|
|
发表于 2004-11-28 11:25:36
|
显示全部楼层
附件不能用，我贴出来吧。。
[PHP]# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /sfroot/home/groups/glc/cvsroot/gentoo/portage/x11-base/xorg-x11/xorg-x11-6.8.1.ebuild,v 1.4 2004/11/17 04:31:02 glc Exp $
# Set TDFX_RISKY to "yes" to get 16-bit, 1024x768 or higher on low-memory
# voodoo3 cards.
# Libraries which are now supplied in shared form that were not in the past
# include: libFS.so, libGLw.so, libI810XvMC.so, libXRes.so, libXfontcache.so,
# libXinerama.so, libXss.so, libXvMC.so, libXxf86rush.so, libfontenc.so,
# libxkbfile.so, libxkbui.so
# TODO
# 18 October 2004 <spyderous@gentoo.org>
# TARGET: 6.8.0-r2
# Add some logic so /usr/X11R6/lib can actually be a symlink
# - Move everything inside to /usr/lib while retaining its MD5 so
# it will still be uninstalled when portage follows the symlink.
# Note: A simple $(mv) does this. Do in pkg_preinst().
# Combine find loops for "Creating fonts.scale files," "Generating
# fonts.dir files and "Generating Xft cache"
# Mr_Bones_ the loop in pkg_postinst for removing Compose can probably
# be one line of bash expansion like rm -f ${ROOT}/usr/$(get_libdir)/
# X11/locale/{ja*|ko*|zh*}/Compose
# TARGET: 6.8.0-r3
# Same for /usr/X11R6/include
# TARGET: 6.8.0-r4
# Same for /usr/X11R6/bin
inherit eutils flag-o-matic toolchain-funcs x11
# Make sure Portage does _NOT_ strip symbols. We will do it later and make sure
# that only we only strip stuff that are safe to strip ...
RESTRICT="nostrip"
# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
IUSE="3dfx 3dnow bitmap-fonts cjk debug dlloader dmx doc dri font-server glx
hardened insecure-drivers ipv6 mmx nls pam sdk sse static truetype-fonts
type1-fonts uclibc xprint xv glc"
# IUSE_INPUT_DEVICES="synaptics wacom"
FILES_VER="0.5"
PATCH_VER="0.2.5"
XCUR_VER="0.3.1"
#MGADRV_VER="1_3_0beta"
#VIADRV_VER="0.1"
XFSFT_ENC_VER="0.1"
GLC_FNT_DIR="/usr/share/fonts/ttf/zh_CN"
S=${WORKDIR}/xc
MY_PV="6.8.0"
HOMEPAGE="http://freedesktop.org/XOrg"
# Misc patches we may need to fetch ..
X_PATCHES="mirror://gentoo/${PN}-${MY_PV}-patches-${PATCH_VER}.tar.bz2
http://dev.gentoo.org/~spyderous/${PN}/patchsets/${MY_PV}/${PN}-${MY_PV}-patches-${PATCH_VER}.tar.bz2
http://dev.gentoo.org/~cyfred/distfiles/${PN}-${MY_PV}-patches-${PATCH_VER}.tar.bz2"
X_DRIVERS=""
# mirror://gentoo/${P}-drivers-via-${VIADRV_VER}.tar.bz2"
# Latest Savage drivers: http://www.probo.com/timr/savage40.html
# Latest SIS drivers: http://www.winischhofer.net/
GENTOO_FILES="mirror://gentoo/${PN}-${MY_PV}-files-${FILES_VER}.tar.bz2
http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${PN}-${MY_PV}-files-${FILES_VER}.tar.bz2
http://dev.gentoo.org/~cyfred/distfiles/${PN}-${MY_PV}-files-${FILES_VER}.tar.bz2"
SRC_URI="mirror://gentoo/eurofonts-X11.tar.bz2
font-server? ( http://dev.gentoo.org/~cyfred/xorg/${PN}/patchsets/${MY_PV}/xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 )
mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2
nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
${GENTOO_FILES}
${X_DRIVERS}
${X_PATCHES}
http://freedesktop.org/~xorg/X11R${PV}/src/X11R${PV}-src1.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src/X11R${PV}-src2.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src/X11R${PV}-src3.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src/X11R${PV}-src4.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src/X11R${PV}-src5.tar.gz
doc? (
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src6.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src7.tar.gz
)"
LICENSE="Adobe-X CID DEC DEC-2 IBM-X NVIDIA-X NetBSD SGI UCB-LBL XC-2
bigelow-holmes-urw-gmbh-luxi christopher-g-demetriou national-semiconductor
nokia tektronix the-open-group todd-c-miller x-truetype xfree86-1.0
MIT SGI-B BSD || ( FTL GPL-2 )"
SLOT="0"
KEYWORDS="~x86"
DEPEND=">=sys-libs/ncurses-5.1
>=sys-libs/zlib-1.1.3-r2
>=sys-devel/flex-2.5.4a-r5
>=dev-libs/expat-1.95.3
>=media-libs/freetype-2.1.4
>=media-libs/fontconfig-2.1-r1
glx? ( >=x11-base/opengl-update-1.7.2 )
>=x11-misc/ttmkfdir-3.0.9-r2
>=sys-apps/sed-4
sys-apps/util-linux
dev-lang/perl
media-libs/libpng
!x11-base/xfree
!virtual/xft
!virtual/x11"
# x11-libs/xft -- blocked because of interference with xorg's
#DEPEND="x11-libs/glcxinput"
RDEPEND="
>=sys-libs/zlib-1.1.3-r2
>=sys-devel/flex-2.5.4a-r5
>=dev-libs/expat-1.95.3
>=media-libs/freetype-2.1.4
>=media-libs/fontconfig-2.1-r1
>=x11-base/opengl-update-1.7.2
media-libs/libpng
>=sys-libs/ncurses-5.1
!x11-base/xfree
!virtual/xft
!virtual/x11"
PDEPEND="x86? (
3dfx? ( >=media-libs/glide-v3-3.10 )
input_devices_synaptics? ( x11-misc/synaptics )
input_devices_wacom? ( x11-misc/linuxwacom )
)
alpha? (
3dfx? ( >=media-libs/glide-v3-3.10 )
)
!uclibc? ( x11-terms/xterm )"
PROVIDE="virtual/x11
virtual/opengl
virtual/glu
virtual/xft"
DESCRIPTION="An X11 implementation maintained by the X.Org Foundation"
HOSTCONF="config/cf/host.def"
cflag_setup() {
# Set up CFLAGS
filter-flags "-funroll-loops"
#Gentoo Linux Chinese Portage Group
#http://gentoo.linuxsir.cn
replace-flags "-march=pentium4" "-march=pentium3"
ALLOWED_FLAGS="-fstack-protector -march -mcpu -O -O1 -O2 -O3 -pipe -fomit-frame-pointer -g -gstabs+ -gstabs -ggdb"
# arch-specific section added by popular demand
case "${ARCH}" in
mips) ALLOWED_FLAGS="${ALLOWED_FLAGS} -mtune -mips1 -mips2 -mips3 -mips4 -mabi"
;;
# -fomit-frame-pointer known to break things and is pointless
# according to ciaranm
# And hardened compiler must be softened. -- fmccor, 20.viii.04
sparc) filter-flags "-fomit-frame-pointer"
if use hardened; then
einfo "Softening gcc for sparc"
ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-pie -fno-PIE"
append-flags "-fno-pie -fno-PIE"
fi
;;
# gcc-3.3.2 causes invalid insn error
hppa ) replace-cpu-flags 2.0 1.0
;;
