|
|
这些是我公司ＭＹＳＱＬ数据库 在今天出现问题的日志文件所以内容请大家看看 今天数据库当地发什么了 什么变化！请大家帮忙！用
A mysqld process already exists at Fri May 19 14:43:39 CST 2006
A mysqld process already exists at Fri May 19 14:43:54 CST 2006
060519 14:44:21 mysqld ended
060519 14:44:23 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 15:17:07 mysqld started
060519 15:17:07 Can't start server: Bind on TCP/IP port: Address already in use
060519 15:17:07 Do you already have another mysqld server running on port: 3306 ?
060519 15:17:07 Aborting
060519 15:17:07 /usr/libexec/mysqld: Shutdown Complete
060519 15:17:07 mysqld ended
060519 15:18:40 mysqld started
060519 15:18:40 Can't start server: Bind on TCP/IP port: Address already in use
060519 15:18:40 Do you already have another mysqld server running on port: 3306 ?
060519 15:18:40 Aborting
060519 15:18:40 /usr/libexec/mysqld: Shutdown Complete
060519 15:18:40 mysqld ended
060519 15:20:34 mysqld started
060519 15:20:34 Can't start server: Bind on TCP/IP port: Address already in use
060519 15:20:34 Do you already have another mysqld server running on port: 3306 ?
060519 15:20:34 Aborting
060519 15:20:34 /usr/libexec/mysqld: Shutdown Complete
060519 15:20:34 mysqld ended
060519 15:20:58 /usr/libexec/mysqld: Normal shutdown
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 3142 user: 'dadache_f'
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 3080 user: 'overk_db_f'
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 2649 user: 'dz_f'
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 1826 user: 'hrabc_f'
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 1125 user: 'dbvpsinanj_f'
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 676 user: 'nbmodforum1_f'
060519 15:20:59 /usr/libexec/mysqld: Forcing close of thread 99 user: 'phpxf_db_f'
060519 15:23:59 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 15:52:54 /usr/libexec/mysqld: Normal shutdown
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3762 user: 'dz_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3761 user: 'dadache_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3760 user: 'dz_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3759 user: 'usavp2com_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3758 user: 'dadache_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3757 user: 'usavp2com_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3756 user: 'dz_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3755 user: 'usavp2com_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3754 user: 'hrabc_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3753 user: 'dz_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3752 user: 'usavp2com_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3751 user: 'dz_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thread 3750 user: 'usavp2com_f'
060519 15:52:55 /usr/libexec/mysqld: Forcing close of thrA mysqld process already exists at Fri May 19 15:52:56 CST 2006
060519 15:53:53 /usr/libexec/mysqld: Shutdown Complete
060519 15:53:53 mysqld ended
060519 15:55:57 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 16:01:29 mysqld started
060519 16:01:29 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:01:29 Do you already have another mysqld server running on port: 3306 ?
060519 16:01:29 Aborting
060519 16:01:29 /usr/libexec/mysqld: Shutdown Complete
060519 16:01:29 mysqld ended
060519 16:01:34 mysqld started
060519 16:01:34 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:01:34 Do you already have another mysqld server running on port: 3306 ?
060519 16:01:34 Aborting
060519 16:01:34 /usr/libexec/mysqld: Shutdown Complete
060519 16:01:34 mysqld ended
060519 16:03:54 mysqld started
060519 16:03:54 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:03:54 Do you already have another mysqld server running on port: 3306 ?
060519 16:03:54 Aborting
060519 16:03:54 /usr/libexec/mysqld: Shutdown Complete
060519 16:03:54 mysqld ended
060519 16:05:00 mysqld started
060519 16:05:00 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:05:00 Do you already have another mysqld server running on port: 3306 ?
060519 16:05:00 Aborting
060519 16:05:00 /usr/libexec/mysqld: Shutdown Complete
060519 16:05:00 mysqld ended
060519 16:07:35 mysqld started
060519 16:07:35 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:07:35 Do you already have another mysqld server running on port: 3306 ?
060519 16:07:35 Aborting
060519 16:07:35 /usr/libexec/mysqld: Shutdown Complete
060519 16:07:35 mysqld ended
060519 16:11:25 mysqld started
060519 16:11:25 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:11:25 Do you already have another mysqld server running on port: 3306 ?
