pcmcia网卡驱动安装的问T，请进！

aguang17

[联想笔记本，linux]

机子随机附带的驱动盘中有个关于安装pcmcia网卡的说明：
内容如下：

DGC LN200x CardBus Ethernet Card Installation on Linux

1. Compile the source code :
->Copy the source code rtl8139.c (ver 1.08 above) to a directory
   and execute "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes  
   -O6 -c rtl8139.c -o realtek_cb.o -I/usr/src/linux/pcmcia-cs-3.0.9/include/"
   The directory "pcmcia-cs-3.0.9" stands for the card service version you  
   use. Please change it to the version on your system in order to include  
   proper .h file. The final file is realtek_cb.o

2. Copy driver :
->Copy the file "realtek_cb.o" to "/lib/modules/2.2.14-5.0/pcmcia"

3. Edit config:
->Add 5 lines to the file "/etc/pcmcia/config"
   
   #
   # Device driver definitions
   #
   
   device "realtek_cb"  (==>Add 1/5)
     class "network" module "cb_enabler", "realtek_cb"   (==>Add 2/5)  


   :
   :

   #
   # CardBus Cards
   #

   card "Realtek CardBus Ethernet Card" (==>Add 3/5)
     manfid 0x0000, 0x024C (==>Add 4/5)
     bind "realtek_cb" (==>Add 5/5)

   
   The values 0x0000, 0x024C are JEDEC ID and can be read by typing  
   "cardctl ident" on console with one card on socket.
           

4. Edit linuxconf
->Type "linuxconf" and choose "Config"-->"Networking"-->"Client tasks"-->
   "Basic host information". Select an adapter, enable it, and type "realtek_cb"
   on "Kernel module" and "eth0" (or eth1, eth2) on "Net device". Click on  
   "Accept" button and "Act/change" button.


5. Restart the computer.

6. More information about kernel compile: http://metalab.unc.edu/mdw/HOWTO/Kernel-HOWTO.html
   More information about install: man pcmcia  


依照上述步骤执行：
gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes  
   -O6 -c rtl8139.c -o realtek_cb.o -I/usr/src/linux/pcmcia-cs-3.0.9/include/

返回结果：gcc：realtek_cb.o: no such file or dir...
         gcc: no input file  

编译没有成功，哪位大哥熟悉GCC的帮忙看一下，具体这句命令该怎么写呢；
谢谢；

dsj

你没装gcc

aguang17

这提示应该不是没装GCC的原因吧！