esac
# Recently there has been a lot of stability problem in Gentoo-land. Many
# things can be the cause to this, but I believe that it is due to gcc3
# still having issues with optimizations, or with it not filtering bad
# combinations (protecting the user maybe from themselves) yet.
#
# This can clearly be seen in large builds like glibc, where too aggressive
# CFLAGS cause the tests to fail miserbly.
#
# Quote from Nick Jones <carpaski@gentoo.org>, who in my opinion
# knows what he is talking about:
#
# People really shouldn't force code-specific options on... It's a
# bad idea. The -march options aren't just to look pretty. They enable
# options that are sensible (and include sse,mmx,3dnow when appropriate).
#
# The next command strips CFLAGS and CXXFLAGS from nearly all flags. If
# you do not like it, comment it, but do not bugreport if you run into
# problems.
#
# <azarah@gentoo.org> (13 Oct 2002)
strip-flags
}
pkg_setup() {
#################################################
### GET RID OF THIS ONCE THIS EBUILD IS READY ###
#################################################
if [ -z "${BREAKME}" ]; then
die "Set the BREAKME variable to emerge this. It's in development. Stop using it."
fi
FILES_DIR="${WORKDIR}/files"
PATCHDIR="${WORKDIR}/patch"
EXCLUDED="${PATCHDIR}/excluded"
# Set up CFLAG-related things
cflag_setup
# See bug #35468, circular pam-X11 dep
if use pam && best_version x11-base/${PN}; then
einfo " revious ${PN} installation detected"
einfo "Enabling PAM features in ${PN}..."
else
einfo "revious ${PN} installation NOT detected"
einfo "Disabling PAM features in ${PN}..."
einfo "You must remerge ${PN} to enable pam."
einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
fi
if use static || use dlloader; then
# A static build disallows building the SDK.
# See config/xf86.rules.
# So does a DllModules YES (use dlloader) build (#50562)
# The latter is pending a potential patch.
if use sdk; then
die "The static and dlloader USE flags are currently incompatible with the sdk USE flag."
fi
fi
if use dmx && use doc; then
die "The dmx and doc USE flags are temporarily incompatible and result in a dead build."
fi
if use dri && ! use glx; then
die "The dri USE flag requires the glx flag."
fi
# on amd64 we need /usr/lib64/X11/locale/lib to be a symlink
# created by the emul lib ebuild in order for adobe acrobat, staroffice,
# and a few other apps to work.
use amd64 && get_libdir_override lib64
# lib32 isnt a supported configuration (yet?)
[ "${CONF_LIBDIR}" == "lib32" ] && get_libdir_override lib
# Echo a message to the user about bitmap-fonts
if ! use bitmap-fonts; then
ewarn "lease emerge this with USE=\"bitmap-fonts\" to enable"
ewarn "75dpi and 100dpi fonts. Your GTK+-1.2 fonts may look"
ewarn "screwy otherwise"
ebeep 5
epause 10
fi
}
host_def_setup() {
HOSTCONF=config/cf/host.def
ebegin "Setting up ${HOSTCONF}"
cd ${S}; cp ${FILES_DIR}/site.def ${HOSTCONF} \
|| die "host.def copy failed"
echo "#define XVendorString \"Gentoo Linux[Chinese Portage Group] (The X.Org Foundation ${PV}, revision ${PR}-${PATCH_VER})\"" \
