LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
楼主: zhou3345

[服务新手] gentoo-sources内核.config文件配置服务

[复制链接]
发表于 2009-8-21 01:24:04 | 显示全部楼层
我的声卡没搞定


00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

是笔记本, 所以电源管理得加上。
帮我弄个配置吧,就用 gentoo-sources-2.6.30-r4 吧, 谢谢了
回复 支持 反对

使用道具 举报

发表于 2009-8-21 04:47:32 | 显示全部楼层
radeon KMS并没有一个独立的选项可以编译进内核或者不编译进内核
在staging driver里有一个选项是让radeon kms默认启用
回复 支持 反对

使用道具 举报

 楼主| 发表于 2009-8-21 07:32:04 | 显示全部楼层
Post by rogues;2018571
我的声卡没搞定


00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

是笔记本, 所以电源管理得加上。
帮我弄个配置吧,就用 gentoo-sources-2.6.30-r4 吧, 谢谢了


能补充一下你的声卡芯片情况吗(可以在windows下查看到详细信息)
回复 支持 反对

使用道具 举报

发表于 2009-8-21 09:32:25 | 显示全部楼层
感谢。很有用。

我编译的kernel出现了interruption panic
回复 支持 反对

使用道具 举报

发表于 2009-8-21 09:35:16 | 显示全部楼层
Post by rogues;2018571
我的声卡没搞定


00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

是笔记本, 所以电源管理得加上。
帮我弄个配置吧,就用 gentoo-sources-2.6.30-r4 吧, 谢谢了

如果我没有记错,内核默认就支持的。你现在有什么问题的?没有声音,还是找不到声音设备?
另外,有了内核了,还要安装alsa-utils,然后运行alsa-mixer,设定声卡unmute。
回复 支持 反对

使用道具 举报

发表于 2009-8-21 19:07:42 | 显示全部楼层
在用arch,想尝试一下gentoo
lspci -vvxx和cat /proc/cpuinfo的结果在后边

有一个特殊要求是,想能否借编译内核的缘故使得网卡工作(见这里http://bbs.archlinux.org/viewtopic.php?id=78334)

cat /proc/cpuinfo

  1. processor        : 0
  2. vendor_id        : GenuineIntel
  3. cpu family        : 6
  4. model                : 23
  5. model name        : Genuine Intel(R) CPU           U2700  @ 1.30GHz
  6. stepping        : 10
  7. cpu MHz                : 1300.000
  8. cache size        : 2048 KB
  9. fpu                : yes
  10. fpu_exception        : yes
  11. cpuid level        : 13
  12. wp                : yes
  13. flags                : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe syscall nx lm constant_tsc up arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm
  14. bogomips        : 2593.33
  15. clflush size        : 64
  16. cache_alignment        : 64
  17. address sizes        : 36 bits physical, 48 bits virtual
  18. power management:
复制代码


lspci -vvxx

  1. 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
  2.         Subsystem: Lenovo Device 3a00
  3.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  4.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  5.         Latency: 0
  6.         Capabilities: <access denied>
  7.         Kernel driver in use: agpgart-intel
  8.         Kernel modules: intel-agp
  9. 00: 86 80 40 2a 06 01 90 20 07 00 00 06 00 00 00 00
  10. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  11. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 00 3a
  12. 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

  13. 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
  14.         Subsystem: Lenovo Device 3a02
  15.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  16.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  17.         Latency: 0
  18.         Interrupt: pin A routed to IRQ 30
  19.         Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=4M]
  20.         Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
  21.         Region 4: I/O ports at 1800 [size=8]
  22.         Expansion ROM at <unassigned> [disabled]
  23.         Capabilities: <access denied>
  24.         Kernel driver in use: i915
  25. 00: 86 80 42 2a 07 04 90 00 07 00 00 03 00 00 80 00
  26. 10: 04 00 00 f4 00 00 00 00 0c 00 00 d0 00 00 00 00
  27. 20: 01 18 00 00 00 00 00 00 00 00 00 00 aa 17 02 3a
  28. 30: 00 00 00 00 90 00 00 00 00 00 00 00 0a 01 00 00

  29. 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
  30.         Subsystem: Lenovo Device 3a02
  31.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  32.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  33.         Latency: 0
  34.         Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=1M]
  35.         Capabilities: <access denied>
  36. 00: 86 80 43 2a 07 00 90 00 07 00 80 03 00 00 80 00
  37. 10: 04 00 40 f4 00 00 00 00 00 00 00 00 00 00 00 00
  38. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 02 3a
  39. 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00

  40. 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
  41.         Subsystem: Lenovo Device 3a09
  42.         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  43.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  44.         Latency: 0
  45.         Interrupt: pin A routed to IRQ 16
  46.         Region 4: I/O ports at 1820 [size=32]
  47.         Capabilities: <access denied>
  48.         Kernel driver in use: uhci_hcd
  49.         Kernel modules: uhci-hcd
  50. 00: 86 80 37 29 05 00 90 02 03 00 03 0c 00 00 80 00
  51. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  52. 20: 21 18 00 00 00 00 00 00 00 00 00 00 aa 17 09 3a
  53. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

  54. 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
  55.         Subsystem: Lenovo Device 3a0a
  56.         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  57.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  58.         Latency: 0
  59.         Interrupt: pin B routed to IRQ 21
  60.         Region 4: I/O ports at 1840 [size=32]
  61.         Capabilities: <access denied>
  62.         Kernel driver in use: uhci_hcd
  63.         Kernel modules: uhci-hcd
  64. 00: 86 80 38 29 05 00 90 02 03 00 03 0c 00 00 00 00
  65. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  66. 20: 41 18 00 00 00 00 00 00 00 00 00 00 aa 17 0a 3a
  67. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00

