设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Unix 技术讨论区 —— LinuxSir.cn › BSD 讨论专题 › [求助]有关显示器的配置错误
返回列表 发新帖
查看: 715|回复: 5

[求助]有关显示器的配置错误

[复制链接]
发表于 2005-4-14 11:39:23 | 显示全部楼层 |阅读模式
花了两天工夫，终于装上了心仪已久的FreeBSD,我赶紧装上KDE,装好后用startx命令启动的时候出错了我的显示器是三星793DF,没有问题的)

(EE) VGA (0): Virtual height (0) is too small for the hardware(min 1)
Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found.

我每次都用xf86Config配置了Virtual的：
You must indicate the vertical sync range of your monitor. You can either
select one of the predefined ranges below that correspond to industry-
standard monitor types, or give a specific range. For interlaced modes,
the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).

1  50-70
2  50-90
3  50-100
4  40-150
5  Enter your own vertical sync range

Enter your choice: 2


我把XF86Config和XFree86.0.log这两个文件传上来给大家看看我哪里有问题,谢谢!
回复

使用道具 举报

 楼主| 发表于 2005-4-14 11:42:30 | 显示全部楼层
XFree86.0.log文件如下:

  1. XFree86 Version 4.3.0
  2. Release Date: 27 February 2003
  3. X Protocol Version 11, Revision 0, Release 6.6
  4. Build Operating System: FreeBSD 5.2.1 i386 [ELF]
  5. Build Date: 13 February 2004
  6.         Before reporting problems, check http://www.XFree86.Org/
  7.         to make sure that you have the latest version.
  8. Module Loader present
  9. Markers: (--) probed, (**) from config file, (==) default setting,
  10.          (++) from command line, (!!) notice, (II) informational,
  11.          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  12. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 14 11:08:02 2005
  13. (==) Using config file: "/etc/X11/XF86Config"
  14. (==) ServerLayout "Simple Layout"
  15. (**) |-->Screen "Screen 1" (0)
  16. (**) |   |-->Monitor "Samsung"
  17. (**) |   |-->Device "MyVideoCard"
  18. (**) |-->Input Device "Mouse1"
  19. (**) |-->Input Device "Keyboard1"
  20. (**) Option "AutoRepeat" "500 30"
  21. (**) Option "XkbRules" "xfree86"
  22. (**) XKB: rules: "xfree86"
  23. (**) Option "XkbModel" "pc101"
  24. (**) XKB: model: "pc101"
  25. (**) Option "XkbLayout" "us"
  26. (**) XKB: layout: "us"
  27. (**) Option "XkbVariant" "us"
  28. (**) XKB: variant: "us"
  29. (==) Keyboard: CustomKeycode disabled
  30. (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
  31.         Entry deleted from font path.
  32.         (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
  33. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
  34. (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
  35. (==) ModulePath set to "/usr/X11R6/lib/modules"
  36. (--) Using syscons driver with X support (version 2.0)
  37. (--) using VT number 9