>> ${HOSTCONF}
# Pending http://bugs.gentoo.org/show_bug.cgi?id=49038 and
# http://freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=600
#
# Makes ld bail at link time on undefined symbols
# Suggested by Mike Harris <mharris@redhat.com>
#echo "#define SharedLibraryLoadFlags -shared -Wl,-z,defs" \
# >> ${HOSTCONF}
# Enable i810 on x86_64 (RH #126687)
echo "#define XF86ExtraCardDrivers i810" >> ${HOSTCONF}
# FHS install locations
echo "#define ManDirectoryRoot /usr/share/man" >> ${HOSTCONF}
echo "#define DocDir /usr/share/doc/${PF}" >> ${HOSTCONF}
echo "#define FontDir /usr/share/fonts" >> ${HOSTCONF}
# Saving this for a later revision
# echo "#define BinDir /usr/X11R6/bin" >> ${HOSTCONF}
# /usr/X11R6/lib with exception of /usr/X11R6/lib/X11
#echo "#define LibDir /usr/X11R6/$(get_libdir)" >> ${HOSTCONF}
# /usr/X11R6/lib/X11
#echo "#define UsrLibDir /usr/X11R6/$(get_libdir)" >> ${HOSTCONF}
# Make man4 and man7 stuff get 'x' suffix like everything else
# Necessary so we can install to /usr/share/man without overwriting
echo "#define DriverManDir \$(MANSOURCEPATH)4" >> ${HOSTCONF}
echo "#define DriverManSuffix 4x /* use just one tab or cpp will die */" \
>> ${HOSTCONF}
echo "#define MiscManDir \$(MANSOURCEPATH)7" >> ${HOSTCONF}
echo "#define MiscManSuffix 7x /* use just one tab or cpp will die */" \
>> ${HOSTCONF}
# Don't build xterm -- use external (#54051)
echo "#define BuildXterm NO" >> ${HOSTCONF}
# Xwrapper has been removed so we now need to use the set uid server
# again, this mustve happened somewhere after 4.3.0 in the development.
echo "#define InstallXserverSetUID YES" >> ${HOSTCONF}
echo "#define BuildServersOnly NO" >> ${HOSTCONF}
# Don't use /lib64 if $(get_libdir) != lib64
# Replaces 0181_all_4.3.0-amd64-nolib64.patch
if [ "$(get_libdir)" == "lib64" ]; then
echo "#define HaveLib64 YES" >> ${HOSTCONF}
else
echo "#define HaveLib64 NO" >> ${HOSTCONF}
fi
# Set location of DRM source to be installed
echo "#define InstSrcDir ${ROOT}/usr/src/${PF}" >> ${HOSTCONF}
# Bug #12775 .. fails with -Os.
replace-flags "-Os" "-O2"
if [ "$(gcc-version)" != "2.95" ]; then
# Should fix bug #4189. gcc 3.x have problems with -march=pentium4
# and -march=athlon-tbird
# Seems fixed on 3.3 and higher
if [ "$(gcc-major-version)" -eq "3" -a "$(gcc-minor-version)" -le "2" ]; then
replace-cpu-flags pentium4 pentium3
replace-cpu-flags athlon athlon-tbird
fi
#to fix #56702 for now, thanks Spanky
[ "$(gcc-version)" == "3.4" ] && use x86 && test_flag -mno-sse2 \
&& append-flags -mno-sse2
# Try a fix for #49310, see #50931 for more info. <spyderous>
if [ "$(is-flag -fomit-frame-pointer)" ]; then
replace-cpu-flags k6 k6-2 k6-3 i586
fi
# Without this, modules breaks with gcc3
if [ "$(gcc-version)" = "3.1" ]; then
append-flags "-fno-merge-constants"
append-flags "-fno-merge-constants"
fi
fi
if ( [ -e "${ROOT}/usr/src/linux" ] \
&& [ ! $(is_kernel "2" "2") ] ) \
|| [ "$(uname -r | cut -d. -f1,2)" != "2.2" ]; then
echo "#define HasLinuxInput YES" >> ${HOSTCONF}
fi
echo "#define CcCmd $(tc-getCC)" >> ${HOSTCONF}
echo "#define OptimizedCDebugFlags ${CFLAGS} GccAliasingArgs" >> ${HOSTCONF}
echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS} GccAliasingArgs" >> ${HOSTCONF}
if use static; then
echo "#define DoLoadableServer NO" >>${HOSTCONF}
else
if use dlloader; then
einfo "Setting DoLoadableServer/MakeDllModules to YES."
