NVIDIA显卡驱动需要详细帮助，借我一双慧眼！！！

fiddle

0. 小弟显卡是NVIDIA RIVA TNT2 M64，诸位不要笑
1. 首先在涉及到我的具体问题之前想问问，当用xorgconfig设置的时候，选择了card database中的RIVA TNT2，系统自动为我选择了驱动为nv，通过man nv得知，默认这个nv是支持2D加速的，那么如果使用这个nv，不使用NVIDIA官方驱动，是否也可以让MPlayer 全屏幕播放？打游戏呢？
2. 搜索了关于NVIDIA驱动的帖子，好多~~~~~~但我还是遇到了问题：
为了支持我的老显卡，我没有下载最新版的NVIDIA驱动，而是使用了NVIDIA-Linux-x86-1.0-6629-pkg1.run，安装用的是sh NVIDIA-Linux-x86-1.0-6629-pkg1.run直接安装，其中提示与rivafb可能产生冲突，然后继续安装，提示成功了，然后修改nv为nvdia，启动startx，黑屏：（，键盘无响应，只有按Reset键重启。
我的xorg.conf如下：
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"          # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath        "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "rotocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option        "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"        "xorg"
    Option "XkbModel"        "pc105"
    Option "XkbLayout"        "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver        "mouse"
    Option "rotocol"    "IMPS/2"
    Option "Device"      "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "rotocol"        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"        "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "rotocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30-70

#    HorizSync        30-64         # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-160

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier        "Standard VGA"
    VendorName        "Unknown"
    BoardName        "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset        "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "CI:0:10:0"

#    VideoRam        256

#    Clocks        25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "RIVA TNT2"
    Driver      "nv"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "RIVA TNT2"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