  39. (II) Module ABI versions:
  40.         XFree86 ANSI C Emulation: 0.2
  41.         XFree86 Video Driver: 0.6
  42.         XFree86 XInput driver : 0.4
  43.         XFree86 Server Extension : 0.2
  44.         XFree86 Font Renderer : 0.4
  45. (II) Loader running on freebsd
  46. (II) LoadModule: "bitmap"
  47. (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
  48. (II) Module bitmap: vendor="The XFree86 Project"
  49.         compiled for 4.3.0, module version = 1.0.0
  50.         Module class: XFree86 Font Renderer
  51.         ABI class: XFree86 Font Renderer, version 0.4
  52. (II) Loading font Bitmap
  53. (II) LoadModule: "pcidata"
  54. (II) Loading /usr/X11R6/lib/modules/libpcidata.a
  55. (II) Module pcidata: vendor="The XFree86 Project"
  56.         compiled for 4.3.0, module version = 1.0.0
  57.         ABI class: XFree86 Video Driver, version 0.6
  58. (II) PCI: Probing config type using method 1
  59. (II) PCI: Config type is 1
  60. (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
  61. (II) PCI: PCI scan (all values are in hex)
  62. (II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80
  63. (II) PCI: 00:00:1: chip 10de,01eb card 1462,5700 rev c1 class 05,00,00 hdr 80
  64. (II) PCI: 00:00:2: chip 10de,01ee card 1462,5700 rev c1 class 05,00,00 hdr 80
  65. (II) PCI: 00:00:3: chip 10de,01ed card 1462,5700 rev c1 class 05,00,00 hdr 80
  66. (II) PCI: 00:00:4: chip 10de,01ec card 1462,5700 rev c1 class 05,00,00 hdr 80
  67. (II) PCI: 00:00:5: chip 10de,01ef card 1462,5700 rev c1 class 05,00,00 hdr 80
  68. (II) PCI: 00:01:0: chip 10de,0060 card 1462,5700 rev a4 class 06,01,00 hdr 80
  69. (II) PCI: 00:01:1: chip 10de,0064 card 1462,5700 rev a2 class 0c,05,00 hdr 80
  70. (II) PCI: 00:02:0: chip 10de,0067 card 1462,5700 rev a4 class 0c,03,10 hdr 80
  71. (II) PCI: 00:02:1: chip 10de,0067 card 1462,5700 rev a4 class 0c,03,10 hdr 80
  72. (II) PCI: 00:02:2: chip 10de,0068 card 1462,5700 rev a4 class 0c,03,20 hdr 80
  73. (II) PCI: 00:04:0: chip 10de,0066 card 1462,570c rev a1 class 02,00,00 hdr 00
  74. (II) PCI: 00:06:0: chip 10de,006a card 1462,5700 rev a1 class 04,01,00 hdr 00
  75. (II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
  76. (II) PCI: 00:09:0: chip 10de,0065 card 1462,5700 rev a2 class 01,01,8a hdr 00
  77. (II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
  78. (II) PCI: 02:00:0: chip 1002,4e50 card 0000,4e50 rev 00 class 03,00,00 hdr 00
  79. (II) PCI: End of PCI scan
  80. (II) Host-to-PCI bridge:
  81. (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
  82. (II) Bus 0 I/O range:
  83.         [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[b]
  84. (II) Bus 0 non-prefetchable memory range:
  85.         [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[b]
  86. (II) Bus 0 prefetchable memory range:
  87.         [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[b]
  88. (II) PCI-to-ISA bridge:
  89. (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
  90. (II) PCI-to-PCI bridge:
  91. (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
  92. (II) PCI-to-PCI bridge:
  93. (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
  94. (II) Bus 2 I/O range:
  95.         [0] -1        0        0x0000c000 - 0x0000cfff (0x1000) IX[b]
  96. (II) Bus 2 non-prefetchable memory range:
  97.         [0] -1        0        0xe4000000 - 0xe5ffffff (0x2000000) MX[b]
  98. (II) Bus 2 prefetchable memory range:
  99.         [0] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b]
  100. (--) PCI:*(2:0:0) ATI Technologies Inc unknown chipset (0x4e50) rev 0, Mem @ 0xd0000000/28, 0xe5000000/16, I/O @ 0xc000/8
  101. (II) Addressable bus resource ranges are
  102.         [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[b]
  103.         [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[b]
  104. (II) OS-reported resource ranges:
  105.         [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
  106.         [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
  107.         [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
  108.         [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
  109.         [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
  110.         [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
  111.         [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
  112. (II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
  113. (II) Active PCI resource ranges:
  114.         [0] -1        0        0xe6002000 - 0xe6003fff (0x2000) MX[b]E
  115.         [1] -1        0        0xe6001000 - 0xe6001fff (0x1000) MX[b]E
  116.         [2] -1        0        0xe6000000 - 0xe7ffffff (0x2000000) MX[b]E
  117.         [3] -1        0        0xe6005000 - 0xe6005fff (0x1000) MX[b]E
  118.         [4] -1        0        0xe6004000 - 0xe6007fff (0x4000) MX[b]E
  119.         [5] -1        0        0xe0000000 - 0xdfffffff (0x0) MX[b]EO
  120.         [6] -1        0        0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
  121.         [7] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
  122.         [8] -1        0        0x0000f000 - 0x0000f0ff (0x100) IX[b]E
  123.         [9] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]E
  124.         [10] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[b]E
  125.         [11] -1        0        0x0000d000 - 0x0000d0ff (0x100) IX[b]E
  126.         [12] -1        0        0x0000e400 - 0x0000e4ff (0x100) IX[b]E
  127.         [13] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
  128. (II) PCI Memory resource overlap reduced 0xe6000000 from 0xe7ffffff to 0xe6000fff
  129. (II) PCI Memory resource overlap reduced 0xe6004000 from 0xe6007fff to 0xe6004fff
  130. (II) Active PCI resource ranges after removing overlaps:
  131.         [0] -1        0        0xe6002000 - 0xe6003fff (0x2000) MX[b]E
  132.         [1] -1        0        0xe6001000 - 0xe6001fff (0x1000) MX[b]E
  133.         [2] -1        0        0xe6000000 - 0xe6000fff (0x1000) MX[b]E
  134.         [3] -1        0        0xe6005000 - 0xe6005fff (0x1000) MX[b]E
  135.         [4] -1        0        0xe6004000 - 0xe6004fff (0x1000) MX[b]E
  136.         [5] -1        0        0xe0000000 - 0xdfffffff (0x0) MX[b]EO
  137.         [6] -1        0        0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
  138.         [7] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
  139.         [8] -1        0        0x0000f000 - 0x0000f0ff (0x100) IX[b]E
  140.         [9] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]E
  141.         [10] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[b]E
  142.         [11] -1        0        0x0000d000 - 0x0000d0ff (0x100) IX[b]E
  143.         [12] -1        0        0x0000e400 - 0x0000e4ff (0x100) IX[b]E
  144.         [13] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
  145. (II) OS-reported resource ranges after removing overlaps with PCI:
  146.         [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
  147.         [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
  148.         [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
  149.         [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
  150.         [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
  151.         [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
  152.         [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
  153. (II) All system resource ranges:
  154.         [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
  155.         [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
  156.         [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
  157.         [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
  158.         [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