echo "#define DoLoadableServer YES" >> ${HOSTCONF}
echo "#define MakeDllModules YES" >> ${HOSTCONF}
if use hardened; then
echo "#define HardenedGccSpecs YES" >> ${HOSTCONF}
fi
fi
fi
use_build debug XFree86Devel
use_build debug BuildDebug
use_build debug DebuggableLibraries
if ! use debug; then
echo "#define ExtraXInputDrivers acecad" >> ${HOSTCONF}
# use less ram .. got this from Spider's makeedit.eclass 
echo "#define GccWarningOptions -Wno-return-type -w" \
>> ${HOSTCONF}
fi
# Remove circular dep between pam and X11, bug #35468
# If pam is in USE and we have X11, then we can enable PAM
# if use pam && [ "$(best_version x11-base/xorg-x11)" ]
if [ "$(best_version x11-base/xorg-x11)" ]; then
# If you want to have optional pam support, do it properly ...
use_build pam HasPam
use_build pam HasPamMisc
fi
if use x86 || use alpha; then
# build with glide3 support? (build the tdfx_dri.o module)
if use 3dfx; then
echo "#define HasGlide3 YES" >> ${HOSTCONF}
fi
# This won't work unless we can disable building the tdfx stuff
# entirely :/
# use_build 3dfx HasGlide3
fi
if use x86; then
# optimize Mesa for architecture
use_build mmx HasMMXSupport
use_build mmx MesaUseMMX
use_build 3dnow Has3DNowSupport
use_build 3dnow MesaUse3DNow
use_build sse HasKatmaiSupport
use_build sse MesaUseKatmai
use_build sse HasSSESupport
use_build sse MesaUseSSE
# Compile the VIA driver
# echo "#define XF86ExtraCardDrivers via" >> ${HOSTCONF}
fi
if use hppa; then
echo "#define DoLoadableServer NO" >> ${HOSTCONF}
echo "#define BuildXF86DRI NO" >> config/cf/host.def
echo "#undef DriDrivers" >> config/cf/host.def
echo "#define XF86CardDrivers fbdev" >> config/cf/host.def
else
# Do we want direct rendering support in drivers?
use_build dri BuildXF86DRI
fi
# Do we want the glx extension? This will turn off XF86DRI if it's off.
# DRI can't build if glx isn't built, so keep this below DRI define.
use_build glx BuildGlxExt
use_build glx BuildGLXLibrary
# Make xv optional for more minimal builds
use_build xv BuildXvLibrary
use_build xv BuildXvExt
# uclibc love from iggy
if use uclibc; then
echo "#define BuildGLULibrary NO" >> config/cf/host.def
fi
if use alpha; then
echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
i740 tdfx cirrus tseng fbdev \
ati vga v4l glint" >> ${HOSTCONF}
fi
if use ppc; then
echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
chips tdfx fbdev ati DevelDrivers vga nv imstt \
XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
fi
if use ppc64; then
echo "#define MakeDllModules YES" >> ${HOSTCONF}
echo "#define XF86VgaHw YES" >> ${HOSTCONF}
echo "#define XF86FBDevHw YES" >> ${HOSTCONF}
echo "#define XF86CardDrivers fbdev v4l ati vga nv" >> ${HOSTCONF}
fi
if use sparc; then
echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
XF86OSCardDrivers XF86ExtraCardDrivers \
DevelDrivers" >> ${HOSTCONF}
if use hardened; then
einfo "Softening the assembler so cfb modules will play nice with sunffb"
echo "#define AsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
echo "#define ModuleAsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
fi
if ( [ -e "${ROOT}/usr/src/linux" ] \
&& !( $(is_kernel "2" "6") ) ) \
|| [ "$(uname -r | cut -d. -f1,2)" != "2.6" ]; then
einfo "Building for kernels less than 2.6 requires special treatment"
echo "#define UseDeprecatedKeyboardDriver YES" >> ${HOSTCONF}
einfo "Avoid bug #46593 for sparc32-SMP with kernel 2.4.xx"
echo "/* Add a line to avoid bug #56593 on sparc32 */" >> \
programs/Xserver/hw/xfree86/drivers/ati/r128_driver.c
fi
fi
# The definitions for fontconfig
echo "#define UseFontconfig YES" >> ${HOSTCONF}
echo "#define HasFontconfig YES" >> ${HOSTCONF}
# Use the xorg Xft2 lib
echo "#define SharedLibXft YES" >> ${HOSTCONF}
# with USE="X doc' circular dep w/ virtual/ghostscript
# echo "#define HasGhostScript ${DOC}" >> ${HOSTCONF}
# Caused issues, basic docs aren't installed
use_build doc BuildLinuxDocText
use_build doc BuildLinuxDocPS
use_build doc BuildSpecsDocs
use_build doc BuildHtmlManPages
use_build doc InstallHardcopyDocs
# enable Japanese docs, optionally
use doc && use_build cjk InstallJapaneseDocs
# Native Language Support Fonts
use_build nls BuildCyrillicFonts
use_build nls BuildArabicFonts
use_build nls BuildGreekFonts
use_build nls BuildHebrewFonts
use_build nls BuildThaiFonts
if use nls; then
use_build cjk BuildCIDFonts
use_build cjk BuildJapaneseFonts
use_build cjk BuildKoreanFonts
use_build cjk BuildChineseFonts
fi
# Crappy bitmap fonts
use_build bitmap-fonts Build75DpiFonts
use_build bitmap-fonts Build100DpiFonts
# Type1 fonts
use_build type1-fonts BuildType1Fonts
# TrueType fonts
use_build truetype-fonts BuildTrueTypeFonts
# X Font Server
use_build font-server BuildFontServer
# Distributed Multiheaded X
use_build dmx BuildDmx
use_build insecure-drivers BuildDevelDRIDrivers
if use ipv6; then
# In case Gentoo ever works on a system with IPv6 sockets that don't
# also listen on IPv4 (see config/cf/X11.tmpl)
echo "#define PreferXdmcpIPv6 YES" >> ${HOSTCONF}
fi
use_build ipv6 BuildIPv6
# Ajax is the man for getting this going for us
echo "#define ProPoliceSupport YES" >> ${HOSTCONF}
# Make xprint optional
use_build xprint BuildXprint
# Build libXp even when xprint is off. It's just for clients, server
if ! use xprint; then
echo "#define BuildXprintLib YES" >> ${HOSTCONF}
fi
# End the host.def definitions here
eend 0
}
patch_setup() {
einfo "Excluding patches..."
#Gentoo Linux Chinese Portage Group
#http://gentoo.linuxsir.cn
# remove 1030_all_XFree86-4.2.99.3-embeddedbitmap-v2.patch
# use Xft-firefly patch instead
patch_exclude 1030
patch_exclude 9925
# These have been applied upstream
patch_exclude 1770 1771 1772 1773
# This patch is just plain broken. Results in random failures.
patch_exclude 0120*parallel-make
# Hardened patches (both broken)
patch_exclude 9960_all_4.3.0-exec-shield-GNU
patch_exclude 9961_all_4.3.0-libGL-exec-shield
# this patch comments out the Xserver line in xdm's config
# We only want it here
if ! use s390; then
patch_exclude 7500
fi
# if ! use gatos; then
# patch_exclude 9841_all_4.3.0-gatos-mesa
# fi
if use debug; then
patch_exclude 5901*acecad-debug
fi
# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]; then
patch_exclude 5850
else
patch_exclude 5851
fi
einfo "Done excluding patches"
}
src_unpack() {
# Unpack source and patches
ebegin "Unpacking source"
# unpack ${PN}-${MY_PV}.tar.bz2
unpack X11R${PV}-src{1,2,3,4,5}.tar.gz
eend 0
if use doc; then
ebegin "Unpacking documentation"
unpack X11R${PV}-src{6,7}.tar.gz
eend 0
fi
ebegin "Unpacking Gentoo files and patches"
unpack ${PN}-${MY_PV}-files-${FILES_VER}.tar.bz2 > /dev/null
unpack ${PN}-${MY_PV}-patches-${PATCH_VER}.tar.bz2 > /dev/null
eend 0
# Unpack TaD's gentoo cursors
ebegin "Unpacking Gentoo cursors"
unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
eend 0
# Unpack extra fonts stuff from Mandrake
ebegin "Unpacking fonts"
