设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 发行版讨论区 —— LinuxSir.cn › Archlinux讨论区 › 开机启动极慢，提示DRDY错误（有图）
返回列表 发新帖
查看: 1536|回复: 4

开机启动极慢，提示DRDY错误（有图）

[复制链接]
发表于 2008-11-16 02:30:28 | 显示全部楼层 |阅读模式
大家好！第一次在Arch版发贴。本人的Ubuntu 8.04 Hardy启动速度极慢，似乎是提示DRDY错误。我是SATA硬盘。dmesg和图片如下：
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic)
  4. [    0.000000] BIOS-provided physical RAM map:
  5. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  6. [    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  7. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  8. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
  9. [    0.000000]  BIOS-e820: 000000007fe90000 - 000000007fee3000 (ACPI NVS)
  10. [    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
  11. [    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  14. [    0.000000] 1150MB HIGHMEM available.
  15. [    0.000000] 896MB LOWMEM available.
  16. [    0.000000] found SMP MP-table at 000f3860
  17. [    0.000000] Entering add_active_range(0, 0, 523920) 0 entries of 256 used
  18. [    0.000000] Zone PFN ranges:
  19. [    0.000000]   DMA             0 ->     4096
  20. [    0.000000]   Normal       4096 ->   229376
  21. [    0.000000]   HighMem    229376 ->   523920
  22. [    0.000000] Movable zone start PFN for each node
  23. [    0.000000] early_node_map[1] active PFN ranges
  24. [    0.000000]     0:        0 ->   523920
  25. [    0.000000] On node 0 totalpages: 523920
  26. [    0.000000]   DMA zone: 32 pages used for memmap
  27. [    0.000000]   DMA zone: 0 pages reserved
  28. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  29. [    0.000000]   Normal zone: 1760 pages used for memmap
  30. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  31. [    0.000000]   HighMem zone: 2301 pages used for memmap
  32. [    0.000000]   HighMem zone: 292243 pages, LIFO batch:31
  33. [    0.000000]   Movable zone: 0 pages used for memmap
  34. [    0.000000] DMI 2.5 present.
  35. [    0.000000] ACPI: RSDP signature @ 0xC00F7A40 checksum 0
  36. [    0.000000] ACPI: RSDP 000F7A40, 0014 (r0 IntelR)
  37. [    0.000000] ACPI: RSDT 7FEE3000, 0034 (r1 _ASUS_ Notebook 42302E31 AWRD        0)
  38. [    0.000000] ACPI: FACP 7FEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
  39. [    0.000000] ACPI: DSDT 7FEE3100, 4DFF (r1 INTELR AWRDACPI     1000 MSFT  3000000)
  40. [    0.000000] ACPI: FACS 7FE90000, 0040
  41. [    0.000000] ACPI: MCFG 7FEE7FC0, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
  42. [    0.000000] ACPI: APIC 7FEE7F00, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
  43. [    0.000000] ACPI: SLIC 7FEE7FFC, 0176 (r1 _ASUS_ Notebook 11000624 MSFT       97)
  44. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  45. [    0.000000] ACPI: Local APIC address 0xfee00000
  46. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  47. [    0.000000] Processor #0 6:15 APIC version 20
  48. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  49. [    0.000000] Processor #1 6:15 APIC version 20
  50. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
  51. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
  52. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  53. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  54. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  55. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  56. [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  57. [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
  58. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  59. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  60. [    0.000000] ACPI: IRQ0 used by override.
  61. [    0.000000] ACPI: IRQ2 used by override.
  62. [    0.000000] ACPI: IRQ9 used by override.
  63. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  64. [    0.000000] Using ACPI (MADT) for SMP configuration information
  65. [    0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
  66. [    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  67. [    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
  68. [    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
  69. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519827
  70. [    0.000000] Kernel command line: root=UUID=f6682f2b-585f-444d-98b9-a59464af6c64 ro quiet splash
  71. [    0.000000] mapped APIC to ffffb000 (fee00000)
  72. [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
  73. [    0.000000] Enabling fast FPU save and restore... done.