  159.         [5] -1        0        0xe6002000 - 0xe6003fff (0x2000) MX[b]E
  160.         [6] -1        0        0xe6001000 - 0xe6001fff (0x1000) MX[b]E
  161.         [7] -1        0        0xe6000000 - 0xe6000fff (0x1000) MX[b]E
  162.         [8] -1        0        0xe6005000 - 0xe6005fff (0x1000) MX[b]E
  163.         [9] -1        0        0xe6004000 - 0xe6004fff (0x1000) MX[b]E
  164.         [10] -1        0        0xe0000000 - 0xdfffffff (0x0) MX[b]EO
  165.         [11] -1        0        0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
  166.         [12] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
  167.         [13] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
  168.         [14] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
  169.         [15] -1        0        0x0000f000 - 0x0000f0ff (0x100) IX[b]E
  170.         [16] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]E
  171.         [17] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[b]E
  172.         [18] -1        0        0x0000d000 - 0x0000d0ff (0x100) IX[b]E
  173.         [19] -1        0        0x0000e400 - 0x0000e4ff (0x100) IX[b]E
  174.         [20] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
  175. (II) LoadModule: "dbe"
  176. (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
  177. (II) Module dbe: vendor="The XFree86 Project"
  178.         compiled for 4.3.0, module version = 1.0.0
  179.         Module class: XFree86 Server Extension
  180.         ABI class: XFree86 Server Extension, version 0.2
  181. (II) Loading extension DOUBLE-BUFFER
  182. (II) LoadModule: "extmod"
  183. (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
  184. (II) Module extmod: vendor="The XFree86 Project"
  185.         compiled for 4.3.0, module version = 1.0.0
  186.         Module class: XFree86 Server Extension
  187.         ABI class: XFree86 Server Extension, version 0.2
  188. (II) Loading extension SHAPE
  189. (II) Loading extension MIT-SUNDRY-NONSTANDARD
  190. (II) Loading extension BIG-REQUESTS
  191. (II) Loading extension SYNC
  192. (II) Loading extension MIT-SCREEN-SAVER
  193. (II) Loading extension XC-MISC
  194. (II) Loading extension XFree86-VidModeExtension
  195. (II) Loading extension XFree86-Misc
  196. (II) Loading extension DPMS
  197. (II) Loading extension FontCache
  198. (II) Loading extension TOG-CUP
  199. (II) Loading extension Extended-Visual-Information
  200. (II) Loading extension XVideo
  201. (II) Loading extension XVideo-MotionCompensation
  202. (II) Loading extension X-Resource
  203. (II) LoadModule: "type1"
  204. (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
  205. (II) Module type1: vendor="The XFree86 Project"
  206.         compiled for 4.3.0, module version = 1.0.2
  207.         Module class: XFree86 Font Renderer
  208.         ABI class: XFree86 Font Renderer, version 0.4
  209. (II) Loading font Type1
  210. (II) Loading font CID
  211. (II) LoadModule: "speedo"
  212. (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
  213. (II) Module speedo: vendor="The XFree86 Project"
  214.         compiled for 4.3.0, module version = 1.0.1
  215.         Module class: XFree86 Font Renderer
  216.         ABI class: XFree86 Font Renderer, version 0.4
  217. (II) Loading font Speedo
  218. (II) LoadModule: "vga"
  219. (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
  220. (II) Module vga: vendor="The XFree86 Project"
  221.         compiled for 4.3.0, module version = 4.0.0
  222.         Module class: XFree86 Video Driver
  223.         ABI class: XFree86 Video Driver, version 0.6
  224. (II) LoadModule: "mouse"
  225. (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
  226. (II) Module mouse: vendor="The XFree86 Project"
  227.         compiled for 4.3.0, module version = 1.0.0
  228.         Module class: XFree86 XInput Driver
  229.         ABI class: XFree86 XInput driver, version 0.4
  230. (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
  231. (II) Primary Device is: PCI 02:00:0
  232. (--) Assigning device section with no busID to primary device
  233. (--) Chipset generic found
  234. (II) resource ranges after xf86ClaimFixedResources() call:
  235.         [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
  236.         [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
  237.         [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
  238.         [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
  239.         [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
  240.         [5] -1        0        0xe6002000 - 0xe6003fff (0x2000) MX[b]E
  241.         [6] -1        0        0xe6001000 - 0xe6001fff (0x1000) MX[b]E
  242.         [7] -1        0        0xe6000000 - 0xe6000fff (0x1000) MX[b]E
  243.         [8] -1        0        0xe6005000 - 0xe6005fff (0x1000) MX[b]E
  244.         [9] -1        0        0xe6004000 - 0xe6004fff (0x1000) MX[b]E
  245.         [10] -1        0        0xe0000000 - 0xdfffffff (0x0) MX[b]EO
  246.         [11] -1        0        0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
  247.         [12] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
  248.         [13] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
  249.         [14] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
  250.         [15] -1        0        0x0000f000 - 0x0000f0ff (0x100) IX[b]E
  251.         [16] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]E
  252.         [17] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[b]E
  253.         [18] -1        0        0x0000d000 - 0x0000d0ff (0x100) IX[b]E
  254.         [19] -1        0        0x0000e400 - 0x0000e4ff (0x100) IX[b]E
  255.         [20] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
  256. (II) resource ranges after probing:
  257.         [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[b](B)
  258.         [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
  259.         [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[b]
  260.         [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[b]
  261.         [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[b]
  262.         [5] -1        0        0xe6002000 - 0xe6003fff (0x2000) MX[b]E
  263.         [6] -1        0        0xe6001000 - 0xe6001fff (0x1000) MX[b]E
  264.         [7] -1        0        0xe6000000 - 0xe6000fff (0x1000) MX[b]E
  265.         [8] -1        0        0xe6005000 - 0xe6005fff (0x1000) MX[b]E
  266.         [9] -1        0        0xe6004000 - 0xe6004fff (0x1000) MX[b]E
  267.         [10] -1        0        0xe0000000 - 0xdfffffff (0x0) MX[b]EO
  268.         [11] -1        0        0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
  269.         [12] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
  270.         [13] 0        0        0x000a0000 - 0x000affff (0x10000) MS[b]
  271.         [14] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[b]
  272.         [15] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[b]
  273.         [16] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[b]
  274.         [17] -1        0        0x00000000 - 0x000000ff (0x100) IX[b]
  275.         [18] -1        0        0x0000f000 - 0x0000f0ff (0x100) IX[b]E
  276.         [19] -1        0        0x0000d800 - 0x0000d8ff (0x100) IX[b]E
  277.         [20] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[b]E
  278.         [21] -1        0        0x0000d000 - 0x0000d0ff (0x100) IX[b]E
  279.         [22] -1        0        0x0000e400 - 0x0000e4ff (0x100) IX[b]E
  280.         [23] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
  281.         [24] 0        0        0x000003b0 - 0x000003bb (0xc) IS[b]
  282.         [25] 0        0        0x000003c0 - 0x000003df (0x20) IS[b]
