分辨率太高，显示器启动不了 ！

salty

请问我安装了suse，配置选默认的分辨率，但是现在启动不了了，分辨率太高，启动不了，只看见好像显示器没有信号输入
init 5
startx
xconfig
xf86config
sax2
都不行！
请问有什么命令在黑屏下面配置分辨率？

比如在magiclinux下面的xconfig。

salty

请大家帮我求求

outthemirror

进入控制台，yast,然后重新探测硬件，如果不行手动设置，reboot，就ok了。

salty

谢谢～我试一下！

salty

还是不幸！
换了显示器显示“超出工作平率”!

危险啊！会烧化我得显像管的！

yast

还是图形配置，选择“change”的时候就会进到目前的刷新率，还是直接按重启！

ata

显示器有没说提示超多少?ctrl+alt+F1换到字符界面.vi /etc/X11/xorg.conf
把刷新率降下来保存然后ctrl+退格重启X就可以了

Post by salty
还是不幸！
换了显示器显示“超出工作平率”!

危险啊！会烧化我得显像管的！

yast

还是图形配置，选择“change”的时候就会进到目前的刷新率，还是直接按重启！

salty

# /.../
# SaX generated X11 config file
# Created on: 2005-10-11T07:17:08+0800.
#
# Version: 4.8
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [SaX2] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "rotocol" "Standard"
  Option       "XkbLayout" "us"
  Option       "XkbModel" "pc104"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "5"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "ImPS/2 Generic Wheel Mouse"
  Option       "rotocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  DisplaySize  310 230
  HorizSync    31-48
  Identifier   "Monitor[0]"
  ModelName    "SYNCMASTER 4S"
  Option       "DPMS"
  VendorName   "SAMSUNG"
  VertRefresh  43-75
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
  Modeline         "1280x1024" 77.62 1280 1344 1480 1680 1024 1025 1028 1050
  Modeline         "1152x864" 69.61 1152 1208 1328 1504 864 865 868 890
  Modeline         "1024x768" 63.04 1024 1080 1184 1344 768 769 772 795
  Modeline         "800x600" 47.53 800 840 920 1040 600 601 604 626
  Modeline         "640x480" 29.84 640 664 728 816 480 481 484 501
EndSection


Section "Device"
  BoardName    "GeForce4 MX 440 with AGP8X"
  BusID        "1:0:0"
  Driver       "nv"
  Identifier   "Device[0]"
  VendorName   "NVidia"
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection

salty

帮人帮到底，您说是要改那里？

ata

VertRefresh 后面的75再稍降一点点，72试试，我的就是这样

salty

VertRefresh是什么意思？

我只想要显示器支持~
30~85hz
50~160hz