我的rh8好像中病毒了!!急救!!!!

jevons_lee

一个月没用linux,再次进入时,却无法进入xwindows,!!!后来进入3模式,在文本模式下试图startx来启动,可系统提示缺少fontpath,而且说removing from the list!!!说什么unix:/7000 有问题,??而且更严重的是无法mkdir,而且一旦mount 其他的文件系统,就无法再umount!!说error writer /etc/mtab!!而且说no space left on device,当用df 一看,/dev/hda7 即 / 的利用率竟然达100%!!不知何故!求救!!!
还有由于我的字体选择的是中文,但在文本模式下很多中文显示为乱码,想改变语言为英文,请问是不是这个命令?redhat-config-language,但是系统说无法打开界面,请问还有其他的办法在文本模式下修改语言吗?求救高手解答!!!:confused: :help :help

kj501

linux会那么容易中病毒吗？

Iamthetop

应该不是病毒的原因，现试试重新配置X-windows

xep007

先把/底下的无用的文件删除一些，然后再看看/etc/X11/XF86Config和/etc/fonts/fonts.conf中定义的字体路径中是否有相应的字体文件。

jevons_lee

这是/VAR/LOG/XFREE86.0.LOG下显示的信息,说什么字体路径丢失!

(--) NEOMAGIC(0): 1835008 bytes off-screen memory available
(**) NEOMAGIC(0): Using Software Cursor.
(II) NEOMAGIC(0): Using 256 scanlines of offscreen memory
(**) NEOMAGIC(0): Option "XaaNoScanlineCPUToScreenColorExpandFill"
(**) NEOMAGIC(0): Option "XaaNoScanlineImageWriteRect"
(II) NEOMAGIC(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                16 128x128 slots
(II) NEOMAGIC(0): Acceleration Initialized
(==) NEOMAGIC(0): Backing store disabled
(==) NEOMAGIC(0): Silken mouse enabled
(**) Option "dpms"
(**) NEOMAGIC(0): DPMS enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "rotocol" "S/2"
(**) Mouse0: Protocol: "S/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Option "rotocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "SendCoreEvents"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

(II) NEOMAGIC(0): Not programming shadow registers

jevons_lee

最初由 xep007 发表
先把/底下的无用的文件删除一些，然后再看看/etc/X11/XF86Config和/etc/fonts/fonts.conf中定义的字体路径中是否有相应的字体文件。

# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "dri"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
#        Option        "AutoRepeat"        "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#        Option        "rotocol"        "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
        #Option        "XkbOptions"        ""
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"        #Option        "XkbVariant"        ""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "rotocol" "S/2"
        Option            "Device" "/dev/psaux"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option            "Device" "/dev/input/mice"
        Option            "rotocol" "IMPS/2"
        Option            "Emulate3Buttons" "no"
        Option            "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync    31.5 - 48.5
        VertRefresh  40.0 - 70.0
        Option            "dpms"
EndSection

Section "Device"
#   Option     "Rotate"
#   Option     "pciBurst"
#   Option     "ShadowFB"
#   Option     "NoStretch"
#   Option     "LcdCenter"
        #BusID
        Identifier  "NeoMagic 256 (laptop/notebook)"
        Driver      "neomagic"
        VendorName  "NeoMagic 256 (laptop/notebook)"
        BoardName   "NeoMagic 256 (laptop/notebook)"
        Option            "externDisp"
        Option            "internDisp"#   Option     "noMMIO"
        Option            "SWcursor"#   Option     "NoAccel"
#   Option     "NoLinear"
        Option            "XaaNoScanlineImageWriteRect"
        Option            "XaaNoScanlineCPUToScreenColorExpandFill"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "NeoMagic 256 (laptop/notebook)"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection


上面是/ETC/X11/XF86CONFIG文件所显示的~~

seablue

最初由 jevons_lee 发表
一个月没用linux,再次进入时,却无法进入xwindows,!!!后来进入3模式,在文本模式下试图startx来启动,可系统提示缺少fontpath,而且说removing from the list!!!说什么unix:/7000 有问题,??而且更严重的是无法mkdir,而且一旦mount 其他的文件系统,就无法再umount!!说error writer /etc/mtab!!而且说no space left on device,当用df 一看,/dev/hda7 即 / 的利用率竟然达100%!!不知何故!求救!!!
还有由于我的字体选择的是中文,但在文本模式下很多中文显示为乱码,想改变语言为英文,请问是不是这个命令?redhat-config-language,但是系统说无法打开界面,请问还有其他的办法在文本模式下修改语言吗?求救高手解答!!!:confused: :help :help

是没有启动xfs的原故！

先启动xfs：／etc／rc。d／init。d／xfs start
然后startx

ruochen

说什么unix:/7000 有问题,

我也碰到过，不过我把x配置文件里的7000行注释掉就行了！

ruochen

linux下的病毒我们也该注意咯！

看到共创软件联盟的服务器中了shell病毒，不知道是怎么发现和处理的？

cszlf

是不是日志太多了，
满了吧，你的服务器访问日志不会这么多吧。