|
我电脑的Kooka昨天升级后找不到扫描仪,扫描仪是mustek1200UB,不知是怎么回事,以下是运行的信息:
[zima@pc020 MySoft]$ lsusb
Bus 004 Device 005: ID 067b:2506 Prolific Technology, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 055f:0006 Mustek Systems, Inc. ScanExpress 1200 UB
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[zima@pc020 MySoft]$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x055f, product=0x0006, chip=MA-1017?) at libusb:002:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
[zima@pc020 MySoft]$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
谁能帮我看看什么问题? |
|