  74. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  75. [    0.000000] Initializing CPU#0
  76. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  77. [    0.000000] Detected 1795.851 MHz processor.
  78. [   21.311755] Console: colour VGA+ 80x25
  79. [   21.311758] console [tty0] enabled
  80. [   21.311974] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  81. [   21.312219] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  82. [   21.399668] Memory: 2065572k/2095680k available (2177k kernel code, 28784k reserved, 1005k data, 368k init, 1178176k highmem)
  83. [   21.399674] virtual kernel memory layout:
  84. [   21.399675]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
  85. [   21.399676]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  86. [   21.399677]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  87. [   21.399678]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  88. [   21.399679]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
  89. [   21.399680]       .data : 0xc03205e4 - 0xc041bdc4   (1005 kB)
  90. [   21.399681]       .text : 0xc0100000 - 0xc03205e4   (2177 kB)
  91. [   21.399684] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  92. [   21.399721] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  93. [   21.479716] Calibrating delay using timer specific routine.. 3594.74 BogoMIPS (lpj=7189495)
  94. [   21.479739] Security Framework initialized
  95. [   21.479745] SELinux:  Disabled at boot.
  96. [   21.479756] AppArmor: AppArmor initialized
  97. [   21.479760] Failure registering capabilities with primary security module.
  98. [   21.479767] Mount-cache hash table entries: 512
  99. [   21.479879] Initializing cgroup subsys ns
  100. [   21.479883] Initializing cgroup subsys cpuacct
  101. [   21.479893] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
  102. [   21.479900] monitor/mwait feature present.
  103. [   21.479902] using mwait in idle threads.
  104. [   21.479905] CPU: L1 I cache: 32K, L1 D cache: 32K
  105. [   21.479907] CPU: L2 cache: 1024K
  106. [   21.479910] CPU: Physical Processor ID: 0
  107. [   21.479911] CPU: Processor Core ID: 0
  108. [   21.479913] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
  109. [   21.479921] Compat vDSO mapped to ffffe000.
  110. [   21.479933] Checking 'hlt' instruction... OK.
  111. [   21.496131] SMP alternatives: switching to UP code
  112. [   21.497677] Early unpacking initramfs... done
  113. [   21.818891] ACPI: Core revision 20070126
  114. [   21.818932] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  115. [   21.821340] CPU0: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz stepping 0d
  116. [   21.821354] SMP alternatives: switching to SMP code
  117. [   21.822027] Booting processor 1/1 eip 3000
  118. [   21.832093] Initializing CPU#1
  119. [   21.911575] Calibrating delay using timer specific routine.. 3591.89 BogoMIPS (lpj=7183796)
  120. [   21.911581] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
  121. [   21.911586] monitor/mwait feature present.
  122. [   21.911589] CPU: L1 I cache: 32K, L1 D cache: 32K
  123. [   21.911590] CPU: L2 cache: 1024K
  124. [   21.911592] CPU: Physical Processor ID: 0
  125. [   21.911593] CPU: Processor Core ID: 1
  126. [   21.911595] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
  127. [   21.912021] CPU1: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz stepping 0d
  128. [   21.912040] Total of 2 processors activated (7186.64 BogoMIPS).