060519 16:11:25 Aborting
060519 16:11:25 /usr/libexec/mysqld: Shutdown Complete
060519 16:11:25 mysqld ended
060519 16:11:50 mysqld started
060519 16:11:50 Can't start server: Bind on TCP/IP port: Address already in use
060519 16:11:50 Do you already have another mysqld server running on port: 3306 ?
060519 16:11:50 Aborting
060519 16:11:50 /usr/libexec/mysqld: Shutdown Complete
060519 16:11:50 mysqld ended
060519 16:12:02 /usr/libexec/mysqld: Normal shutdown
060519 16:12:02 /usr/libexec/mysqld: Shutdown Complete
060519 16:12:02 mysqld ended
060519 16:14:44 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 17:03:04 /usr/libexec/mysqld: Normal shutdown
060519 17:03:05 /usr/libexec/mysqld: Forcing close of thread 6449 user: 'root'
060519 17:03:05 /usr/libexec/mysqld: Forcing close of thread 6310 user: 'root'
060519 17:03:05 /usr/libexec/mysqld: Forcing close of thread 5291 user: 'dz_f'
060519 17:03:05 /usr/libexec/mysqld: Forcing close of thread 5290 user: 'enjoylife_f'
060519 17:03:05 /usr/libexec/mysqld: Forcing close of thread 5289 user: 'enjoylife_f'
060519 17:03:05 /usr/libexec/my060519 17:05:46 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 17:56:45 mysqld started
060519 17:56:45 Can't start server: Bind on TCP/IP port: Address already in use
060519 17:56:45 Do you already have another mysqld server running on port: 3306 ?
060519 17:56:45 Aborting
060519 17:56:45 /usr/libexec/mysqld: Shutdown Complete
060519 17:56:45 mysqld ended
060519 18:04:05 mysqld started
060519 18:04:05 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:04:05 Do you already have another mysqld server running on port: 3306 ?
060519 18:04:05 Aborting
060519 18:04:05 /usr/libexec/mysqld: Shutdown Complete
060519 18:04:05 mysqld ended
060519 18:04:19 mysqld started
060519 18:04:19 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:04:19 Do you already have another mysqld server running on port: 3306 ?
060519 18:04:19 Aborting
060519 18:04:19 /usr/libexec/mysqld: Shutdown Complete
060519 18:04:19 mysqld ended
060519 18:04:39 mysqld started
060519 18:04:39 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:04:39 Do you already have another mysqld server running on port: 3306 ?
060519 18:04:39 Aborting
060519 18:04:39 /usr/libexec/mysqld: Shutdown Complete
060519 18:04:39 mysqld ended
060519 18:05:23 mysqld started
060519 18:05:23 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:05:23 Do you already have another mysqld server running on port: 3306 ?
060519 18:05:23 Aborting
060519 18:05:23 /usr/libexec/mysqld: Shutdown Complete
060519 18:05:23 mysqld ended
060519 18:05:33 mysqld started
060519 18:05:33 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:05:33 Do you already have another mysqld server running on port: 3306 ?
060519 18:05:33 Aborting
060519 18:05:33 /usr/libexec/mysqld: Shutdown Complete
060519 18:05:33 mysqld ended
060519 18:05:48 mysqld started
060519 18:05:48 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:05:48 Do you already have another mysqld server running on port: 3306 ?
060519 18:05:48 Aborting
060519 18:05:48 /usr/libexec/mysqld: Shutdown Complete
060519 18:05:48 mysqld ended
060519 18:05:50 mysqld started
060519 18:05:50 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:05:50 Do you already have another mysqld server running on port: 3306 ?
060519 18:05:50 Aborting
060519 18:05:50 /usr/libexec/mysqld: Shutdown Complete
060519 18:05:50 mysqld ended
060519 18:06:02 mysqld started
060519 18:06:02 Can't start server: Bind on TCP/IP port: Address already in use
060519 18:06:02 Do you already have another mysqld server running on port: 3306 ?
060519 18:06:02 Aborting
060519 18:06:02 /usr/libexec/mysqld: Shutdown Complete
060519 18:06:02 mysqld ended
060519 18:06:30 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 18:28:06 Warning: Retrying repair of: './xishen_0r/cdb_admingroups' with keycache
060519 18:28:06 Warning: Retrying repair of: './xishen_0r/cdb_adminsessions' with keycache
060060519 19:08:24 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:04:05 mysqld started
060519 20:04:05 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:04:05 Do you already have another mysqld server running on port: 3306 ?
