LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1380|回复: 8

我的modem是什么型号的?(内有scanmodem的结果)

[复制链接]
发表于 2003-8-1 10:54:53 | 显示全部楼层 |阅读模式
我在linmodems.org下载到了和我内核一致的猫的驱动(rpm包),我用的是redhat 9.0

但是在我装完rpm包后,打开kppp还是不能检测到猫 , 怎么办,我都要风了
发表于 2003-8-1 11:05:53 | 显示全部楼层
别急,慢慢来,
在kppp配置里找到,查询调制解调器,看有什么结果
在京华区页有相应的大案
 楼主| 发表于 2003-8-1 12:16:49 | 显示全部楼层
kppp 显示不能打开modem
发表于 2003-8-1 12:52:07 | 显示全部楼层
那还是驱动安装不正确,系统不能正确认出modem的芯片。
 楼主| 发表于 2003-8-1 20:23:31 | 显示全部楼层

lucent modem 安装问题,

我安装的是ltmodem-kv_2_4_20_8-8_26a9-1_i686.rpm这个包,
用的事redhat9.0
在安装的时候,先是如下错误,再kppp里无法打开modem


Your system is lacking Default lines in /etc/modules.conf
which are usually needed to support the modem communications protocol PPP.
Some modem installations replace these Defaults
    with lines specific to particular modem hardware.
There may be problems using the Lucent/Agere modem without these Default lines.


The following information blocks just query some ppp support items.
====================================================================
   grep ppp /etc/modules.conf
--------------------------------
--------------------------------
DEVPPP=crw------- 1 root root 108, 0 2003-01-30 /dev/ppp
DEVFS=
DEVFSD=


///////////////下边是安装的log和我的modules.conf文件














If you cannot resolve the problems, please send /usr/share/doc/ltmodem-kv_2.4.20_8-8.26a9/LTinstall.txt to discuss@linmodems.org with Subject: LTinstallRPM
RECORD=/usr/share/doc/ltmodem-kv_2.4.20_8-8.26a9/LTinstall.txt
Linux localhost.localdomain 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
PWD=/
ENVIR=rpm
INSTALLER=/var/tmp/rpm-tmp.81790 1   
TMPM=/tmp/ltmodem/tmpfile
FAST=1
LT_VERSION=8.26a9
TARGET_VERSION=2.4.20-8
TARGET_CPU=i686
SYSTEM_CPU=i686
GCC_DRIVERS=3
GCC_NOW=3.2.2
GCC_KERNEL=3

------------ beginning SCANMODEM section ------
If further help is needed, send a description of your problem to:         discuss@linmodems.org
   with this ModemData.txt Attached.
using the following in the email Subject Line:
        scanmodem, redhat kernel 2.4.20-8

System info follows
==================================================
redhat Red Hat Linux release 9 (Shrike)
Script executed as:        scanmodem
on system:        Linux localhost.localdomain 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
LSPCI=/sbin/lspci
UPDATE=2002 Nov 13

--------- lspci scan ----------------
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:04.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 02)
00:06.0 Communication controller: Lucent Microelectronics LT WinModem
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6832/6833 Cardbus Controller (rev 34)
00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6832/6833 Cardbus Controller (rev 34)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
-------------------------------------
Reading more detail for the Device at:
PCI bus
-------
00:06.0 Class 0780: 11c1:0450
          Subsystem 1509:1374
00:06.0 Communication controller: Lucent Microelectronics LT WinModem
        Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1374
        Flags: medium devsel
        Memory at fc000000 (32-bit, non-prefetchable) [disabled] [size=256]
        I/O ports at 10c8 [disabled]
        I/O ports at 1400 [disabled] [size=256]
        Capabilities: [f8] Power Management version 2

-------------------------------------------------------
11c1:0450  PCI bus PCI_ID with vendor component: 11c1
1509:1374  and Subsystem PCI_ID with vendor:     1509
-------------------------------------------------------
are key Sought Descriptions of your modem firmware.
Have them ready when visiting URLs with service software!!
For soft modems in AC'97 controller slots, the bus PCI_ID describes the Controller
and the Subsystem PCI_ID the modem card inserted into it.  A soft modem chipset
must be determined (guessed ?) to guide the choice of driver resources.