fiddle

上面驱动我已经改成nv，这才能进KDE发帖子的：（
还有log文件：/var/log/Xorg.0.log

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/fiddle:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.4.31 i686 [ELF]
Current Operating System: Linux fiddle 2.4.31 #6 Sun Jun 5 19:04:47 PDT 2005 i686
Build Date: 12 July 2005
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  6 02:36:01 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "RIVA TNT2"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
        Entry deleted from font path.
        (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".
        Entry deleted from font path.
        (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.7
        X.Org XInput driver : 0.4
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 1106,4511 rev 20 class 04,01,00 hdr 00
(II) PCI: 00:09:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 1569,002d rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0xda000000 - 0xdbffffff (0x2000000) MX
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:7:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus -1 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
(II) Bus -1 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] rev 21, Mem @ 0xda000000/24, 0xd8000000/25
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
        [0] -1        0        0xdd000000 - 0xdd0000ff (0x100) MX
        [1] -1        0        0xd0000000 - 0xcfffffff (0x0) MXO
        [2] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX(B)
        [3] -1        0        0xda000000 - 0xdaffffff (0x1000000) MX(B)
        [4] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX
        [5] -1        0        0x0000e400 - 0x0000e403 (0x4) IX
        [6] -1        0        0x0000e000 - 0x0000e003 (0x4) IX
        [7] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX
        [8] -1        0        0x0000d800 - 0x0000d81f (0x20) IX
        [9] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [10] -1        0        0x0000d000 - 0x0000d00f (0x10) IX
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0xdd000000 - 0xdd0000ff (0x100) MX
        [1] -1        0        0xd0000000 - 0xcfffffff (0x0) MXO
        [2] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX(B)
        [3] -1        0        0xda000000 - 0xdaffffff (0x1000000) MX(B)
        [4] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX
        [5] -1        0        0x0000e400 - 0x0000e403 (0x4) IX
        [6] -1        0        0x0000e000 - 0x0000e003 (0x4) IX
        [7] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX
        [8] -1        0        0x0000d800 - 0x0000d81f (0x20) IX
        [9] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [10] -1        0        0x0000d000 - 0x0000d00f (0x10) IX
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0xdd000000 - 0xdd0000ff (0x100) MX
        [6] -1        0        0xd0000000 - 0xcfffffff (0x0) MXO
        [7] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX(B)
        [8] -1        0        0xda000000 - 0xdaffffff (0x1000000) MX(B)
        [9] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [10] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [11] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX
        [12] -1        0        0x0000e400 - 0x0000e403 (0x4) IX
        [13] -1        0        0x0000e000 - 0x0000e003 (0x4) IX
        [14] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX
        [15] -1        0        0x0000d800 - 0x0000d81f (0x20) IX
        [16] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [17] -1        0        0x0000d000 - 0x0000d00f (0x10) IX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 6.8.2, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.6629
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
        Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
        Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
        GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
        GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
        Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
        GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
        GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
        GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
        GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
        GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
        GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
        Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
        GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
        GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
        0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
        Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
        GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
        Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
        GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
        GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
        0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
        Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
        GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
        GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
        GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
        Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
        GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
        GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
        GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
        GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
        GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
        Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
        GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
        Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
        0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
        0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
        GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
        0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
        0x0211, 0x021D, 0x021E
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset RIVA TNT2 Model 64 found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0xdd000000 - 0xdd0000ff (0x100) MX
        [6] -1        0        0xd0000000 - 0xcfffffff (0x0) MXO
        [7] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX(B)
        [8] -1        0        0xda000000 - 0xdaffffff (0x1000000) MX(B)
        [9] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [10] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [11] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX
        [12] -1        0        0x0000e400 - 0x0000e403 (0x4) IX
        [13] -1        0        0x0000e000 - 0x0000e003 (0x4) IX
        [14] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX
        [15] -1        0        0x0000d800 - 0x0000d81f (0x20) IX
        [16] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [17] -1        0        0x0000d000 - 0x0000d00f (0x10) IX
(II) resource ranges after probing:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0xdd000000 - 0xdd0000ff (0x100) MX
        [6] -1        0        0xd0000000 - 0xcfffffff (0x0) MXO
        [7] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX(B)
        [8] -1        0        0xda000000 - 0xdaffffff (0x1000000) MX(B)
        [9] 0        0        0x000a0000 - 0x000affff (0x10000) MS
        [10] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS
        [11] 0        0        0x000b8000 - 0x000bffff (0x8000) MS
        [12] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [13] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [14] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX
        [15] -1        0        0x0000e400 - 0x0000e403 (0x4) IX
        [16] -1        0        0x0000e000 - 0x0000e003 (0x4) IX
        [17] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX
        [18] -1        0        0x0000d800 - 0x0000d81f (0x20) IX
        [19] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [20] -1        0        0x0000d000 - 0x0000d00f (0x10) IX
        [21] 0        0        0x000003b0 - 0x000003bb (0xc) IS
        [22] 0        0        0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "RIVA TNT2 Model 64"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD8000000
(--) NV(0): MMIO registers at 0xDA000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.2.0
        ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM  Model: 42d1  Serial#: 0
(II) NV(0): Year: 2001  Week: 0
(II) NV(0): EDID Version: 1.1
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync:  Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 31  vert.: 23
(II) NV(0): Gamma: 2.85
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/color Display
(II) NV(0): redX: 0.631 redY: 0.328   greenX: 0.295 greenY: 0.600
(II) NV(0): blueX: 0.144 blueY: 0.070   whiteX: 0.282 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 720x400@88Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@87Hz (interlaced)
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) NV(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) NV(0): #2: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) NV(0): #3: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) NV(0): #4: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) NV(0): #5: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) NV(0): #6: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): #7: hsize: 832  vsize 624  refresh: 75  vid: 20297
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 36.0 MHz   Image Size:  310 x 230 mm
(II) NV(0): h_active: 640  h_sync: 696  h_sync_end 752 h_blank_end 832 h_border: 0
(II) NV(0): v_active: 480  v_sync: 481  v_sync_end 484 v_blanking: 509 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz   Image Size:  310 x 230 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 70 kHz, PixClock max 110 MHz
(II) NV(0): Monitor name: FLATRON 775FT
(II) NV(0): Number of EDID sections to follow: 10
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): My Monitor: Using hsync range of 30.00-70.00 kHz
(II) NV(0): My Monitor: Using vrefresh range of 50.00-160.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(WW) (1400x1050,My Monitor) mode clock 122MHz exceeds DDC maximum 110MHz
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width requires unsupported line pitch)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) NV(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432"   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) NV(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) NV(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(--) NV(0): Display dimensions: (310, 230) mm
(--) NV(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.2.0
        ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0        0        0xd8000000 - 0xd9ffffff (0x2000000) MX
        [1] 0        0        0xda000000 - 0xdaffffff (0x1000000) MX
        [2] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [3] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [4] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [5] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [6] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [7] -1        0        0xdd000000 - 0xdd0000ff (0x100) MX
        [8] -1        0        0xd0000000 - 0xcfffffff (0x0) MXO
        [9] -1        0        0xd8000000 - 0xd9ffffff (0x2000000) MX(B)
        [10] -1        0        0xda000000 - 0xdaffffff (0x1000000) MX(B)
        [11] 0        0        0x000a0000 - 0x000affff (0x10000) MS(OprD)
        [12] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
        [13] 0        0        0x000b8000 - 0x000bffff (0x8000) MS(OprD)
        [14] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [15] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [16] -1        0        0x0000e800 - 0x0000e8ff (0x100) IX
        [17] -1        0        0x0000e400 - 0x0000e403 (0x4) IX
        [18] -1        0        0x0000e000 - 0x0000e003 (0x4) IX
        [19] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX
        [20] -1        0        0x0000d800 - 0x0000d81f (0x20) IX
        [21] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [22] -1        0        0x0000d000 - 0x0000d00f (0x10) IX
        [23] 0        0        0x000003b0 - 0x000003bb (0xc) IS(OprU)
        [24] 0        0        0x000003c0 - 0x000003df (0x20) IS(OprU)
(==) NV(0): Write-combining range (0xd8000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
(**) Option "rotocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "rotocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
SetClientVersion: 0 8

