requesting IP address from DHCP server...
Internet Software Consortium DHCP Client V3.0pl1
Copyright 1995-2001 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

/sbin/dhclient-script: configuration for nas0 not found.
Listening on LPF/nas0/00:08:5c:08:2b:c7
Sending on LPF/nas0/00:08:5c:08:2b:c7
Sending on Socket/fallback
DHCPDISCOVER on nas0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on nas0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on nas0 to 255.255.255.255 port 67 interval 21
DHCPDISCOVER on nas0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on nas0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on nas0 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
/sbin/dhclient-script: configuration for nas0 not found.




大伙帮帮忙
看看如何解决这个问题
我装的是REDHAT 9.0

北南南北

/sbin/dhclient-script: configuration for nas0 not found.

先用ifconfig把输出的信息帖上来。

然后再想办法

多谢。

idct

我把IPCONFIG输出的内容贴出来，大家看看先

[root@localhost root]# ifconfig
lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:200 errors:0 dropped:0 overruns:0 frame:0
          TX packets:200 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:13695 (13.3 Kb)  TX bytes:13695 (13.3 Kb)

nas0      Link encap:Ethernet  HWaddr 00:08:5C:08:2B:C7
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:2112 (2.0 Kb)

nbxmedia

出错信息是…………找不到配置文件？？

idct

我该如何去配置呢？
你们有那个配置好的文件吗？

北南南北

最初由 idct 发表
我该如何去配置呢？
你们有那个配置好的文件吗？

[root@beinan root]# locate nas0


再来这样找一找，驱动是安装成功了，可能是设置的问题。

idct

多谢，我试一下看