  283. (II) Setting vga for screen 0.
  284. (II) Loading sub module "int10"
  285. (II) LoadModule: "int10"
  286. (II) Loading /usr/X11R6/lib/modules/libint10.a
  287. (II) Module int10: vendor="The XFree86 Project"
  288.         compiled for 4.3.0, module version = 1.0.0
  289.         ABI class: XFree86 Video Driver, version 0.6
  290. (II) VGA(0): initializing int10.
  291. (==) VGA(0): Write-combining range (0xa0000,0x20000) was already clear
  292. (==) VGA(0): Write-combining range (0xc0000,0x40000) was already clear
  293. (II) VGA(0): Primary V_BIOS segment is: 0xc000
  294. (==) VGA(0): Write-combining range (0x0,0x1000) was already clear
  295. (==) VGA(0): Write-combining range (0x0,0x1000) was already clear
  296. (**) VGA(0): Depth 16, (--) framebuffer bpp 16
  297. (==) VGA(0): RGB weight 565
  298. (==) VGA(0): Default visual is TrueColor
  299. (==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
  300. (==) VGA(0): videoRam: 256 kBytes.
  301. (II) Loading sub module "vgahw"
  302. (II) LoadModule: "vgahw"
  303. (II) Loading /usr/X11R6/lib/modules/libvgahw.a
  304. (II) Module vgahw: vendor="The XFree86 Project"
  305.         compiled for 4.3.0, module version = 0.1.0
  306.         ABI class: XFree86 Video Driver, version 0.6
  307. (II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
  308. (--) VGA(0): Pixel clocks available:
  309. (--) VGA(0): pixel clocks:  25.130  28.322  28.410  28.410
  310. (II) VGA(0): Samsung: Using hsync range of 31.50-48.50 kHz
  311. (II) VGA(0): Samsung: Using vrefresh range of 50.00-90.00 Hz
  312. (II) VGA(0): Not using default mode "640x350" (insufficient memory for mode)
  313. (II) VGA(0): Not using default mode "640x400" (insufficient memory for mode)
  314. (II) VGA(0): Not using default mode "720x400" (insufficient memory for mode)
  315. (II) VGA(0): Not using default mode "360x200" (hsync out of range)
  316. (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
  317. (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
  318. (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
  319. (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
  320. (II) VGA(0): Not using default mode "320x240" (hsync out of range)
  321. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  322. (II) VGA(0): Not using default mode "400x300" (hsync out of range)
  323. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  324. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  325. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  326. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  327. (II) VGA(0): Not using default mode "400x300" (hsync out of range)
  328. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  329. (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
  330. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  331. (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
  332. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  333. (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
  334. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  335. (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
  336. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  337. (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
  338. (II) VGA(0): Not using default mode "1152x864" (insufficient memory for mode)
  339. (II) VGA(0): Not using default mode "576x432" (insufficient memory for mode)
  340. (II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
  341. (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
  342. (II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
  343. (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
  344. (II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
  345. (II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
  346. (II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
  347. (II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
  348. (II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
  349. (II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
  350. (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
  351. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  352. (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
  353. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  354. (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
  355. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  356. (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
  357. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  358. (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
  359. (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
  360. (II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
  361. (II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
  362. (II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
  363. (II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
  364. (II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
  365. (II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
  366. (II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
  367. (II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
  368. (II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
  369. (II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
  370. (II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
  371. (II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
  372. (II) VGA(0): Not using default mode "832x624" (insufficient memory for mode)
  373. (II) VGA(0): Not using default mode "416x312" (hsync out of range)
  374. (II) VGA(0): Not using default mode "1152x768" (insufficient memory for mode)
  375. (II) VGA(0): Not using default mode "576x384" (insufficient memory for mode)
  376. (II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
  377. (II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
  378. (II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
  379. (II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
  380. (II) VGA(0): Not using default mode "1600x1024" (insufficient memory for mode)
  381. (II) VGA(0): Not using default mode "800x512" (insufficient memory for mode)
  382. (II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
  383. (II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
  384. (II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
  385. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  386. (II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
  387. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  388. (II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
  389. (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
  390. (II) VGA(0): Not using mode "1280x1024" (no mode of this name)
  391. (II) VGA(0): Not using mode "1024x768" (no mode of this name)
  392. (II) VGA(0): Not using mode "800x600" (no mode of this name)
  393. (II) VGA(0): Not using mode "640x480" (no mode of this name)
  394. (II) VGA(0): Not using default mode "400x300" (width too large for virtual size)
  395. (II) VGA(0): Not using default mode "400x300" (no clock available for mode)
  396. (II) VGA(0): Not using default mode "320x240" (width too large for virtual size)
  397. (II) VGA(0): Not using default mode "320x240" (no clock available for mode)
  398. (II) VGA(0): Not using mode "320x200" (no clock available for mode)
  399. (II) VGA(0): Not using mode "320x175" (no clock available for mode)
  400. (EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
  401. (II) UnloadModule: "vga"
  402. (II) UnloadModule: "vgahw"
  403. (II) Unloading /usr/X11R6/lib/modules/libvgahw.a
  404. (II) UnloadModule: "int10"
  405. (II) Unloading /usr/X11R6/lib/modules/libint10.a
  406. (EE) Screen(s) found, but none have a usable configuration.