if use nls; then
unpack gemini-koi8-u.tar.bz2 > /dev/null
fi
unpack eurofonts-X11.tar.bz2 > /dev/null
if use font-server; then
unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
fi
eend 0
# Remove bum encoding
rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
patch_setup
# Bulk patching - based on patch name
# Will create excluded stuff once it's needed
cd ${WORKDIR}
EPATCH_SUFFIX="patch" \
epatch ${PATCHDIR}
cd ${S}
#Gentoo Linux Chinese Portage
#http://gentoo.linuxsir.cn
if use glc;then
epatch ${FILESDIR}/xorg-x11-6.7.0-gb18030.patch
epatch ${FILESDIR}/xorg-x11-6.8.0-Xft-2.1.2-firefly.patch
cd ${WORKDIR}/files
epatch ${FILESDIR}/xinitrc.patch
cd ${S}
fi
host_def_setup
cd ${S}
if use doc; then
# These are not included anymore as they are obsolete
local x
for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}; do
if [ -f ${x} ]; then
sed -i '/Load[[:space:]]*"\(pex5\|xie\)"/d' ${x}
fi
done
fi
}
src_compile() {
# Set MAKEOPTS to have proper -j? option ..
get_number_of_jobs
# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
# xorg build will silently die. This is tricky to track down, so I'm
# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
# unset. (drobbins, 08 Mar 2003)
unset MAKE_OPTS
einfo "Building xorg-x11..."
if use debug; then
chmod u+x ${S}/config/util/makeg.sh
FAST=1 ${S}/config/util/makeg.sh World WORLDOPTS="" \
|| die "debug make World failed"
else
FAST=1 emake World WORLDOPTS="" || die "make World failed"
fi
if use nls; then
emake -C ${S}/nls || die "nls build failed"
fi
}
pkgconfig_install() {
# This one needs to be in /usr/lib
insinto /usr/$(get_libdir)/pkgconfig
doins ${D}/usr/X11R6/$(get_libdir)/pkgconfig/*.pc
# Now remove the invalid xft.pc, and co ...
rm -rf ${D}/usr/X11R6/$(get_libdir)/pkgconfig
}
backward_compat_setup() {
# Backwards compatibility for /usr/share move
G_FONTDIRS="CID Speedo TTF Type1 encodings local misc util"
if use bitmap-fonts; then
G_FONTDIRS="${G_FONTDIRS} 75dpi 100dpi"
fi
dodir /usr/X11R6/$(get_libdir)/X11/fonts/
for G_FONTDIR in ${G_FONTDIRS}; do
dosym ${ROOT}/usr/share/fonts/${G_FONTDIR} /usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR}
done
dosym ${ROOT}/usr/share/man /usr/X11R6/man
# Have the top-level lib symlink made first, so real dirs don't get created
#dosym ${ROOT}/usr/lib /usr/X11R6/lib
dosym ${ROOT}/usr/share/doc/${PF} /usr/X11R6/$(get_libdir)/X11/doc
# dosym ${ROOT}/usr/share/bin /usr/X11R6/bin
}
compose_files_setup() {
# Hack from Mandrake (update ours that just created Compose files for
# all locales)
#local x
for x in $(find ${D}/usr/X11R6/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
# make empty Compose files for some locales
# CJK must not have that file (otherwise XIM don't works some times)
case $(basename ${x}) in
C|microsoft-*|iso8859-*|koi8-*)
if [ ! -f ${x}/Compose ]; then
touch ${x}/Compose
fi
;;
ja*|ko*|zh*)
if [ -r ${x}/Compose ]; then
rm -f ${x}/Compose
fi
;;
esac
done
# Another hack from Mandrake -- to fix dead + space for the us
# international keyboard
#local i
for i in ${D}/usr/X11R6/$(get_libdir)/X11/locale/*/Compose; do
sed -i \
-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" ${i} \
|| eerror "sed ${i} failed"
done
}
etc_files_install() {
insinto /etc/X11
# Install example config file
newins ${S}/programs/Xserver/hw/xfree86/xorg.conf xorg.conf.example
exeinto /etc/X11
# new session management script
doexe ${FILES_DIR}/chooser.sh
# new display manager script
doexe ${FILES_DIR}/startDM.sh
exeinto /etc/X11/Sessions
# doexe skips directories, so this should be safe
doexe ${FILES_DIR}/Sessions/*
insinto /etc/env.d
doins ${FILES_DIR}/10xorg
insinto /etc/X11/xinit
doins ${FILES_DIR}/xinitrc
exeinto /etc/X11/xdm
doexe ${FILES_DIR}/Xsession ${FILES_DIR}/Xsetup_0
if use font-server; then
insinto /etc/X11/fs
newins ${FILES_DIR}/xfs.config config
fi
if use pam; then
insinto /etc/pam.d
newins ${FILES_DIR}/xdm.pamd xdm
# Need to fix console permissions first
newins ${FILES_DIR}/xserver.pamd xserver
fi
exeinto /etc/init.d
newexe ${FILES_DIR}/xdm.start xdm
if use font-server; then
newexe ${FILES_DIR}/xfs.start xfs
insinto /etc/conf.d
newins ${FILES_DIR}/xfs.conf.d xfs
fi
}
setup_dynamic_libgl() {
# next section is to setup the dynamic libGL stuff
ebegin "Moving libGL and friends for dynamic switching"
dodir /usr/$(get_libdir)/opengl/${PN}/{$(get_libdir),extensions,include}
local x=""
for x in ${D}/usr/X11R6/$(get_libdir)/libGL.so* \
${D}/usr/X11R6/$(get_libdir)/libGL.la \
${D}/usr/X11R6/$(get_libdir)/libGL.a \
${D}/usr/X11R6/$(get_libdir)/libMesaGL.so; do
if [ -f ${x} -o -L ${x} ]; then
# libGL.a cause problems with tuxracer, etc
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/$(get_libdir)
fi
done
for x in ${D}/usr/X11R6/$(get_libdir)/modules/extensions/libglx*; do
if [ -f ${x} -o -L ${x} ]; then
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/extensions
fi
done
# glext.h added for #54984
for x in ${D}/usr/X11R6/include/GL/{gl.h,glx.h,glxtokens.h,glext.h}; do
if [ -f ${x} -o -L ${x} ]; then
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/include
fi
done
# Since we added glext.h and don't have new opengl-update yet, do this
# Avoids circular opengl-update/xorg-x11 dependency
dosym /usr/$(get_libdir)/opengl/${PN}/include/glext.h /usr/X11R6/include/GL/
# Even if libdir isnt lib, we need a lib symlink for opengl-update and
# friends. See bug 62990 for more info.
if [ "$(get_libdir)" != "lib" ]; then
dosym $(get_libdir) /usr/$(get_libdir)/opengl/${PN}/lib
fi
eend 0
}
strip_execs() {
if use debug || has nostrip ${FEATURES}; then
ewarn "Debug build turned on by USE=debug"
ewarn "NOT stripping binaries and libraries"
else
local STRIP
if [ ! -z "${CBUILD}" ] && [ "${CBUILD}" != "${CHOST}" ]; then
STRIP=${CHOST}-strip
else
STRIP=strip
fi
einfo "Stripping binaries and libraries..."