  129. [   21.912183] ENABLING IO-APIC IRQs
  130. [   21.912348] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  131. [   22.059633] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  132. [   22.079637] Brought up 2 CPUs
  133. [   22.079659] CPU0 attaching sched-domain:
  134. [   22.079662]  domain 0: span 03
  135. [   22.079663]   groups: 01 02
  136. [   22.079666] CPU1 attaching sched-domain:
  137. [   22.079668]  domain 0: span 03
  138. [   22.079669]   groups: 02 01
  139. [   22.079865] net_namespace: 64 bytes
  140. [   22.079871] Booting paravirtualized kernel on bare hardware
  141. [   22.080281] Time:  1:51:41  Date: 11/16/08
  142. [   22.080306] NET: Registered protocol family 16
  143. [   22.080474] EISA bus registered
  144. [   22.080478] ACPI: bus type pci registered
  145. [   22.081332] PCI: PCI BIOS revision 3.00 entry at 0xfa070, last bus=2
  146. [   22.081334] PCI: Using configuration type 1
  147. [   22.081339] Setting up standard PCI resources
  148. [   22.088693] ACPI: EC: Look up EC in DSDT
  149. [   22.092956] ACPI: Interpreter enabled
  150. [   22.092958] ACPI: (supports S0 S1 S4 S5)
  151. [   22.092971] ACPI: Using IOAPIC for interrupt routing
  152. [   22.098122] ACPI: PCI Root Bridge [PCI0] (0000:00)
  153. [   22.098801] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
  154. [   22.098805] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
  155. [   22.099198] PCI: Transparent bridge - 0000:00:1e.0
  156. [   22.099221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  157. [   22.099391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  158. [   22.110197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  159. [   22.110312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  160. [   22.110426] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
  161. [   22.110538] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  162. [   22.110650] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
  163. [   22.110762] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  164. [   22.110874] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
  165. [   22.110986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  166. [   22.111105] Linux Plug and Play Support v0.97 (c) Adam Belay
  167. [   22.111134] pnp: PnP ACPI init
  168. [   22.111141] ACPI: bus type pnp registered
  169. [   22.114285] pnp: PnP ACPI: found 16 devices
  170. [   22.114287] ACPI: ACPI bus type pnp unregistered
  171. [   22.114291] PnPBIOS: Disabled by ACPI PNP
  172. [   22.114496] PCI: Using ACPI for IRQ routing
  173. [   22.114499] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  174. [   22.151577] NET: Registered protocol family 8
  175. [   22.151580] NET: Registered protocol family 20
  176. [   22.151657] AppArmor: AppArmor Filesystem Enabled
  177. [   22.155576] Time: tsc clocksource has been installed.
  178. [   22.171671] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
  179. [   22.171675] system 00:01: ioport range 0x800-0x87f has been reserved
  180. [   22.171679] system 00:01: ioport range 0x880-0x88f has been reserved
  181. [   22.171696] system 00:0c: ioport range 0x400-0x4bf could not be reserved
  182. [   22.171706] system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
  183. [   22.171715] system 00:0f: iomem range 0xf0000-0xfffff could not be reserved
  184. [   22.171719] system 00:0f: iomem range 0x7ff00000-0x7fffffff has been reserved
  185. [   22.171723] system 00:0f: iomem range 0x7fe90000-0x7fefffff could not be reserved
  186. [   22.171727] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
  187. [   22.171731] system 00:0f: iomem range 0x100000-0x7fe8ffff could not be reserved
  188. [   22.171735] system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
  189. [   22.171739] system 00:0f: iomem range 0xfed14000-0xfed1dfff could not be reserved
  190. [   22.171743] system 00:0f: iomem range 0xfed20000-0xfed9ffff could not be reserved
