老大进来帮我看看我的XF86Config文件？

tahaomei · 发表于 2003-5-22 10:28:38

我装了FREEBSD4.8 N 次了，一直没把X WINDOWS搞定。
我的显卡为geforce2 mx 400，显示器为lg 775ft
用STARTX进不了X WINDOWS，怎么回事呢？

Section "ServerLayout"
Identifier    "XFree86 Configured"
Screen    0  "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath    "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath    "/usr/X11R6/lib/X11/fonts/misc/"
FontPath    "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath    "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load  "dbe"
Load  "dri"
Load  "extmod"
Load  "glx"
Load  "record"
Load  "xtrap"
Load  "speedo"
Load  "type1"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver    "keyboard"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "

rotocol" "auto"
Option       "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
# DisplaySize    310 230 # mm
Identifier "Monitor0"
VendorName "GSM"
ModelName "FLATRON 775FT"
      HorizSync 30.0-70.0
      VertRefresh  50.0-160.0
Option       "DPMS"
EndSection

Section "Device"
      ### Available Driver options are:-
      ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
      ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
      ### [arg]: arg optional
      #Option    "SWcursor"            # [<bool>]
      #Option    "HWcursor"            # [<bool>]
      #Option    "NoAccel"             # [<bool>]
      #Option    "ShowCache"       # [<bool>]
      #Option    "ShadowFB"            # [<bool>]
      #Option    "UseFBDev"            # [<bool>]
      #Option    "Rotate"          # [<str>]
      #Option    "VideoKey"            # <i>
      #Option    "FlatPanel"       # [<bool>]
      #Option    "FPDither"            # [<bool>]
      #Option    "CrtcNumber"          # <i>
Identifier  "Card0"
Driver    "nv"
VendorName  "nVidia Corporation"
BoardName "NV11 [GeForce2 MX/MX 400]"
BusID    "

CI:1:0:0"
      VideoRam 65536
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Card0"
Monitor "Monitor0"
      DefaultColorDepth 24
# SubSection "Display"
#    Depth    1
# EndSubSection
# SubSection "Display"
# Depth    4
# EndSubSection
# SubSection "Display"
# Depth    8
# EndSubSection
# SubSection "Display"
# Depth    15
# EndSubSection
# SubSection "Display"
# Depth    16
# EndSubSection
SubSection "Display"
Depth    24
            Modes "1024*768" "800*600" "640*480"
EndSubSection
EndSection

nicosoft · 发表于 2003-5-22 16:37:19

/stand/sysinstall
config->xfree86
然后在里面跟着提示做不行么？
他有什么错误的提示啊？

tahaomei · 发表于 2003-5-22 17:10:43

你说的是图形配置吗？
我老是失败，但是能进去X WINDOWS里，可是里面什么东西都没有啊。看不到KDE，就一个X的鼠标图标
后来，我就配置XF86Config了，文件贴在上面了
结果连X WINDOWS都进不了了

dato · 发表于 2003-5-22 18:33:42

为什么你玩电脑一点直觉都没有呢，不适合做电脑玩家哦
再说一次，懒汉的方法。我也是gef2 MX400
运行/stand/sysinstall
用图形方式先配置X，(这一步会提醒你X配置失败，不管选择no)然后
cp /usr/X11R6/lib/X11/XF86Config /etc/X11
但是这个配置文件不能进入X。我不知道为什么懒得了解那些
接着用文本方式配置X，text mode
会自动修改一些配置，在最后会看到让你选择/etc/X11/XF86Config
反正保存就OK，startx

tahaomei · 发表于 2003-5-22 18:49:37

我是想了解为什么这样做嘛，只知其然不知其所以然，不好

		自动登录	找回密码
密码			注册