# This bit I got from Redhat ... strip binaries and drivers ..
# NOTE: We do NOT want to strip the drivers, modules or DRI modules!
#local x
for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
grep -v ' shared object,' | \
sed -n -e 's/^\(.*\):[ ]*ELF.*, not stripped/\1/p'); do
if [ -f ${x} ]; then
# Dont do the modules ...
if [ "${x/\/usr\/X11R6\/$(get_libdir)\/modules}" = "${x}" ]; then
echo "$(echo ${x/${D}})"
${STRIP} ${x} || :
fi
fi
done
# Now do the libraries ...
for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/$(get_libdir)}/*.so.* \
${D}/usr/X11R6/{$(get_libdir),$(get_libdir)/X11/locale/$(get_libdir)/common}/*.so.*
do
if [ -f ${x} ]
then
echo "`echo ${x} | sed -e "s|${D}||"`"
strip --strip-debug ${x} || :
fi
done
fi
}
setup_config_files() {
# Fix default config files after installing fonts to /usr/share/fonts
sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts {ROOT}usr/share/fonts:g" \
${D}/etc/X11/xorg.conf.example
sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts{ROOT}usr/share/fonts:g" \
${D}/etc/X11/fs/config
# Work around upgrade problem where people have
# Option "XkbRules" "xfree86" in their config file
sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
}
update_config_files() {
# Fix any installed config files for installing fonts to /usr/share/fonts
# This *needs* to be after all other installation so files aren't
# overwritten.
if [ "${ROOT}" = "/" ]; then
einfo "reparing any installed configuration files for font move..."
FILES="/etc/X11/xorg.conf
/etc/X11/XF86Config-4
/etc/X11/XF86Config
/etc/X11/fs/config"
# /etc/fonts/fonts.conf
# /etc/fonts/local.conf
#local FILE
for FILE in ${FILES}; do
if [ -e ${FILE} ]; then
# New font paths
sed "s,/usr/X11R6/$(get_libdir)/X11/fonts,/usr/share/fonts,g" \
${ROOT}${FILE} > ${IMAGE}${FILE}
if [ "${FILE}" = "/etc/X11/xorg.conf" ] \
|| [ "${FILE}" = "/etc/X11/XF86Config" ] \
|| [ "${FILE}" = "/etc/X11/XF86Config-4" ]; then
# "keyboard" driver is deprecated and will be removed,
# switch to "kbd"
sed -i 's~^\([ \t]*Driver[ \t]\+\)"[kK]eyboard"~\1"kbd"~' \
${IMAGE}${FILE}
# Work around upgrade problem where people have
# Option "XkbRules" "xfree86" in their config file
sed -i "s:^.*Option.*\"XkbRules\".*$::g" \
${IMAGE}${FILE}
fi
fi
done
fi
}
src_install() {
unset MAKE_OPTS
einfo "Installing X.org X11..."
# gcc3 related fix. Do this during install, so that our
# whole build will not be compiled without mmx instructions.
if [ "$(gcc-version)" != "2.95" ] && use x86; then
make install DESTDIR=${D} \
|| make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
install DESTDIR=${D} || die "install failed"
else
make install DESTDIR=${D} || die "install failed"
fi
if use sdk; then
einfo "Installing X.org X11 SDK..."
make install.sdk DESTDIR=${D} || die "sdk install failed"
fi
pkgconfig_install
einfo "Installing man pages..."
make install.man DESTDIR=${D} || die "man page install failed"
einfo "Compressing man pages..."
prepman /usr/X11R6
if use nls; then
cd ${S}/nls
make DESTDIR=${D} install || die "nls install failed"
fi
backward_compat_setup
# Fix permissions on locale/common/*.so
#local x
for x in ${D}/usr/X11R6/$(get_libdir)/X11/locale/$(get_libdir)/common/*.so*; do
if [ -f ${x} ]; then
fperms 0755 ${x/${D}}
fi
done
# Fix permissions on modules ...
for x in $(find ${D}/usr/X11R6/$(get_libdir)/modules -name '*.o') \
$(find ${D}/usr/X11R6/$(get_libdir)/modules -name '*.so')
do
if [ -f ${x} ]; then
fperms 0755 `echo ${x} | sed -e "s|${D}||"`
fi
done
# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
# mess up other things that use xmkmf
ebegin "Fixing $(get_libdir)/X11/config/host.def"
cp ${D}/usr/X11R6/$(get_libdir)/X11/config/host.def ${T}
awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
${T}/host.def > ${D}/usr/X11R6/$(get_libdir)/X11/config/host.def \
|| eerror "Munging host.def failed"
# theoretically, /usr/lib/X11/config is a possible candidate for
# config file management. If we find that people really worry about imake
# stuff, we may add it. But for now, we leave the dir unprotected.
eend 0
# EURO support
ebegin "Euro Support..."