  191. [   22.171747] system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved
  192. [   22.171751] system 00:0f: iomem range 0xffb00000-0xffb7ffff could not be reserved
  193. [   22.171755] system 00:0f: iomem range 0xfff00000-0xffffffff could not be reserved
  194. [   22.171759] system 00:0f: iomem range 0xe0000-0xeffff has been reserved
  195. [   22.202123] PCI: Bridge: 0000:00:01.0
  196. [   22.202125]   IO window: c000-cfff
  197. [   22.202129]   MEM window: f8000000-fbffffff
  198. [   22.202132]   PREFETCH window: d0000000-dfffffff
  199. [   22.202135] PCI: Bridge: 0000:00:1e.0
  200. [   22.202138]   IO window: d000-dfff
  201. [   22.202142]   MEM window: fde00000-fdefffff
  202. [   22.202145]   PREFETCH window: fdd00000-fddfffff
  203. [   22.202162] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  204. [   22.202167] PCI: Setting latency timer of device 0000:00:01.0 to 64
  205. [   22.202176] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  206. [   22.202185] NET: Registered protocol family 2
  207. [   22.243791] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  208. [   22.244026] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  209. [   22.244448] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  210. [   22.244706] TCP: Hash tables configured (established 131072 bind 65536)
  211. [   22.244708] TCP reno registered
  212. [   22.255929] checking if image is initramfs... it is
  213. [   22.699709] Switched to high resolution mode on CPU 1
  214. [   22.703602] Switched to high resolution mode on CPU 0
  215. [   22.888943] Freeing initrd memory: 7403k freed
  216. [   22.889611] audit: initializing netlink socket (disabled)
  217. [   22.889623] audit(1226800301.368:1): initialized
  218. [   22.889808] highmem bounce pool size: 64 pages
  219. [   22.891548] VFS: Disk quotas dquot_6.5.1
  220. [   22.891614] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  221. [   22.891731] io scheduler noop registered
  222. [   22.891733] io scheduler anticipatory registered
  223. [   22.891734] io scheduler deadline registered
  224. [   22.891744] io scheduler cfq registered (default)
  225. [   22.891877] Boot video device is 0000:01:00.0
  226. [   22.891967] PCI: Setting latency timer of device 0000:00:01.0 to 64
  227. [   22.892002] assign_interrupt_mode Found MSI capability
  228. [   22.892030] Allocate Port Service[0000:00:01.0:pcie00]
  229. [   22.892236] isapnp: Scanning for PnP cards...
  230. [   23.245459] isapnp: No Plug & Play device found
  231. [   23.267862] Real Time Clock Driver v1.12ac
  232. [   23.267958] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  233. [   23.268067] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  234. [   23.268190] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  235. [   23.268705] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  236. [   23.268920] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  237. [   23.269649] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  238. [   23.269708] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  239. [   23.269803] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  240. [   23.272097] serio: i8042 KBD port at 0x60,0x64 irq 1
  241. [   23.272101] serio: i8042 AUX port at 0x60,0x64 irq 12
  242. [   23.303219] mice: PS/2 mouse device common for all mice
  243. [   23.303344] EISA: Probing bus 0 at eisa.0
  244. [   23.303372] EISA: Detected 0 cards.
  245. [   23.303375] cpuidle: using governor ladder
  246. [   23.303376] cpuidle: using governor menu
  247. [   23.303451] NET: Registered protocol family 1
  248. [   23.303476] Using IPI No-Shortcut mode
  249. [   23.303501] registered taskstats version 1
  250. [   23.303597]   Magic number: 0:674:862
  251. [   23.303630]   hash matches device ptyw0
  252. [   23.303658] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  253. [   23.303660] EDD information not available.