060519 20:04:05 Aborting
060519 20:04:05 /usr/libexec/mysqld: Shutdown Complete
060519 20:04:05 mysqld ended
060519 20:04:34 mysqld started
060519 20:04:34 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:04:34 Do you already have another mysqld server running on port: 3306 ?
060519 20:04:34 Aborting
060519 20:04:34 /usr/libexec/mysqld: Shutdown Complete
060519 20:04:34 mysqld ended
060519 20:05:11 /usr/libexec/mysqld: Normal shutdown
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 2788 user: 'root'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1628 user: 'whzxc_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1627 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1626 user: 'discuz_w'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1625 user: 'cake_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1624 user: 'dz_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1623 user: 'dz_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1622 user: 'dz_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1621 user: 'discuz_w'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1620 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1619 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1618 user: 'whzxc_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1617 user: 'discuz_w'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1616 user: 'dz_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1615 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1614 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1613 user: 'crystaldj_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1612 user: 'whzxc_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1611 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1610 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1609 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1608 user: 'pfbag_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1607 user: 'discuz_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1606 user: 'whzxc_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1605 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1604 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1603 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1602 user: 'thtcs_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1601 user: 'usavp2com_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1600 user: 'discuz_w'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1599 user: 'dz_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1598 user: 'wlwycn_f'
060519 20:05:12 /usr/libexec/mysqld: Forcing close of thread 1597 user: 'cake_f'
060519 20:05:12 /us060519 20:07:53 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:20:01 mysqld started
060519 20:20:01 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:20:01 Do you already have another mysqld server running on port: 3306 ?
060519 20:20:01 Aborting
060519 20:20:01 /usr/libexec/mysqld: Shutdown Complete
060519 20:20:01 mysqld ended
060519 20:20:09 mysqld started
060519 20:20:09 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:20:09 Do you already have another mysqld server running on port: 3306 ?
060519 20:20:09 Aborting
060519 20:20:09 /usr/libexec/mysqld: Shutdown Complete
060519 20:20:09 mysqld ended
060519 20:24:12 /usr/libexec/mysqld: Normal shutdown
060519 20:24:13 /usr/libexec/mysqld: Forcing close of thread 781 user: 'dbbeijignaa_f'
060519 20:24:13 /usr/libexec/mysqld: Forcing close of thread 140 user: 'dbeaseroomshop_f'
060519 20:24:13 /usr/libexec/mysqld: Forcing close of thread 59 user: 'enjoylife_f'
060519 20:24:21 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:24:25 mysqld started
060519 20:24:25 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:24:25 Do you already have another mysqld server running on port: 3306 ?
060519 20:24:25 Aborting
060519 20:24:25 /usr/libexec/mysqld: Shutdown Complete
060519 20:24:25 mysqld ended
060519 20:24:29 mysqld started
060519 20:24:29 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:24:29 Do you already have another mysqld server running on port: 3306 ?
060519 20:24:29 Aborting
060519 20:24:29 /usr/libexec/mysqld: Shutdown Complete
060519 20:24:29 mysqld ended
060519 20:24:51 /usr/libexec/mysqld: Shutdown Complete
060519 20:24:51 mysqld ended
060519 20:24:52 mysqld started
060519 20:24:52 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:24:52 Do you already have another mysqld server running on port: 3306 ?
060519 20:24:52 Aborting
060519 20:24:52 /usr/libexec/mysqld: Shutdown Complete
060519 20:24:52 mysqld ended
060519 20:26:28 /usr/libexec/mysqld: Normal shutdown
060519 20:26:28 /usr/libexec/mysqld: Shutdown Complete
060519 20:26:28 mysqld ended
060519 20:26:49 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:27:17 mysqld started
060519 20:27:17 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:27:17 Do you already have another mysqld server running on port: 3306 ?
060519 20:27:17 Aborting
060519 20:27:17 /usr/libexec/mysqld: Shutdown Complete
060519 20:27:17 mysqld ended
060519060519 20:30:46 mysqld ended
060519 20:30:54 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:31:45 mysqld started
060519 20:31:45 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:31:45 Do you already have another mysqld server running on port: 3306 ?