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{D}/usr/$(get_libdir)" \
${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{D}/usr/$(get_libdir)" \
${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{D}/usr/$(get_libdir)" \
${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
eend 0
# Standard symlinks
dodir /usr/{bin,include,$(get_libdir)}
dosym ../X11R6/bin /usr/bin/X11
dosym ../X11R6/include/X11 /usr/include/X11
dosym ../X11R6/include/DPS /usr/include/DPS
dosym ../X11R6/include/GL /usr/include/GL
dosym ../X11R6/$(get_libdir)/X11 /usr/$(get_libdir)/X11
dosym ../../usr/X11R6/$(get_libdir)/X11/xkb /etc/X11/xkb
# Some critical directories
keepdir /var/lib/xdm
dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
# Remove invalid symlinks
rm -f ${D}/usr/$(get_libdir)/libGL.*
# Create required symlinks
dosym libGL.so.1.2 /usr/X11R6/$(get_libdir)/libGL.so
dosym libGL.so.1.2 /usr/X11R6/$(get_libdir)/libGL.so.1
dosym libGL.so.1.2 /usr/X11R6/$(get_libdir)/libMesaGL.so
# We move libGLU to /usr/lib now
dosym libGLU.so.1.3 /usr/$(get_libdir)/libMesaGLU.so
# .la files for libtool support
insinto /usr/X11R6/$(get_libdir)
doins ${FILES_DIR}/lib/*.la
# Backwards compat, FHS, etc.
dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
# Fix perms
fperms 755 /usr/X11R6/$(get_libdir)/X11/xkb/geometry/sgi
fperms 755 /usr/X11R6/bin/dga
compose_files_setup
# Yet more Mandrake
if use font-server; then
ebegin "Encoding files for xfsft font server..."
dodir /usr/share/fonts/encodings
cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
${D}/usr/share/fonts/encodings
for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc; do
[ -f "${x}" ] && gzip -9 -f ${x} \
|| eerror "gzipping ${x} failed"
done
eend 0
fi
if use nls; then
ebegin "gemini-koi8 fonts..."
cd ${WORKDIR}/ukr
gunzip *.Z || eerror "gunzipping gemini-koi8 fonts failed"
gzip -9 *.pcf || eerror "gzipping gemini-koi8 fonts failed"
cd ${S}
cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts \
|| eerror "copying gemini-koi8 fonts failed"
eend 0
fi
etc_files_install
# We move libGLU to /usr/lib now
mv ${D}/usr/X11R6/$(get_libdir)/libGLU.* ${D}/usr/$(get_libdir)
if use glx; then
setup_dynamic_libgl
fi
# Make the core cursor the default. People seem not to like whiteglass
# for some reason.
dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
strip_execs
# Install TaD's gentoo cursors
insinto /usr/share/cursors/${PN}/gentoo/cursors
doins ${WORKDIR}/cursors/gentoo/cursors/*
insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
# Remove xterm app-defaults, since we don't install xterm
# rm ${D}/etc/X11/app-defaults/{UXTerm,XTerm,XTerm-color}
# For Battoussai's gatos stuffs:
if use sdk; then
insinto /usr/X11R6/$(get_libdir)/Server/include
doins ${S}/extras/drm/shared/drm.h
fi
# Remove the /etc/rc.d nonsense -- not everyone is RedHat
rm -rf ${D}/etc/rc.d
setup_config_files
#Gentoo Linux Chinese Portage Group
#http://gentoo.linuxsir.cn
#force X to start with dpi 96
sed -i -e 's,defaultserverargs=\",defaultserverargs=\"-dpi 96 ,g' ${D}/usr/X11R6/bin/startx
insinto /etc/X11
doinst ${FILESDIR}/Xresources
#insinto /usr/X11R6/lib
#doinst ${FILESDIR}/libXft.la
}
pkg_preinst() {
update_config_files
for G_FONTDIR in ${G_FONTDIRS}; do
# Get rid of deprecated directories so our symlinks in the same location
# work -- users shouldn't be placing fonts here so that should be fine,
# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} ]; then
# local directory is for sysadmin-added fonts, so save it
# Note: if we did this in src_install(), we would bring fonts from
# the build machine to the install machine rather than just moving
# fonts on the install machine.
if [ "${G_FONTDIR}" = "local" ]; then
mv ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} \
${ROOT}/usr/share/fonts/
else
rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR}
fi
fi
# clean out old fonts.* and encodings.dir files, as we
# will regenerate them
# Not Speedo or CID, as their fonts.scale files are "real"
if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]
then
find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
-exec rm -f {} \;
find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'encodings.dir' \
-exec rm -f {} \;
fi
done
# No longer used by xorg-x11
if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype ]; then
rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype
fi
if [ -L ${ROOT}/etc/X11/app-defaults ]; then
rm -f ${ROOT}/etc/X11/app-defaults
fi
if [ ! -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/app-defaults ] \
&& [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/app-defaults ]; then
if [ ! -d ${ROOT}/etc/X11/app-defaults ]; then
mkdir -p ${ROOT}/etc/X11/app-defaults
fi
mv -f ${ROOT}/usr/X11R6/$(get_libdir)/X11/app-defaults ${ROOT}/etc/X11
fi
if [ -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/xkb ]; then
rm -f ${ROOT}/usr/X11R6/$(get_libdir)/X11/xkb
fi
if [ ! -L ${ROOT}/etc/X11/xkb ] \
&& [ -d ${ROOT}/etc/X11/xkb ]; then
if [ ! -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/xkb ]; then
mkdir -p ${ROOT}/usr/X11R6/$(get_libdir)/X11
fi
mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/X11R6/$(get_libdir)/X11
fi
# Run this even for USE=-glx, to clean out old stuff from possible
# USE=glx build
if [ -d ${ROOT}/usr/$(get_libdir)/opengl/${PN} ]
then
rm -rf ${ROOT}/usr/$(get_libdir)/opengl/${PN}/*
fi
# make sure we do not have any stale files lying around
# that could break things.
rm -f ${ROOT}/usr/X11R6/$(get_libdir)/libGL*
}
font_setup() {
# These cause ttmkfdir to segfault :/
rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.8x.enc.gz
rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.16.enc.gz
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-1.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-2.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-3.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/suneu-greek.enc
# ********************************************************************
# A note about fonts and needed files:
#
# 1) Create /usr/share/fonts/encodings/encodings.dir
#
# 2) Create fonts.scale for TrueType fonts (need to do this before
# we create fonts.dir files, else fonts.dir files will be
# invalid for TrueType fonts...)
#
# 3) Now Generate fonts.dir files.
#
# CID fonts is a bit more involved, but as we do not install any,
# thus I am not going to bother.
#
# <azarah@gentoo.org> (20 Oct 2002)
#
# ********************************************************************
ebegin "Generating encodings.dir..."