It may be useful to download  http://www.yourvote.com/pci/vendors.txt
and search it for vendor with and without caps, for example:  both  114d  and  114D
------------------------------------------------------------------------------------

                Interrupt: pin A routed to IRQ 0
The interrupt assignment:         IRQ 0         
predicts that modem function will fail.
Possible corrections are:
   1) to access the  the boot up BIOS change to a non-PNP mode.  
   Instructions for accessing BIOS are at:  
      http://linmodems.technion.ac.il/resources.html within:  Additional Resourcces.  
   2) Within some BIOS setups, IRQ assignments can be changed.
   3) On non-laptop systems moving the modem card to another slot has helped.
   4) Sometimes upgrading the kernel restores a non 0 IRQ .

DSP=1

A supported Lucent/Agere DSP chipset modem is identified:  PCI_ID=11c1:0450
    VENDOR 0x11c1         DEVICE 0x0450
ID are within the serviced ranges for Lucent/Agere DSP modems:
   ------------------------------------------
    LUCENT 0x11c1          0x0440-0x045c
    XIRCOM 0x115d          0x0000-0x000F
    XIRCOM 0x115d          0x0440-0x045c
    XIRCOM 0x115d          0x0010-0x03ff
  -------------------------------------------
Drivers and their compiler kits are available at:
       http://www.heby.de/ltmodem/
  
        Checking primary Vendor=11c1 through major modem chipset Vendors

Vendor=11c1 corresponds to Lucent Technologies or subsidiary Agere Systems, Inc.
Information is at:  http://www.agere.com/support/client/modem_drivers.html
   but without any relevant to Linux.

        Checking Subsystem Vendor=1509 through major modem chipset Vendors

0x0450 -- Mars 3 Mercury data fax Global board
Get Lucent/Agere information at:
        http://www.agere.com/support/client/modem_drivers.html

  The desired installer name is like:
========================================
ltmodem-kv-2.4.20_8-8.22a5-1.i686.rpm
----------------------------------------
ltmodem-kv-Kernel_FL-LTver--.CPU.rpm   explains the versioning.
LTver 8.22a5  is the release of the resource
used in compiling and assembling driver packages.
8.22 is the Agere core code designation.

A suitable installer is not available as of this 2002 Nov 13 update.
Check in the section redhat at  http://www.heby.de/ltmodem
for a subsequent Installer submission.
If not present use the ltmodem-8.22a5.tar.gz compiler kit.

The list of available Installers for redhat
is inserted into to /usr/share/doc/ltmodem-kv_2.4.20_8-8.26a9/LTinstall.txt.2
GCCversion=3.2.2

The following information blocks just query some ppp support items.
====================================================================
   grep ppp /etc/modules.conf
--------------------------------
--------------------------------
DEVPPP=crw------- 1 root root 108, 0 2003-01-30 /dev/ppp
DEVFS=
DEVFSD=

-------------- ending SCANMODEM section ----------------
DEVFS=
DEV_MODEM_LINK_ORIG=
   DEVICE_NODE=/dev/ttyLT0
SYM_LINK1=/dev/modem
With permissions to group: dialout

MCFILE=/etc/modules.conf

UPDATE_MOD=/sbin/depmod -a

Your system is lacking Default lines in /etc/modules.conf
which are usually needed to support the modem communications protocol PPP.
Some modem installations replace these Defaults
    with lines specific to particular modem hardware.
There may be problems using the Lucent/Agere modem without these Default lines.
The suspect lines are:
------------------------------
  cat /tmp/ltmodem/tmpfile
------------------------------
and are being inserted in /usr/share/doc/ltmodem-kv_2.4.20_8-8.26a9/LTinstall.txt for your judgement.
Should you insert them in /etc/modules.conf, inform the System with
   /sbin/depmod -a
   
DEPMOD_A=passed
The following block has been written to /etc/modules.conf:
/etc/modules.conf
# lt_drivers: autoloading and insertion parameter usage
alias char-major-62 lt_serial
alias /dev/tts/LT0 lt_serial
alias /dev/modem lt_serial
# The next two lines are syntax examples, only Rarely Needed, to automate parameter usage during lt_drivers insertion. See documentation for details.
# options lt_modem vendor_id=0x115d device_id=0x0420
# options lt_modem Forced=3,0x130,0x2f8,0
# section for lt_drivers ends