  408. Fatal server error:
  409. no screens found

  411. When reporting a problem related to a server crash, please send
  412. the full server output, not just the last messages.
  413. This can be found in the log file "/var/log/XFree86.0.log".
  414. Please report problems to xfree86@xfree86.org.
复制代码
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-4-14 11:45:36 | 显示全部楼层
我的XF86Config文件如下:
  1. # File generated by xf86config.

  3. #
  4. # Copyright (c) 1999 by The XFree86 Project, Inc.
  5. #
  6. # Permission is hereby granted, free of charge, to any person obtaining a
  7. # copy of this software and associated documentation files (the "Software"),
  8. # to deal in the Software without restriction, including without limitation
  9. # the rights to use, copy, modify, merge, publish, distribute, sublicense,
  10. # and/or sell copies of the Software, and to permit persons to whom the
  11. # Software is furnished to do so, subject to the following conditions:
  12. #
  13. # The above copyright notice and this permission notice shall be included in
  14. # all copies or substantial portions of the Software.
  15. #
  16. # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17. # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18. # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19. # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  20. # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
  21. # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  22. # SOFTWARE.
  23. #
  24. # Except as contained in this notice, the name of the XFree86 Project shall
  25. # not be used in advertising or otherwise to promote the sale, use or other
  26. # dealings in this Software without prior written authorization from the
  27. # XFree86 Project.
  28. #

  30. # **********************************************************************
  31. # Refer to the XF86Config(4/5) man page for details about the format of
  32. # this file.
  33. # **********************************************************************

  35. # **********************************************************************
  36. # Module section -- this  section  is used to specify
  37. # which dynamically loadable modules to load.
  38. # **********************************************************************
  39. #
  40. Section "Module"

  42. # This loads the DBE extension module.