# Create the encodings.dir in /usr/share/fonts/encodings
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{ROOT}/usr/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/mkfontdir -n \
-e ${ROOT}/usr/share/fonts/encodings \
-e ${ROOT}/usr/share/fonts/encodings/large \
-- ${ROOT}/usr/share/fonts/encodings
eend 0
if [ -x ${ROOT}/usr/X11R6/bin/ttmkfdir ]; then
ebegin "Creating fonts.scale files..."
local x
for x in $(find ${ROOT}/usr/share/fonts/* -type d -maxdepth 1); do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
#skip GLC font dir
[ $x = $GLC_FNT_DIR ] && continue
# Only generate .scale files if truetype, opentype or type1
# fonts are present ...
# First truetype (ttf,ttc)
# NOTE: ttmkfdir does NOT work on type1 fonts (#53753)
# Also, there is no way to regenerate Speedo/CID fonts.scale
# <spyderous@gentoo.org> 2 August 2004
if [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.tt[cf]' -print)" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/ttmkfdir -x 2 \
-e ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-o ${x}/fonts.scale -d ${x}
# Next type1 and opentype (pfa,pfb,otf,otc)
elif [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.[po][ft][abcf]' -print)" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/mkfontscale \
-a ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-- ${x}
fi
done
eend 0
else
eerror "ttmkfdir not found. Unable to prepare TrueType fonts for use."
fi
ebegin "Generating fonts.dir files..."
for x in $(find ${ROOT}/usr/share/fonts/* -type d -maxdepth 1); do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
#skip GLC font dir
[ $x = $GLC_FNT_DIR ] && continue
if [ "${x/encodings}" = "${x}" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/mkfontdir \
-e ${ROOT}/usr/share/fonts/encodings \
-e ${ROOT}/usr/share/fonts/encodings/large \
-- ${x}
fi
done
eend 0
ebegin "Generating Xft cache..."
for x in $(find ${ROOT}/usr/share/fonts/* -type d -maxdepth 1); do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
#skip GLC font dir
[ $x = $GLC_FNT_DIR ] && continue
# Only generate XftCache files if there are truetype
# fonts present ...
if [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}{ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/xftcache ${x} &> /dev/null
fi
done
eend 0
ebegin "Fixing permissions..."
find ${ROOT}/usr/share/fonts/ -type f -name 'font.*' \
-exec chmod 0644 {} \;
eend 0
# danarmak found out that fc-cache should be run AFTER all the above
# stuff, as otherwise the cache is invalid, and has to be run again
# as root anyway
if [ -x ${ROOT}/usr/bin/fc-cache ]; then
ebegin "Creating FC font cache..."
HOME="/root" ${ROOT}/usr/bin/fc-cache
eend 0
fi
}
print_info() {
echo
einfo "lease note that the xcursors are in /usr/share/cursors/${PN}"
einfo "Any custom cursor sets should be placed in that directory"
echo
einfo "If you wish to set system-wide default cursors, please set"
einfo "them in /usr/local/share/cursors/${PN} so that future"
einfo "emerges will not overwrite those settings"
echo
einfo "Listening on TCP is disabled by default with startx."
einfo "To enable it, edit /usr/X11R6/bin/startx."
echo
echo
ewarn "BEWARE:"
ewarn "Font installation location has MOVED to:"
ewarn "/usr/share/fonts"
ewarn "Run etc-update to update your config files."
ewarn "Old locations for fonts, docs and man pages"
ewarn "are deprecated."
echo
ewarn "The configuration file has changed from that in XFree86."
ewarn "It is xorg.conf instead of XF86Config."
einfo "You may use xorgcfg, X -configure, or xorgconfig"
einfo "to create xorg.conf."
einfo "If XF86Config exists and xorg.conf does not, it will still"
einfo "read XF86Config."
echo
ewarn "An X Input Mothod autostart script has been integrated to GLC version"
ewarn "Xorg. Now it'll start your XIM server with your desktop enviroment."
ewarn "lease pay attention to your ~/.xinitrc and ~/.Xsessions, you should"
ewarn "not put any XIM related command in both of them and use ~/.xinput.conf"
ewarn "instead.Otherwise it may hang up your X-window in some case!"
# Try to get people to read /usr/share/fonts move
ebeep 5
epause 10
}
pkg_postinst() {
env-update
if [ "${ROOT}" = "/" ]; then
local x=""
umask 022
font_setup
echo
if [ "`${ROOT}/usr/sbin/opengl-update --get-implementation`" = "xfree" ]
then
${ROOT}/usr/sbin/opengl-update ${PN}
else
${ROOT}/usr/sbin/opengl-update --use-old ${PN}
fi
fi
for x in $(find ${ROOT}/usr/X11R6/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
# Remove old compose files we might have created incorrectly
# CJK must not have that file (otherwise XIM don't works some times)
case $(basename ${x}) in
ja*|ko*|zh*)
if [ -r "${x}/Compose" ]; then
rm -f ${x}/Compose
fi
;;
esac
done
# These need to be owned by root and the correct permissions
# (bug #8281)
for x in ${ROOT}/tmp/.{ICE,X11}-unix; do
if [ ! -d ${x} ]; then
mkdir -p ${x}
fi
chown root:root ${x}
chmod 1777 ${x}
done
print_info
}
pkg_postrm() {
# Fix problematic links
if [ -x ${ROOT}/usr/X11R6/bin/Xorg ]; then
ln -snf ../X11R6/bin ${ROOT}/usr/bin/X11
ln -snf ../X11R6/include/X11 ${ROOT}/usr/include/X11
ln -snf ../X11R6/include/DPS ${ROOT}/usr/include/DPS
ln -snf ../X11R6/include/GL ${ROOT}/usr/include/GL
ln -snf ../X11R6/$(get_libdir)/X11 ${ROOT}/usr/$(get_libdir)/X11
fi
}[/PHP] |
|
IP卡
狗仔卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主