Please browse /usr/share/doc/ltmodem-kv_2.4.20_8-8.26a9 to benefit from DOCs/ and utils/ therein.

red














//////////////modules.conf文件

alias sound-slot-0 esssolo1
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller usb-uhci
alias eth0 8139too

# lt_drivers: autoloading and insertion parameter usage
alias char-major-62 lt_serial
alias /dev/tts/LT0 lt_serial
alias /dev/modem lt_serial
# The next two lines are syntax examples, only Rarely Needed, to automate parameter usage during lt_drivers insertion. See documentation for details.
# options lt_modem vendor_id=0x115d device_id=0x0420
# options lt_modem Forced=3,0x130,0x2f8,0
# section for lt_drivers ends
发表于 2003-8-2 14:51:45 | 显示全部楼层
对不起,我也不太清楚,帮不上你什么忙,不过你可以给discuss@linmodems.org写信啊,一般都会得到作者全力帮助的。

你把/usr/share/doc/ltmodem-kv_2.4.20_8-8.26a9/LTinstall.txt这个文件发给他,再把你的问题说一下,外语不用太好,只要说个大概意思就行了。我的adsl usb modem就是这样解决的。
 楼主| 发表于 2003-8-5 21:27:31 | 显示全部楼层

我的modem是什么型号的?(内有scanmodem的结果)

The most recent update of scanmodem accessed at http://linmodems.technion.ac.il/packages/scanModem.gz
should ALWAYS be used before requesting help from discuss@linmodem.org,
URLs to cogent advice are regularly entered and updated, and your problem may be solved therein.
If further help is needed, send a description of your problem to:  discuss@linmodems.org
with this ModemData.txt Attached, using the following in the email Subject Line:
      SUBJECT="scanModem, redhat kernel 2.4.20-8

--------------  System information ------------------------
redhat Red Hat Linux release 9 (Shrike)
on system: Linux C4 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux"
GCC=3.2.2
UPDATE=2003 July 31

An AC'97 modem codec was not detected

Path to lspci is: /sbin/lspci
--------- lspci scan ----------------
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01)
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
01:09.0 Communication controller: Tiger Jet Network Inc. Intel 537
01:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
-------------------------------------
Reading more detail for the Device at:
PCI bus
-------
01:09.0 Class 0780: e159:0001
          Subsystem 8086:0003
01:09.0 Communication controller: Tiger Jet Network Inc. Intel 537
        Subsystem: Intel Corp.: Unknown device 0003
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c000 [size=256]
        Memory at ec000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

-------------------------------------------------------
e159:0001  PCI_ID of the PCI bus with vendor: e159
8086:0003  PCI_ID of Subsystem with vendor:   8086
-------------------------------------------------------
are key Sought Descriptions of your modem firmware.
Have them ready when visiting URLs with service software!!


    e159:0001                   TigerJet 320            
    e159:0001  0359:0003        TJ320 v3.1              
    e159:0001  8086:0003        TJ320 v2.0
=== Checking e159 through chipset providers and modem assemblers ====

Vendor=8086 is Intel, Inc. producing HaM and 536ep host controller free (HCF) modems, the 537 soft modem
and AC'97 and MC97 controllers managing a varierty of non-Intel soft modem subSystems. These subSystems
will in general not have Intel PCI_IDs.

Download drivers from:  http://developer.intel.com/design/modems/support/drivers.htm
Also check at: http://linmodems.technion.ac.il/resources.html
for early releases and perhaps already compiled drivers.


Formal support for Intel 537 chipset soft modems
is expected by the Fall of 2003, available then at
   http://developer.intel.com/desig ... t/drivers_linux.htm
   and perhaps a bit earlier in the Intel section of:
     http://linmodems.technion.ac.il/resources.html
The Intel 537 chipsets are sold to a variety of modem assemblers
that specify there own PCI_IDs.
Some are supported by SmartLink drivers.