  44.     Load        "dbe"          # Double buffer extension

  46. # This loads the miscellaneous extensions module, and disables
  47. # initialisation of the XFree86-DGA extension within that module.
  48.     SubSection  "extmod"
  49.       Option    "omit xfree86-dga"   # don't initialise the DGA extension
  50.     EndSubSection

  52. # This loads the Type1 and FreeType font modules
  53.     Load        "type1"
  54.     Load        "speedo"
  55. #    Load        "freetype"
  56. #    Load        "xtt"

  58. # This loads the GLX module
  59. #    Load       "glx"
  60. # This loads the DRI module
  61. #    Load       "dri"

  63. EndSection

  65. # **********************************************************************
  66. # Files section.  This allows default font and rgb paths to be set
  67. # **********************************************************************

  69. Section "Files"

  71. # The location of the RGB database.  Note, this is the name of the
  72. # file minus the extension (like ".txt" or ".db").  There is normally
  73. # no need to change the default.

  75.     RgbPath        "/usr/X11R6/lib/X11/rgb"

  77. # Multiple FontPath entries are allowed (which are concatenated together),
  78. # as well as specifying multiple comma-separated entries in one FontPath
  79. # command (or a combination of both methods)
  80. #
  81. # If you don't have a floating point coprocessor and emacs, Mosaic or other
  82. # programs take long to start up, try moving the Type1 and Speedo directory
  83. # to the end of this list (or comment them out).
  84. #

  86.     FontPath   "/usr/X11R6/lib/X11/fonts/local/"
  87.     FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
  88.     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
  89.     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
  90.     FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
  91.     FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
  92. #    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
  93. #    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
  94.     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
  95.     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

  97. # The module search path.  The default path is shown here.

  99. #    ModulePath "/usr/X11R6/lib/modules"

  101. EndSection

  103. # **********************************************************************
  104. # Server flags section.
  105. # **********************************************************************

  107. Section "ServerFlags"

  109. # Uncomment this to cause a core dump at the spot where a signal is
  110. # received.  This may leave the console in an unusable state, but may
  111. # provide a better stack trace in the core dump to aid in debugging

  113. #    Option "NoTrapSignals"

  115. # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
  116. # (where n is 1 through 12).  This allows clients to receive these key
  117. # events.

  119. #    Option "DontVTSwitch"

  121. # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
  122. # This allows clients to receive this key event.

  124. #    Option "DontZap"

  126. # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
  127. # sequences.  This allows clients to receive these key events.

  129. #    Option "Dont Zoom"

  131. # Uncomment this to disable tuning with the xvidtune client. With
  132. # it the client can still run and fetch card and monitor attributes,
  133. # but it will not be allowed to change them. If it tries it will
  134. # receive a protocol error.

  136. #    Option "DisableVidModeExtension"

  138. # Uncomment this to enable the use of a non-local xvidtune client.

  140. #    Option "AllowNonLocalXvidtune"

  142. # Uncomment this to disable dynamically modifying the input device
  143. # (mouse and keyboard) settings.

  145. #    Option "DisableModInDev"

  147. # Uncomment this to enable the use of a non-local client to
  148. # change the keyboard or mouse settings (currently only xset).

  150. #    Option "AllowNonLocalModInDev"

  152. EndSection

  154. # **********************************************************************
  155. # Input devices
  156. # **********************************************************************

  158. # **********************************************************************
  159. # Core keyboard's InputDevice section
  160. # **********************************************************************

  162. Section "InputDevice"

  164.     Identifier        "Keyboard1"
  165.     Driver        "Keyboard"

  167. # For most OSs the protocol can be omitted (it defaults to "Standard").
  168. # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
  169. # uncomment the following line.

  171. #    Option     "Protocol"      "Xqueue"

  173.     Option "AutoRepeat" "500 30"

  175. # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
  176. #    Option        "Xleds"      "1 2 3"

  178. #    Option "LeftAlt"     "Meta"
  179. #    Option "RightAlt"    "ModeShift"

  181. # To customise the XKB settings to suit your keyboard, modify the
  182. # lines below (which are the defaults).  For example, for a non-U.S.
  183. # keyboard, you will probably want to use:
  184. #    Option "XkbModel"    "pc102"
  185. # If you have a US Microsoft Natural keyboard, you can use:
  186. #    Option "XkbModel"    "microsoft"
  187. #
  188. # Then to change the language, change the Layout setting.
  189. # For example, a german layout can be obtained with:
  190. #    Option "XkbLayout"   "de"
  191. # or:
  192. #    Option "XkbLayout"   "de"
  193. #    Option "XkbVariant"  "nodeadkeys"
  194. #
  195. # If you'd like to switch the positions of your capslock and
  196. # control keys, use:
  197. #    Option "XkbOptions"  "ctrl:swapcaps"