  254. [   23.303795] Freeing unused kernel memory: 368k freed
  255. [   23.303818] Write protecting the kernel read-only data: 801k
  256. [   23.322124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  257. [   24.511740] fuse init (API version 7.9)
  258. [   24.526747] ACPI: Fan [FAN] (on)
  259. [   24.532893] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
  260. [   24.532905] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
  261. [   24.534330] ACPI: Thermal Zone [THRM] (29 C)
  262. [   24.651777] usbcore: registered new interface driver usbfs
  263. [   24.651799] usbcore: registered new interface driver hub
  264. [   24.652228] usbcore: registered new device driver usb
  265. [   24.663580] USB Universal Host Controller Interface driver v3.0
  266. [   24.663639] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
  267. [   24.663650] PCI: Setting latency timer of device 0000:00:1a.0 to 64
  268. [   24.663654] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  269. [   24.663861] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  270. [   24.663890] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
  271. [   24.664018] usb usb1: configuration #1 chosen from 1 choice
  272. [   24.664039] hub 1-0:1.0: USB hub found
  273. [   24.664044] hub 1-0:1.0: 2 ports detected
  274. [   24.767604] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 17
  275. [   24.767616] PCI: Setting latency timer of device 0000:00:1a.1 to 64
  276. [   24.767620] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  277. [   24.767645] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
  278. [   24.767672] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fe00
  279. [   24.767779] usb usb2: configuration #1 chosen from 1 choice
  280. [   24.767801] hub 2-0:1.0: USB hub found
  281. [   24.767806] hub 2-0:1.0: 2 ports detected
  282. [   24.871582] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 18
  283. [   24.871593] PCI: Setting latency timer of device 0000:00:1a.2 to 64
  284. [   24.871597] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  285. [   24.871620] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
  286. [   24.871646] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
  287. [   24.871759] usb usb3: configuration #1 chosen from 1 choice
  288. [   24.871781] hub 3-0:1.0: USB hub found
  289. [   24.871786] hub 3-0:1.0: 2 ports detected
  290. [   24.939319] SCSI subsystem initialized
  291. [   24.959541] libata version 3.00 loaded.
  292. [   24.975544] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
  293. [   24.975557] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  294. [   24.975561] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  295. [   24.975585] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
  296. [   24.975614] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fc00
  297. [   24.975718] usb usb4: configuration #1 chosen from 1 choice
  298. [   24.975740] hub 4-0:1.0: USB hub found
  299. [   24.975745] hub 4-0:1.0: 2 ports detected
  300. [   25.076962] FDC 0 is a post-1991 82077
  301. [   25.079468] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
  302. [   25.079479] PCI: Setting latency timer of device 0000:00:1d.1 to 64
  303. [   25.079483] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  304. [   25.079506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
  305. [   25.079529] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fb00
  306. [   25.079633] usb usb5: configuration #1 chosen from 1 choice
  307. [   25.079655] hub 5-0:1.0: USB hub found
  308. [   25.079659] hub 5-0:1.0: 2 ports detected
  309. [   25.183427] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
  310. [   25.183438] PCI: Setting latency timer of device 0000:00:1d.2 to 64
  311. [   25.183442] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  312. [   25.183465] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
  313. [   25.183491] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fa00
  314. [   25.183604] usb usb6: configuration #1 chosen from 1 choice
  315. [   25.183625] hub 6-0:1.0: USB hub found
  316. [   25.183630] hub 6-0:1.0: 2 ports detected
  317. [   25.287396] r8169 Gigabit Ethernet driver 2.2LK loaded
  318. [   25.287422] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 21
  319. [   25.287501] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
  320. [   25.287510] PCI: Setting latency timer of device 0000:00:1a.7 to 64
  321. [   25.287514] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  322. [   25.287540] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
  323. [   25.288187] eth0: RTL8169sc/8110sc at 0xf885a000, 00:00:4c:03:7c:ba, XID 18000000 IRQ 21
  324. [   25.291431] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
  325. [   25.291439] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfdfff000
  326. [   25.310273] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  327. [   25.310395] usb usb7: configuration #1 chosen from 1 choice
  328. [   25.310418] hub 7-0:1.0: USB hub found
  329. [   25.310424] hub 7-0:1.0: 6 ports detected
  330. [   25.414332] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
  331. [   25.414344] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  332. [   25.414348] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  333. [   25.414371] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
  334. [   25.418281] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  335. [   25.418286] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffe000
  336. [   25.434226] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  337. [   25.434341] usb usb8: configuration #1 chosen from 1 choice
  338. [   25.434364] hub 8-0:1.0: USB hub found
  339. [   25.434369] hub 8-0:1.0: 6 ports detected
  340. [   25.538369] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 18
  341. [   25.538400] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  342. [   25.538412] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
  343. [   25.538432] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 18
  344. [   25.538451] PCI: Setting latency timer of device 0000:00:1f.5 to 64
  345. [   25.538460] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
  346. [   25.550449] ata_piix 0000:00:1f.2: version 2.12
  347. [   25.550456] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
  348. [   25.550473] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 18
  349. [   25.550502] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  350. [   25.551200] scsi0 : ata_piix
  351. [   25.551247] scsi1 : ata_piix
  352. [   25.551694] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 18
  353. [   25.551697] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 18
  354. [   25.880727] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
  355. [   25.880747] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 18
  356. [   25.880777] PCI: Setting latency timer of device 0000:00:1f.5 to 64
  357. [   25.880809] scsi2 : ata_piix
  358. [   25.880996] scsi3 : ata_piix
  359. [   25.881296] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 18
  360. [   25.881298] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 18
  361. [   26.069601] ata3.00: ATA-8: ST3320613AS, SD22, max UDMA/133
  362. [   26.069607] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
  363. [   26.125586] ata3.00: configured for UDMA/133
  364. [   26.442022] ata4.00: ATAPI: TSSTcorpDVD-ROM TS-H352D, CM00, max UDMA/33
  365. [   26.613962] ata4.00: configured for UDMA/33
  366. [   26.614078] scsi 2:0:0:0: Direct-Access     ATA      ST3320613AS      SD22 PQ: 0 ANSI: 5
  367. [   32.111491] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  368. [   32.111505] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
  369. [   32.111507]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
  370. [   32.111509]          res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  371. [   32.111513] ata4.00: status: { DRDY }
  372. [   37.149386] ata4: port is slow to respond, please be patient (Status 0xd0)
  373. [   42.131339] ata4: device not ready (errno=-16), forcing hardreset
  374. [   42.131345] ata4: soft resetting link
  375. [   42.623342] ata4.00: configured for UDMA/33
  376. [   42.623357] ata4: EH complete
  377. [   48.120882] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  378. [   48.120896] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
  379. [   48.120898]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
  380. [   48.120899]          res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  381. [   48.120904] ata4.00: status: { DRDY }
  382. [   53.158772] ata4: port is slow to respond, please be patient (Status 0xd0)
  383. [   58.140709] ata4: device not ready (errno=-16), forcing hardreset
  384. [   58.140715] ata4: soft resetting link
  385. [   58.632726] ata4.00: configured for UDMA/33
  386. [   58.632740] ata4: EH complete
  387. [   64.131243] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  388. [   64.131254] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
  389. [   64.131255]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
  390. [   64.131257]          res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  391. [   64.131259] ata4.00: status: { DRDY }
  392. [   69.172145] ata4: port is slow to respond, please be patient (Status 0xd0)
  393. [   74.150094] ata4: device not ready (errno=-16), forcing hardreset
  394. [   74.150100] ata4: soft resetting link
  395. [   74.642105] ata4.00: configured for UDMA/33
  396. [   74.642121] ata4: EH complete
  397. [   80.139653] ata4.00: limiting speed to UDMA/25:PIO4