END   
    fi
    if [ "e159" = "1813" ] ; then
      cat<<END>>/tmp/modem/ModemData.txt

Vendor=1813 Ambient Tech was acquired by Intel with its HaM (Host assisted Modem) chipsets.
With exception of those with PCI_ID 1813:4100 modems, see message:
     http://linmodems.org/cgi-bin/ezm ... bhcoigfcimgkjdedjad
all the HaM modems have been supported.
HOWEVER, further maintainence is being discontinued, in favor of the newer Intel 536ep and 537 soft modems.
Thus HaM failures can be expected for the emerging 2.6.nn kernels,
and perhaps soon after 2.4.21 because of changes in the serial interface.


The soft modem         Subsystem: 8086:0003
serving under the controller:
   PCI_ID=e159:0001, Communication controller: Tiger Jet Network Inc. Intel 537
may be supported by the SmartLink slmdm-2.7.10 drivers.
For versions after 2.7.10 the drivers may load, but there will be a failure to dial correctly!!
See the related supoort table listing in /tmp/modem/ModemData.txt.2


Vendor 163c is SmartLink,  http://www.smlink.com/ with EXCELLENT Linux support!
Downloads from ftp://ftp.smlink.com/linux/unsupported/  with some backups at:
    http://linmodems.technion.ac.il/packages/smartlink/

=== Checking 8086 through chipset providers and modem assemblers ====

Vendor=8086 is Intel, Inc. producing HaM and 536ep host controller free (HCF) modems, the 537 soft modem
and AC'97 and MC97 controllers managing a varierty of non-Intel soft modem subSystems. These subSystems
will in general not have Intel PCI_IDs.

Download drivers from:  http://developer.intel.com/design/modems/support/drivers.htm
Also check at: http://linmodems.technion.ac.il/resources.html
for early releases and perhaps already compiled drivers.


Formal support for Intel 537 chipset soft modems
is expected by the Fall of 2003, available then at
   http://developer.intel.com/desig ... t/drivers_linux.htm
   and perhaps a bit earlier in the Intel section of:
     http://linmodems.technion.ac.il/resources.html
The Intel 537 chipsets are sold to a variety of modem assemblers
that specify there own PCI_IDs.
Some are supported by SmartLink drivers.

END   
    fi
    if [ "8086" = "1813" ] ; then
      cat<<END>>/tmp/modem/ModemData.txt

Vendor=1813 Ambient Tech was acquired by Intel with its HaM (Host assisted Modem) chipsets.
With exception of those with PCI_ID 1813:4100 modems, see message:
     http://linmodems.org/cgi-bin/ezm ... bhcoigfcimgkjdedjad
all the HaM modems have been supported.
HOWEVER, further maintainence is being discontinued, in favor of the newer Intel 536ep and 537 soft modems.
Thus HaM failures can be expected for the emerging 2.6.nn kernels,
and perhaps soon after 2.4.21 because of changes in the serial interface.


The soft modem         Subsystem: 8086:0003
serving under the controller:
   PCI_ID=e159:0001, Communication controller: Tiger Jet Network Inc. Intel 537
may be supported by the SmartLink slmdm-2.7.10 drivers.
For versions after 2.7.10 the drivers may load, but there will be a failure to dial correctly!!
See the related supoort table listing in /tmp/modem/ModemData.txt.2


Vendor 163c is SmartLink,  http://www.smlink.com/ with EXCELLENT Linux support!
Downloads from ftp://ftp.smlink.com/linux/unsupported/  with some backups at:
    http://linmodems.technion.ac.il/packages/smartlink/


====== PCI_ID scanning for Vendors and SubVendors completed ======

GCCversion=3.2.2

The following information blocks just query some ppp support items.
====================================================================
   grep ppp /etc/modules.conf
--------------------------------
--------------------------------
Be sure to read the section about ppp related modules and aliases in /tmp/modem/ModemData.txt.2
=== ifconfig test ====
eth0      Link encap:Ethernet  HWaddr 00:E0:4C:76:19:87  
lo        Link encapocal Loopback  

DEVPPP=crw------- 1 root root 108, 0 Jan 30 2003 /dev/ppp
A /dev/modem symbolic link is not present
DEVFSD=
发表于 2003-8-6 17:45:09 | 显示全部楼层
找猫不需要这样找吧。
linux lspci
windows 设备管理器
要知道chipest。拆开看
发表于 2003-10-6 16:09:22 | 显示全部楼层
这个猫不象是lucent的
还是用lspci来看看,lspci的命令输出帖上来看看
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表