Conexant USB ADSL驱动的解决办法

longvine

sos,sos,help me,我到现在还不能用小红帽上网呀

tweeg2000

我也是啊~~郁闷……
跟电信说要换一个以太口的猫，居然要我再加钱……
可恶的USB……

dragonnapalm

sos,sos,电信又更改了上网方式( rh2.4.20-18),所以我好不容易才搞好的adsl又得重新调整了,
我是Conexant USB ADSL的猫,以太网LLCSNAP上的桥接PPP(RFC2516),看了http://www.linuxsir.cn/bbs/showthr...,编译br2684ctl.
[root@localhost root]# br2684ctl -b -e 0 -c 0 -a 8.81
br2684ctl: error while loading shared libraries: libatm.so.1: cannot open shared object file: No such file or directory
[root@localhost root]# locate libatm.so
/usr/local/lib/libatm.so.1.0.0
/usr/local/lib/libatm.so
/usr/local/lib/libatm.so.1
why why??????????????????????????????????????????????????为什么说没有这个文件

开始我也为这个问题烦恼了很久，结果只需把他们拷到/usr/lib下面就行了。或者在/etc/ld.so.conf 中加入usr/local/lib ，运行ldconfig

dragonnapalm

另外再补充一句，建议兄弟下载最新的驱动包，这样运行驱动的时候它会自动编译br2684ctl。只须把模式设置好就行了

yeseek

感谢这些热心的人，我好久没有在linux下上去网了，都怪这个USB的猫。晚上准备装RedHat 9.0。
为我祈祷吧......

longvine

谢谢dragonnapalm(你的名字可真长),可是我启动ADSL时还是出现了问题,而且我的开机自检里有这样的错误,
bringing up interface ppp4:   line 218:  1834 Terminated              $CONNECT "$@" >/dev/null 2>&1 faild

我设置了两个拔号,PPP3和PPP4,可问题是我不管用什么命令启动,均打不开任何网页,
[root@localhost root]# /sbin/ifup ppp4(没反应，继续出现提示行)
[root@localhost root]# /sbin/ifup ppp4
[root@localhost root]# /sbin/ifup ppp3
/sbin/adsl-start: line 218:  1667 Terminated              $CONNECT "$@" >/dev/null 2>&1
[root@localhost root]# ifconfig
lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:700 (700.0 b)  TX bytes:700 (700.0 b)

[root@localhost root]# cxstart.sh(link灯这时才亮的)
>>> Inits Conexant AccessRunner <<<

>>> Loading firmware...
Conexant AccessRunner microcode upload program. 24/6/2003
Josep Comas <jcomas@gna.es>
Pascal Boucher <bcrp17@tiscali.fr>
Pawel Konieczny <konieczp@users.sourceforge.net>

I found ADSL modem with VendorID = 0572 & ProductID = cafe
Loading and sending /usr/sbin/cxfirm1.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
.....
ADSL line is up (Downstream 2048 Kbits/s, Upstream 512 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...
Using /lib/modules/2.4.20-18.8/kernel/drivers/usb/cxacru.o

/usr/sbin/cxload.sh successful
Setting PPP over Ethernet...
>>> Setting PPPoE <<<

>>> Loading br2684 kernel module...

>>> Loading ppp_generic...

>>> Loading pppoe...

>>> Loading br2684ctl...
RFC1483/2684 bridge: Interface "nas0" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.8.81, encapsulation: LLC
RFC1483/2684 bridge: Interface configured

>>> Activating interface...
>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 16/6/2003
Josep Comas <jcomas@gna.es>
Pascal Boucher <bcrp17@tiscali.fr>
Pawel Konieczny <konieczp@users.sourceforge.net>

I found ADSL modem with VendorID = 0572 & ProductID = cafe

>>> Loading pppd daemon...
/sbin/adsl-start: line 218:  1928 Terminated              $CONNECT "$@" >/dev/null 2>&1
[root@localhost root]# ifconfig
lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:700 (700.0 b)  TX bytes:700 (700.0 b)

nas0      Link encap:Ethernet  HWaddr 00:30:CD:00:03:92
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:50 (50.0 b)  TX bytes:0 (0.0 b)

[root@localhost root]#
请指教是哪里出现问题了,

dragonnapalm

建议兄弟看看这一贴：
http://www.linuxsir.cn/forum.php?mod=viewthread&tid=41094

如果还是没办法搞定pppd的问题，先用adsl-setup命令，然后选网卡的时候选nas0，看看能不能用adsl-start开网页。。。

箫神

拜托

东写西读

我的usb猫灯已经亮了，下面怎么办？我是用pppoe，看了前面的办法，但是摸不着头绪，哪位老大能详细告我一下，我真的很菜呀！

执行cxstart.sh


执行netstat -r


执行pppoe


执行cxpanel

dadawa

为什么我不行啊。。我是red hat 9.0 用实达5800ub (conexant 芯片组的)。
  我先装linux-atm-2.4.1-1.i386.rpm 包。然后就用cxacru，执行make命令
。。。。以下是make 后的结束部分：
/usr/include/linux/highmem.h: At top level:
cxacru.c:293: storage size of `recvqueue' isn't known
cxacru.c:329: storage size of `udsl_atm_devops' isn't known
cxacru.c:351: storage size of `udsl_usb_driver' isn't known
cxacru.c:713: warning: `udsl_usb_send_data_complete' defined but not used
make[1]: *** [cxacrunormal.o] Error 1
make[1]: Leaving directory `/usr/cxacru/module'
make: *** [CX_MODULE] Error 2
  
................为什么会出现上面的错误信息呢。。