[求助]请问各位达人+大虾，如何在FreeBSD下添加一个modem并配置ppp协议上网？

macleo · 发表于 2003-8-24 11:14:28

请问各位达人+大虾，如何在FreeBSD下添加一个modem并配置ppp协议上网？

谢谢啦！:thank :thank :thank

macleo · 发表于 2003-8-24 16:10:53

我自己顶！

macleo · 发表于 2003-8-26 16:25:08

我自己顶！求助达人+大侠指点！谢谢！

Freebird · 发表于 2003-8-26 16:37:43

Please Read this First:
http://www.freebsd.org/doc/en_US ... k/ppp-and-slip.html

macleo · 发表于 2003-8-26 19:45:33

谢谢Freebird大侠的指点。。。。（感觉好象FreeBSD啊！）
E文满篇啊。。。。。。

macleo · 发表于 2003-8-26 19:55:33

我是说http://www.freebsd.org这里啊！

满篇的E文啊！（挠头中。。。。困惑中。。。。）

我看，我看，我看看看。。。。。。

（看不明白啊。。。。。）

我使劲看。。。。

macleo · 发表于 2003-8-26 19:58:46

Unix has always had support for serial communications. In fact, the very first Unix machines relied on serial lines for user input and output. Things have changed a lot from the days when the average ``terminal'' consisted of a 10-character-per-second serial printer and a keyboard. This chapter will cover some of the ways in which FreeBSD uses serial communications.

After reading this chapter, you will know:

How to connect terminals to your FreeBSD system.

How to use a modem to dial out to remote hosts.

How to allow remote users to login to your system with a modem.

How to boot your system from a serial console.

可是，我看了半天，还是没有明白如何添加和配置一个modem，并且拨号上网？？？

请教各位大虾，哪里有下handbook中文，英文版的？？？

我下回家漫漫研究去！谢谢啦！

macleo · 发表于 2003-8-26 20:14:21

在FreeBSD下添加一个modem并配置ppp协议上网方法简述

缺省的FreeBSD核心，只支持标准的串口，言下之意是（而不是一些串口的卡）

To see if your kernel recognizes any of your serial ports, watch for messages while the kernel is booting, or use the /sbin/dmesg command to replay the kernel's boot messages. In particular, look for messages that start with the characters sio.

为了检测你的（FreeBSD）核心在启动的时候，是否认出了你的（主板）上的串口，你需要使用命令/sbin/dmesg，来寻找启动时的字符 “sio”

Tip: To view just the messages that have the word sio, use the command:

提示：为看到上述信息，使用下列命令

# /sbin/dmesg | grep 'sio'

macleo · 发表于 2003-8-26 20:22:05

在FreeBSD下添加一个modem并配置ppp协议上网方法简述

For example, on a system with four serial ports, these are the serial-port specific kernel boot messages:

举例：一个系统带有4个串口，这些信息在核心启动时显示如下：

sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 at 0x2e8-0x2ef irq 9 on isa
sio3: type 16550A

If your kernel does not recognize all of your serial ports, you will probably need to configure a custom FreeBSD kernel for your system. For detailed information on configuring your kernel, please see Chapter 9.

如果，你的核心在启动时没有认出你所有的串口，则应该定制且编译你的核心了，参看第九章

好了！不写了！好麻烦的啊！好，找handbook去喽

Freebird · 发表于 2003-8-27 17:22:19

http://people.freebsdchina.org/kinki/16.htm

		自动登录	找回密码
密码			注册