vpn问题

shihaoknox

服务器用redhat 9.0安装了pptpd。。也打了补丁。。。客户机win2000拔入。。说远程没有反应。。。我在redhat下有netstat antl看了一下。。。有windows2000拔入的地址。。只是后面是timeout，不是establish这个是怎么回事....请高手指教。。。
1。我在redhat9.0中安装防火墙
2。公司的硬防火墙让我端口1723给打开了。。

还有做什么吗？

shihaoknox

在线等。。。。

shihaoknox

没人知道吗。。

platinum

你提供的信息太少了

shihaoknox

操作系统是redhat 9.0。。。。先安装ppp-2.4.2-b3.i386.rpm。再安装pptpd-1.1.4-b4-i386.rpm
再打补丁kernel-mppe-2.4.20-8.i686.rpm
一切OK。。。启动pptpd
这是我的配置文件pptpd.conf
# (Recommended)
localip 192.168.0.220
remoteip 192.168.0.224-238,192.168.0.245
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.24

这是我的/etc/ppp/options.pptpd

# Authentication

# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd

# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain


# Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use.)


# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
# {{{
#refuse-pap
#refuse-chap
#refuse-mschap
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap-v2
# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
require-mppe-128
# }}}


# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
# {{{
-chap
-chapms
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
#+chapms-v2
# Require MPPE encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
auth
mppe-40 # enable either 40-bit or 128-bit, not both
mppe-128
mppe-stateless
# }}}


# Network and Routing

# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
#ms-dns 10.0.0.1
#ms-dns 10.0.0.2

# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients.  The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4

# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.  This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp


# Logging

# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
#debug

# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump


# Miscellaneous

# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock
# Disable BSD-Compress compression
nobsdcomp

这是我的/etc/ppp/chap-secrets下的配置文件
# client        server          secret                  IP addresses
  用户名       pptpd           password                    192.168.0.224


大家帮我看看有什么不对。。。是不是下载的RPM文件不对。。我好像觉的options.pptpd里面有BSD文件呀。。。如果不对应该下载哪几个文件呀。。。
我用windows2000拔入说远程机子没有反应。。。

shihaoknox

大家帮我看一下哪里错了。。。。谢谢了。。