fiddle

lsmod查看发现nvidia已经加载：
root@fiddle:~# lsmod
Module                  Size  Used by    Tainted: P
snd-pcm-oss            36736   0
snd-mixer-oss          12376   1  [snd-pcm-oss]
parport_pc             15044   0
parport                22824   0  [parport_pc]
uhci                   24284   0  (unused)
usbcore                59148   1  [uhci]
snd-via82xx            13376   2
gameport                1420   0  [snd-via82xx]
snd-ac97-codec         58556   0  [snd-via82xx]
snd-pcm                54344   0  [snd-pcm-oss snd-via82xx snd-ac97-codec]
snd-timer              13764   0  [snd-pcm]
snd-mpu401-uart         3136   0  [snd-via82xx]
snd-rawmidi            12480   0  [snd-mpu401-uart]
snd-seq-device          3812   0  [snd-rawmidi]
snd                    32772   1  [snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
snd-page-alloc          4712   0  [snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-rawmidi snd-seq-device snd]
soundcore               3396   3  [snd]
8139too                13928   1
mii                     2272   0  [8139too]
crc32                   2880   0  [8139too]
nvidia               3205624   0  (unused)
nls_cp936             119936   1  (autoclean)
nls_gb2312               448   3  (autoclean)
ide-scsi                9392   0
agpgart                45508   0  (unused)

fiddle

各位老大，请张开你们的慧眼，帮小弟看看怎么回事？那个rivafb好象没有加载亚？为何会黑屏呢？我改怎么做呢？

zonzi

还需要些信息,比如内核是不是你自己编译的,用的是哪个内核,用哪个版本的slackware.................
rivafb用lsmod看不出的原因可能是编译在内核里,而没有编译成模块
基本肯定是内核的问题,那些fb什么的垃圾一堆,slackware默认的好像从来不支持的

北南南北

感觉好象用的是root用户登入的桌面吧。

改回到nvidia ，添加一个普通用户，用普通用户登录看看？

fiddle

Post by 北南南北
感觉好象用的是root用户登入的桌面吧。

改回到nvidia ，添加一个普通用户，用普通用户登录看看？

小声问一下，这个和用户有关系么？怎么解释呢？谢谢

我的内核是这样，不是自己编译的，安装了Slackware10.1，然后用swaret升级内核到2.4.31，/usr/src下有完整的Kernel source和正确的链接。

troll

1. (EE) Failed to initialize GLX extension (NVIDIA X driver not found)

复制代码

虽然内核有rivafb模块，但没有加载是不会冲突的，不知问题到底在哪里。

windrose

试试更早一些的nvidia驱动

北南南北

Post by fiddle
小声问一下，这个和用户有关系么？怎么解释呢？谢谢

我的内核是这样，不是自己编译的，安装了Slackware10.1，然后用swaret升级内核到2.4.31，/usr/src下有完整的Kernel source和正确的链接。

经过我本人以及有个弟兄悄悄话反馈，root用户就是在不安装驱动的情况下也会出现黑屏情况。

目前我的root用户，进去就是黑屏，百思不得其解。。