060519 20:31:45 Aborting
060519 20:31:45 /usr/libexec/mysqld: Shutdown Complete
060519 20:31:45 mysqld ended
060519 20:31:46 mysqld started
060519 20:31:46 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:31:46 Do you already have another mysqld server running on port: 3306 ?
060519 20:31:46 Aborting
060519 20:31:46 /usr/libexec/mysqld: Shutdown Complete
060519 20:31:46 mysqld ended
060519 20:32:05 mysqld started
060519 20:32:05 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:32:05 Do you already have another mysqld server running on port: 3306 ?
060519 20:32:05 Aborting
060519 20:32:05 /usr/libexec/mysqld: Shutdown Complete
060519 20:32:05 mysqld ended
060519 20:35:18 /usr/libexec/mysqld: Normal shutdown
060519 20:35:18 /usr/libexec/mysqld: Shutdown Complete
060519 20:35:18 mysqld ended
060519 20:39:57 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:40:01 mysqld started
060519 20:40:01 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:40:01 Do you already have another mysqld server running on port: 3306 ?
060519 20:40:01 Aborting
060519 20:40:01 /usr/libexec/mysqld: Shutdown Complete
060519 20:40:01 mysqld ended
060519 20:40:04 mysqld started
060519 20:40:04 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:40:04 Do you already have another mysqld server running on port: 3306 ?
060519 20:40:04 Aborting
060519 20:40:04 /usr/libexec/mysqld: Shutdown Complete
060519 20:40:04 mysqld ended
060519 20:41:53 /usr/libexec/mysqld: Normal shutdown
060519 20:41:53 /usr/libexec/mysqld: Shutdown Complete
060519 20:41:53 mysqld ended
060519 20:48:23 mysqld started
Cannot initialize InnoDB as 'innodb_data_file_path' is not set.
If you do not want to use transactional InnoDB tables, add a line
skip-innodb
to the [mysqld] section of init parameters in your my.cnf
or my.ini. If you want to use InnoDB tables, add to the [mysqld]
section, for example,
innodb_data_file_path = ibdata1:10M:autoextend
But to get good performance you should adjust for your hardware
the InnoDB startup options listed in section 2 at
http://www.innodb.com/ibman.html
/usr/libexec/mysqld: ready for connections
060519 20:48:30 mysqld started
060519 20:48:30 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:48:30 Do you already have another mysqld server running on port: 3306 ?
060519 20:48:30 Aborting
060519 20:48:30 /usr/libexec/mysqld: Shutdown Complete
060519 20:48:30 mysqld ended
060519 20:48:58 mysqld started
060519 20:48:58 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:48:58 Do you already have another mysqld server running on port: 3306 ?
060519 20:48:58 Aborting
060519 20:48:58 /usr/libexec/mysqld: Shutdown Complete
060519 20:48:58 mysqld ended
060519 20:49:11 mysqld started
060519 20:49:11 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:49:11 Do you already have another mysqld server running on port: 3306 ?
060519 20:49:11 Aborting
060519 20:49:11 /usr/libexec/mysqld: Shutdown Complete
060519 20:49:11 mysqld ended
060519 20:49:23 mysqld started
060519 20:49:23 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:49:23 Do you already have another mysqld server running on port: 3306 ?
060519 20:49:23 Aborting
060519 20:49:23 /usr/libexec/mysqld: Shutdown Complete
060519 20:49:23 mysqld ended
060519 20:53:06 mysqld started
060519 20:53:06 Can't start server: Bind on TCP/IP port: Address already in use
060519 20:53:06 Do you already have another mysqld server running on port: 3306 ?
060519 20:53:06 Aborting
060519 20:53:06 /usr/libexec/mysqld: Shutdown Complete
060519 20:53:06 mysqld ended
060519 21:05:40 mysqld started
060519 21:05:40 Can't start server: Bind on TCP/IP port: Address already in use
060519 21:05:40 Do you already have another mysqld server running on port: 3306 ?
060519 21:05:40 Aborting
060519 21:05:40 /usr/libexec/mysqld: Shutdown Complete
060519 21:05:40 mysqld ended
060519 21:06:38 /usr/libexec/mysqld: Normal shutdown
060519 21:06:38 /usr/libexec/mysqld: Shutdown Complete
060519 21:06:38 mysqld ended |
|
IP卡
狗仔卡
发表于 2006-5-19 21:54:21
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