  199. # These are the default XKB settings for XFree86
  200. #    Option "XkbRules"    "xfree86"
  201. #    Option "XkbModel"    "pc101"
  202. #    Option "XkbLayout"   "us"
  203. #    Option "XkbVariant"  ""
  204. #    Option "XkbOptions"  ""

  206. #    Option "XkbDisable"

  208.     Option "XkbRules"        "xfree86"
  209.     Option "XkbModel"        "pc101"
  210.     Option "XkbLayout"        "us"
  211.     Option "XkbVariant"        "us"

  213. EndSection


  216. # **********************************************************************
  217. # Core Pointer's InputDevice section
  218. # **********************************************************************

  220. Section "InputDevice"

  222. # Identifier and driver

  224.     Identifier        "Mouse1"
  225.     Driver        "mouse"
  226.     Option "Protocol"    "Auto"
  227.     Option "Device"      "/dev/sysmouse"

  229. # Mouse-speed setting for PS/2 mouse.

  231. #    Option "Resolution"        "256"

  233. # When using XQUEUE, comment out the above two lines, and uncomment
  234. # the following line.

  236. #    Option "Protocol"        "Xqueue"

  238. # Baudrate and SampleRate are only for some Logitech mice. In
  239. # almost every case these lines should be omitted.

  241. #    Option "BaudRate"        "9600"
  242. #    Option "SampleRate"        "150"

  244. # Emulate3Buttons is an option for 2-button Microsoft mice
  245. # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

  247.     Option "Emulate3Buttons"
  248. #    Option "Emulate3Timeout"    "50"

  250. # ChordMiddle is an option for some 3-button Logitech mice

  252. #    Option "ChordMiddle"

  254. EndSection


  257. # **********************************************************************
  258. # Other input device sections
  259. # this is optional and is required only if you
  260. # are using extended input devices.  This is for example only.  Refer
  261. # to the XF86Config man page for a description of the options.
  262. # **********************************************************************
  263. #
  264. # Section "InputDevice"
  265. #    Identifier  "Mouse2"
  266. #    Driver      "mouse"
  267. #    Option      "Protocol"      "MouseMan"
  268. #    Option      "Device"        "/dev/mouse2"
  269. # EndSection
  270. #
  271. # Section "InputDevice"
  272. #    Identifier "spaceball"
  273. #    Driver     "magellan"
  274. #    Option     "Device"        "/dev/cua0"
  275. # EndSection
  276. #
  277. # Section "InputDevice"
  278. #    Identifier "spaceball2"
  279. #    Driver     "spaceorb"
  280. #    Option     "Device"        "/dev/cua0"
  281. # EndSection
  282. #
  283. # Section "InputDevice"
  284. #    Identifier "touchscreen0"
  285. #    Driver     "microtouch"
  286. #    Option     "Device"        "/dev/ttyS0"
  287. #    Option     "MinX"          "1412"
  288. #    Option     "MaxX"          "15184"
  289. #    Option     "MinY"          "15372"
  290. #    Option     "MaxY"          "1230"
  291. #    Option     "ScreenNumber"  "0"
  292. #    Option     "ReportingMode" "Scaled"
  293. #    Option     "ButtonNumber"  "1"
  294. #    Option     "SendCoreEvents"
  295. # EndSection
  296. #
  297. # Section "InputDevice"
  298. #    Identifier "touchscreen1"
  299. #    Driver     "elo2300"
  300. #    Option     "Device"        "/dev/ttyS0"
  301. #    Option     "MinX"          "231"
  302. #    Option     "MaxX"          "3868"
  303. #    Option     "MinY"          "3858"
  304. #    Option     "MaxY"          "272"
  305. #    Option     "ScreenNumber"  "0"
  306. #    Option     "ReportingMode" "Scaled"
  307. #    Option     "ButtonThreshold"       "17"
  308. #    Option     "ButtonNumber"  "1"
  309. #    Option     "SendCoreEvents"
  310. # EndSection

  312. # **********************************************************************
  313. # Monitor section
  314. # **********************************************************************

  316. # Any number of monitor sections may be present

  318. Section "Monitor"

  320.     Identifier  "Samsung"

  322. # HorizSync is in kHz unless units are specified.
  323. # HorizSync may be a comma separated list of discrete values, or a
  324. # comma separated list of ranges of values.
  325. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
  326. # USER MANUAL FOR THE CORRECT NUMBERS.

