关于摄像头

coolone

我装了一个摄像头的driver,装好了以后，摄像头的灯是亮了，然后我就打开camorama测试，但是他直接打开了我的电视卡，没有打开webcam..
我看了一下，好像没没创建 Device 只是 注册了。请问如何解决？
比如，我modprobe TV card 会有
Dec 30 14:51:48 localhost saa7133[0]: i2c scan: found device @ 0x96  [???]
Dec 30 14:51:48 localhost saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
Dec 30 14:51:51 localhost saa7133[0]: registered device video1 [v4l2]
Dec 30 14:51:51 localhost saa7133[0]: registered device vbi0
Dec 30 14:51:51 localhost saa7133[0]: registered device radio0




感谢


var/log/message:

Dec 30 14:40:57 localhost usbcore: deregistering driver spca5xx
Dec 30 14:40:57 localhost ohci_hcd 0000:00:02.0: leak ed ffff81007ffea190 (#81) state 2
Dec 30 14:40:57 localhost /var/tmp/portage/media-video/spca5xx-20060501-r2/work/spca5xx-20060501/drivers/usb/spca5xx.c: driver spca5xx deregistered
Dec 30 14:41:12 localhost /var/tmp/portage/media-video/spca5xx-20060501-r2/work/spca5xx-20060501/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
Dec 30 14:41:12 localhost /var/tmp/portage/media-video/spca5xx-20060501-r2/work/spca5xx-20060501/drivers/usb/spca5xx.c: [spca5xx_probe:5492] Camera type JPEG
Dec 30 14:41:12 localhost /var/tmp/portage/media-video/spca5xx-20060501-r2/work/spca5xx-20060501/drivers/usb/zc3xx.h: [zc3xx_config:492] Find Sensor HV7131B
Dec 30 14:41:12 localhost /var/tmp/portage/media-video/spca5xx-20060501-r2/work/spca5xx-20060501/drivers/usb/spca5xx.c: [spca5xx_getcapability:1768] maxw 640 maxh 480 minw 176 minh 144
Dec 30 14:41:12 localhost usbcore: registered new driver spca5xx
Dec 30 14:41:12 localhost /var/tmp/portage/media-video/spca5xx-20060501-r2/work/spca5xx-20060501/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered