Linux下有什么出查看CPU，硬盘，主板温度的软件伐

zlowly

hp/compaq也不是一整系列不好的，我用着HP compaq 2210b几个月，感觉还可以，散热、噪音控制方面都做得不错。

其实笔记本一个关键就是看价钱，一分钱一分货。其实笔记本设计远比台式机要难。不象一些国内公司只会拼价格拼配置，HP，IBM这些国际公司的笔记本设计能力是不用怀疑的，只不过低端笔记本的话它没必要投入太大设计成本而已。

latteye

[root@arch-fudan-latteye down]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1:     +1.25 V  (min =  +1.30 V, max =  +1.71 V)
VCore 2:     +1.49 V  (min =  +1.30 V, max =  +1.71 V)
+3.3V:       +3.31 V  (min =  +2.82 V, max =  +3.79 V)
+5V:         +5.00 V  (min =  +2.53 V, max =  +6.69 V)
+12V:       +12.71 V  (min = +13.01 V, max = +15.50 V)
-12V:        +2.44 V  (min =  +6.06 V, max =  -8.74 V)
-5V:         +2.94 V  (min =  -1.43 V, max =  +3.39 V)
V5SB:        +5.46 V  (min =  +3.12 V, max =  +4.33 V)
VBat:        +2.98 V  (min =  +2.99 V, max =  +4.08 V)
fan1:       3245 RPM  (min = 5818 RPM, div = 2)
fan2:          0 RPM  (min = 3552 RPM, div = 2)
fan3:          0 RPM  (min = 2922 RPM, div = 2)
temp1:       +64.0°C  (high = +29.0°C, hyst = +63.0°C)  sensor = thermistor
temp2:       +49.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
temp3:       +52.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
cpu0_vid:   +1.500 V
beep_enable:enabled

Debentoo Gao

Post by zlowly;1818948
hp/compaq也不是一整系列不好的，我用着HP compaq 2210b几个月，感觉还可以，散热、噪音控制方面都做得不错。

其实笔记本一个关键就是看价钱，一分钱一分货。其实笔记本设计远比台式机要难。不象一些国内公司只会拼价格拼配置，HP，IBM这些国际公司的笔记本设计能力是不用怀疑的，只不过低端笔记本的话它没必要投入太大设计成本而已。

现在我觉得买HP Compaq V3000系列还不如去买国产的同价位笔记本，配置还能弄高点，反正到后来总会出问题。V3000黑屏的故障在我机器上已经体验出来了，痛苦，重启黑屏，开机黑屏，得关了再开一两次才能启动:yun:

Debentoo Gao

Post by latteye;1818980
[root@arch-fudan-latteye down]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1:     +1.25 V  (min =  +1.30 V, max =  +1.71 V)
VCore 2:     +1.49 V  (min =  +1.30 V, max =  +1.71 V)
+3.3V:       +3.31 V  (min =  +2.82 V, max =  +3.79 V)
+5V:         +5.00 V  (min =  +2.53 V, max =  +6.69 V)
+12V:       +12.71 V  (min = +13.01 V, max = +15.50 V)
-12V:        +2.44 V  (min =  +6.06 V, max =  -8.74 V)
-5V:         +2.94 V  (min =  -1.43 V, max =  +3.39 V)
V5SB:        +5.46 V  (min =  +3.12 V, max =  +4.33 V)
VBat:        +2.98 V  (min =  +2.99 V, max =  +4.08 V)
fan1:       3245 RPM  (min = 5818 RPM, div = 2)
fan2:          0 RPM  (min = 3552 RPM, div = 2)
fan3:          0 RPM  (min = 2922 RPM, div = 2)
temp1:       +64.0°C  (high = +29.0°C, hyst = +63.0°C)  sensor = thermistor
temp2:       +49.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
temp3:       +52.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
cpu0_vid:   +1.500 V
beep_enable:enabled

我这里怎么只有这么点信息

[miyug@miyu-laptop BitStormLite-0.2p]$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +52.0°C
Core1 Temp:  +47.0°C

lymanrb

Post by zhuqin_83;1818865
伐。。。上海人氏㖏

似乎是hp/compaq的通病，我的也烫手。不过我这里sensors-applet只能看cpu的，硬盘之类的检测不到。

hddtemp

blue_stone

Post by latteye;1818980
[root@arch-fudan-latteye down]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1:     +1.25 V  (min =  +1.30 V, max =  +1.71 V)
VCore 2:     +1.49 V  (min =  +1.30 V, max =  +1.71 V)
+3.3V:       +3.31 V  (min =  +2.82 V, max =  +3.79 V)
+5V:         +5.00 V  (min =  +2.53 V, max =  +6.69 V)
+12V:       +12.71 V  (min = +13.01 V, max = +15.50 V)
-12V:        +2.44 V  (min =  +6.06 V, max =  -8.74 V)
-5V:         +2.94 V  (min =  -1.43 V, max =  +3.39 V)
V5SB:        +5.46 V  (min =  +3.12 V, max =  +4.33 V)
VBat:        +2.98 V  (min =  +2.99 V, max =  +4.08 V)
fan1:       3245 RPM  (min = 5818 RPM, div = 2)
fan2:          0 RPM  (min = 3552 RPM, div = 2)
fan3:          0 RPM  (min = 2922 RPM, div = 2)
temp1:       +64.0°C  (high = +29.0°C, hyst = +63.0°C)  sensor = thermistor
temp2:       +49.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
temp3:       +52.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
cpu0_vid:   +1.500 V
beep_enable:enabled

使用root先运行一下sensors-detect, 并加载这些kernel module, 就能看到很多了.