  398. [   80.139659] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  399. [   80.139672] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
  400. [   80.139674]          cdb 12 00 00 00 60 00 00 00  00 00 00 00 00 00 00 00
  401. [   80.139676]          res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  402. [   80.139679] ata4.00: status: { DRDY }
  403. [   85.177545] ata4: port is slow to respond, please be patient (Status 0xd0)
  404. [   90.163467] ata4: device not ready (errno=-16), forcing hardreset
  405. [   90.163473] ata4: soft resetting link
  406. [   90.655489] ata4.00: configured for UDMA/25
  407. [   90.655511] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
  408. [   90.655514] ata4: EH complete
  409. [   90.656072] scsi 3:0:0:0: CD-ROM            TSSTcorp DVD-ROM TS-H352D CM00 PQ: 0 ANSI: 5
  410. [   90.663629] Driver 'sd' needs updating - please use bus_type methods
  411. [   90.663706] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
  412. [   90.663717] sd 2:0:0:0: [sda] Write Protect is off
  413. [   90.663720] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  414. [   90.663736] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  415. [   90.663779] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
  416. [   90.663788] sd 2:0:0:0: [sda] Write Protect is off
  417. [   90.663790] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  418. [   90.663805] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  419. [   90.663808]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
  420. [   90.693310]  sda1 sda2 sda3 sda4
  421. [   90.724005] sd 2:0:0:0: [sda] Attached SCSI disk
  422. [   90.728955] sd 2:0:0:0: Attached scsi generic sg0 type 0
  423. [   90.728974] sr 3:0:0:0: Attached scsi generic sg1 type 5
  424. [  120.715861] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  425. [  120.715875] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
  426. [  120.715877]          cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
  427. [  120.715879]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  428. [  120.715883] ata4.00: status: { DRDY }
  429. [  125.753758] ata4: port is slow to respond, please be patient (Status 0xd0)
  430. [  130.734701] ata4: device not ready (errno=-16), forcing hardreset
  431. [  130.734704] ata4: soft resetting link
  432. [  131.227706] ata4.00: configured for UDMA/25
  433. [  131.227715] ata4: EH complete
  434. [  161.214109] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  435. [  161.214120] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
  436. [  161.214122]          cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
  437. [  161.214123]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  438. [  161.214127] ata4.00: status: { DRDY }
  439. [  166.253012] ata4: port is slow to respond, please be patient (Status 0xd0)
  440. [  171.233960] ata4: device not ready (errno=-16), forcing hardreset
  441. [  171.233963] ata4: soft resetting link
  442. [  171.725951] ata4.00: configured for UDMA/25
  443. [  171.725957] ata4: EH complete
  444. [  201.713357] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  445. [  201.713364] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
  446. [  201.713365]          cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
  447. [  201.713366]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  448. [  201.713369] ata4.00: status: { DRDY }
  449. [  206.751279] ata4: port is slow to respond, please be patient (Status 0xd0)
  450. [  211.733219] ata4: device not ready (errno=-16), forcing hardreset
  451. [  211.733223] ata4: soft resetting link
  452. [  212.226230] ata4.00: configured for UDMA/25
  453. [  212.226240] ata4: EH complete
  454. [  242.212657] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  455. [  242.212719] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
  456. [  242.212721]          cdb 5a 00 2a 00 00 00 00 00  80 00 00 00 00 00 00 00
  457. [  242.212722]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  458. [  242.212776] ata4.00: status: { DRDY }
  459. [  247.250536] ata4: port is slow to respond, please be patient (Status 0xd0)
  460. [  252.232489] ata4: device not ready (errno=-16), forcing hardreset
  461. [  252.232492] ata4: soft resetting link
  462. [  252.724488] ata4.00: configured for UDMA/25
  463. [  252.724499] ata4: EH complete
  464. [  252.724503] sr0: scsi-1 drive
  465. [  252.724505] Uniform CD-ROM driver Revision: 3.20
  466. [  252.724555] sr 3:0:0:0: Attached scsi CD-ROM sr0
  467. [  252.802947] Attempting manual resume
  468. [  252.802950] swsusp: Resume From Partition 8:4
  469. [  252.802951] PM: Checking swsusp image.
  470. [  252.803265] PM: Resume from disk failed.
  471. [  252.835357] kjournald starting.  Commit interval 5 seconds
  472. [  252.835365] EXT3-fs: mounted filesystem with ordered data mode.