  328.     HorizSync   31.5 - 48.5

  330. #    HorizSync        30-64         # multisync
  331. #    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
  332. #    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

  334. # VertRefresh is in Hz unless units are specified.
  335. # VertRefresh may be a comma separated list of discrete values, or a
  336. # comma separated list of ranges of values.
  337. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
  338. # USER MANUAL FOR THE CORRECT NUMBERS.

  340.     VertRefresh 50-90

  342. EndSection


  345. # **********************************************************************
  346. # Graphics device section
  347. # **********************************************************************

  349. # Any number of graphics device sections may be present

  351. # Standard VGA Device:

  353. Section "Device"
  354.     Identifier        "Standard VGA"
  355.     VendorName        "Unknown"
  356.     BoardName        "Unknown"

  358. # The chipset line is optional in most cases.  It can be used to override
  359. # the driver's chipset detection, and should not normally be specified.

  361. #    Chipset        "generic"

  363. # The Driver line must be present.  When using run-time loadable driver
  364. # modules, this line instructs the server to load the specified driver
  365. # module.  Even when not using loadable driver modules, this line
  366. # indicates which driver should interpret the information in this section.

  368.     Driver     "vga"
  369. # The BusID line is used to specify which of possibly multiple devices
  370. # this section is intended for.  When this line isn't present, a device
  371. # section can only match up with the primary video device.  For PCI
  372. # devices a line like the following could be used.  This line should not
  373. # normally be included unless there is more than one video device
  374. # intalled.

  376. #    BusID      "PCI:0:10:0"

  378. #    VideoRam        256

  380. #    Clocks        25.2 28.3

  382. EndSection

  384. # Device configured by xf86config:

  386. Section "Device"
  387.     Identifier  "MyVideoCard"
  388.     Driver      "vga"
  389.         # unsupported card
  390.     #VideoRam    65536
  391.     # Insert Clocks lines here if appropriate
  392. EndSection


  395. # **********************************************************************
  396. # Screen sections
  397. # **********************************************************************

  399. # Any number of screen sections may be present.  Each describes
  400. # the configuration of a single screen.  A single specific screen section
  401. # may be specified from the X server command line with the "-screen"
  402. # option.
  403. Section "Screen"
  404.     Identifier  "Screen 1"
  405.     Device      "MyVideoCard"
  406.     Monitor     "Samsung"
  407.     DefaultDepth 16

  409.     Subsection "Display"
  410.         Depth       8
  411.         Modes       "1280x1024" "1024x768" "800x600" "640x480"
  412.         ViewPort    0 0
  413.     EndSubsection
  414.     Subsection "Display"
  415.         Depth       16
  416.         Modes       "1280x1024" "1024x768" "800x600" "640x480"
  417.         ViewPort    0 0
  418.     EndSubsection
  419.     Subsection "Display"
  420.         Depth       24
  421.         Modes       "1280x1024" "1024x768" "800x600" "640x480"
  422.         ViewPort    0 0
  423.     EndSubsection
  424. EndSection

  426. # **********************************************************************
  427. # ServerLayout sections.
  428. # **********************************************************************

  430. # Any number of ServerLayout sections may be present.  Each describes
  431. # the way multiple screens are organised.  A specific ServerLayout
  432. # section may be specified from the X server command line with the
  433. # "-layout" option.  In the absence of this, the first section is used.
  434. # When now ServerLayout section is present, the first Screen section
  435. # is used alone.

  437. Section "ServerLayout"

  439. # The Identifier line must be present
  440.     Identifier  "Simple Layout"

  442. # Each Screen line specifies a Screen section name, and optionally
  443. # the relative position of other screens.  The four names after
  444. # primary screen name are the screens to the top, bottom, left and right
  445. # of the primary screen.  In this example, screen 2 is located to the
  446. # right of screen 1.

  448.     Screen "Screen 1"

  450. # Each InputDevice line specifies an InputDevice section name and
  451. # optionally some options to specify the way the device is to be
  452. # used.  Those options include "CorePointer", "CoreKeyboard" and
  453. # "SendCoreEvents".

  455.     InputDevice "Mouse1" "CorePointer"
  456.     InputDevice "Keyboard1" "CoreKeyboard"

  458. EndSection

  460. # Section "DRI"
  461. #    Mode 0666
  462. # EndSection
复制代码
回复 支持 反对

使用道具 举报

lijichao
发表于 2005-4-14 14:55:41 | 显示全部楼层
HorizSync   31.5 - 48.5
48.5有点太低了吧！！！！
回复 支持 反对

使用道具 举报

发表于 2005-4-14 20:35:37 | 显示全部楼层
把水平跟垂直刷新率按显示器的说明书再调一下。。。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-4-14 22:19:33 | 显示全部楼层
EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "MyVideoCard"
    Driver      "vga"
        # unsupported card
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection

我想是这个问题，我的显卡是ATI Radeon9550
我装的FreeBSD是5.21的，fr86还不支持这款显卡
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表