  473. [  259.522387] input: PC Speaker as /devices/platform/pcspkr/input/input2
  474. [  260.044402] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  475. [  260.074733] iTCO_vendor_support: vendor-support=0
  476. [  260.106343] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  477. [  260.142395] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
  478. [  260.202263] Linux agpgart interface v0.102
  479. [  260.286159] input: Power Button (FF) as /devices/virtual/input/input3
  480. [  260.349158] ACPI: Power Button (FF) [PWRF]
  481. [  260.349222] input: Power Button (CM) as /devices/virtual/input/input4
  482. [  260.413148] ACPI: Power Button (CM) [PWRB]
  483. [  260.417311] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
  484. [  260.480468] parport_pc 00:09: reported by Plug and Play ACPI
  485. [  260.480519] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  486. [  260.481725] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
  487. [  260.481757] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  488. [  260.951275] udev: renamed network interface eth0 to eth1
  489. [  261.278150] nvidia: module license 'NVIDIA' taints kernel.
  490. [  261.532248] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  491. [  261.532258] PCI: Setting latency timer of device 0000:01:00.0 to 64
  492. [  261.532405] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct  1 14:38:10 PDT 2008
  493. [  261.640827] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  494. [  261.640854] PCI: Setting latency timer of device 0000:00:1b.0 to 64
  495. [  261.675415] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
  496. [  262.238088] loop: module loaded
  497. [  262.258635] lp0: using parport0 (interrupt-driven).
  498. [  262.327032] Adding 2915788k swap on /dev/sda4.  Priority:-1 extents:1 across:2915788k
  499. [  262.618996] EXT3 FS on sda3, internal journal
  500. [  263.405276] ip_tables: (C) 2000-2006 Netfilter Core Team
  501. [  263.807538] No dock devices found.
  502. [  264.826532] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  503. [  264.826537] apm: disabled - APM is not SMP safe.
  504. [  264.927662] ppdev: user-space parallel port driver
  505. [  265.058995] audit(1226771744.878:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6875 profile="/usr/sbin/cupsd" namespace="default"
  506. [  265.827493] r8169: eth1: link up
  507. [  265.918465] Bluetooth: Core ver 2.11
  508. [  265.918663] NET: Registered protocol family 31
  509. [  265.918666] Bluetooth: HCI device and connection manager initialized
  510. [  265.918669] Bluetooth: HCI socket layer initialized
  511. [  265.961397] Bluetooth: L2CAP ver 2.9
  512. [  265.961402] Bluetooth: L2CAP socket layer initialized
  513. [  266.018520] Bluetooth: RFCOMM socket layer initialized
  514. [  266.018533] Bluetooth: RFCOMM TTY layer initialized
  515. [  266.018534] Bluetooth: RFCOMM ver 1.8
  516. [  270.060885] NET: Registered protocol family 17
  517. [  274.818842] NET: Registered protocol family 10
  518. [  274.819078] lo: Disabled Privacy Extensions
  519. [  285.662657] eth1: no IPv6 routers present
复制代码

看在我们都使用Linux的份上，请各位高手指教一下。
PS：其实我也想转到Arch。

本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有帐号？注册

x
回复

使用道具 举报

发表于 2008-11-16 02:51:14 | 显示全部楼层
虽然你打算用arch，不过ubuntu的问题最好还是到ubuntu论坛去问吧，我们连ubuntu用的是什么内核都不知道，怎么帮你？等你用arch遇到问题的时候再来问好了。
回复 支持 反对

使用道具 举报

发表于 2008-11-16 09:19:26 | 显示全部楼层
确实是没有遇到过的情况，还是google搜索比较快
回复 支持 反对

使用道具 举报

huntxu
发表于 2008-11-16 17:30:28 | 显示全部楼层
硬盘坏了吧....
回复 支持 反对

使用道具 举报

sinec
发表于 2008-11-17 16:21:06 | 显示全部楼层
感觉是acpi这儿有问题，我之前也是用ubuntu，解决不了acpi，转到arch后电源管理上面就好了。
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表