  68. 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
  69.         Subsystem: Lenovo Device 3a0b
  70.         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  71.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  72.         Latency: 0
  73.         Interrupt: pin C routed to IRQ 19
  74.         Region 4: I/O ports at 1860 [size=32]
  75.         Capabilities: <access denied>
  76.         Kernel driver in use: uhci_hcd
  77.         Kernel modules: uhci-hcd
  78. 00: 86 80 39 29 05 00 90 02 03 00 03 0c 00 00 00 00
  79. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  80. 20: 61 18 00 00 00 00 00 00 00 00 00 00 aa 17 0b 3a
  81. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00

  82. 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
  83.         Subsystem: Lenovo Device 3a0c
  84.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  85.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  86.         Latency: 0
  87.         Interrupt: pin C routed to IRQ 19
  88.         Region 0: Memory at f4804800 (32-bit, non-prefetchable) [size=1K]
  89.         Capabilities: <access denied>
  90.         Kernel driver in use: ehci_hcd
  91.         Kernel modules: ehci-hcd
  92. 00: 86 80 3c 29 06 01 90 02 03 20 03 0c 00 00 00 00
  93. 10: 00 48 80 f4 00 00 00 00 00 00 00 00 00 00 00 00
  94. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 0c 3a
  95. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00

  96. 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
  97.         Subsystem: Lenovo Device 3a0d
  98.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  99.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  100.         Latency: 0, Cache Line Size: 64 bytes
  101.         Interrupt: pin A routed to IRQ 22
  102.         Region 0: Memory at f4600000 (64-bit, non-prefetchable) [size=16K]
  103.         Capabilities: <access denied>
  104.         Kernel driver in use: HDA Intel
  105.         Kernel modules: snd-hda-intel
  106. 00: 86 80 3e 29 06 01 10 00 03 00 03 04 10 00 00 00
  107. 10: 04 00 60 f4 00 00 00 00 00 00 00 00 00 00 00 00
  108. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 0d 3a
  109. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

  110. 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
  111.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  112.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  113.         Latency: 0, Cache Line Size: 64 bytes
  114.         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  115.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  116.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  117.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  118.         Capabilities: <access denied>
  119.         Kernel driver in use: pcieport-driver
  120.         Kernel modules: shpchp
  121. 00: 86 80 40 29 07 05 10 00 03 00 04 06 10 00 81 00
  122. 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
  123. 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
  124. 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00

  125. 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
  126.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  127.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  128.         Latency: 0, Cache Line Size: 64 bytes
  129.         Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
  130.         I/O behind bridge: 00002000-00002fff
  131.         Memory behind bridge: f2000000-f3ffffff
  132.         Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
  133.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  134.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  135.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  136.         Capabilities: <access denied>
  137.         Kernel driver in use: pcieport-driver
  138.         Kernel modules: shpchp
  139. 00: 86 80 42 29 07 05 10 00 03 00 04 06 10 00 81 00
  140. 10: 00 00 00 00 00 00 00 00 00 03 04 00 20 20 00 00
  141. 20: 00 f2 f0 f3 01 f0 f1 f1 00 00 00 00 00 00 00 00
  142. 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00

  143. 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
  144.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  145.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  146.         Latency: 0, Cache Line Size: 64 bytes
  147.         Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
  148.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  149.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  150.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  151.         Capabilities: <access denied>
  152.         Kernel driver in use: pcieport-driver
  153.         Kernel modules: shpchp
  154. 00: 86 80 44 29 07 05 10 00 03 00 04 06 10 00 81 00
  155. 10: 00 00 00 00 00 00 00 00 00 05 05 00 f0 00 00 20
  156. 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
  157. 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 04 00

  158. 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
  159.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  160.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  161.         Latency: 0, Cache Line Size: 64 bytes
  162.         Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
  163.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  164.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  165.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  166.         Capabilities: <access denied>
  167.         Kernel driver in use: pcieport-driver
  168.         Kernel modules: shpchp
  169. 00: 86 80 46 29 07 05 10 00 03 00 04 06 10 00 81 00
  170. 10: 00 00 00 00 00 00 00 00 00 06 06 00 f0 00 00 20
  171. 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
  172. 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 04 00

  173. 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
  174.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  175.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  176.         Latency: 0, Cache Line Size: 64 bytes
  177.         Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
  178.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  179.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  180.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  181.         Capabilities: <access denied>
  182.         Kernel driver in use: pcieport-driver
  183.         Kernel modules: shpchp
  184. 00: 86 80 48 29 07 05 10 00 03 00 04 06 10 00 81 00
  185. 10: 00 00 00 00 00 00 00 00 00 07 07 00 f0 00 00 20
  186. 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
  187. 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00

  188. 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
  189.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  190.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  191.         Latency: 0, Cache Line Size: 64 bytes
  192.         Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
  193.         Memory behind bridge: f4500000-f45fffff
  194.         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  195.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  196.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  197.         Capabilities: <access denied>
  198.         Kernel driver in use: pcieport-driver
  199.         Kernel modules: shpchp
  200. 00: 86 80 4a 29 07 05 10 00 03 00 04 06 10 00 81 00
  201. 10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 20
  202. 20: 50 f4 50 f4 f1 ff 01 00 00 00 00 00 00 00 00 00
  203. 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00

  204. 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
  205.         Subsystem: Lenovo Device 3a14
  206.         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  207.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  208.         Latency: 0
  209.         Interrupt: pin A routed to IRQ 23
  210.         Region 4: I/O ports at 1880 [size=32]
  211.         Capabilities: <access denied>
  212.         Kernel driver in use: uhci_hcd
  213.         Kernel modules: uhci-hcd
  214. 00: 86 80 34 29 05 00 90 02 03 00 03 0c 00 00 80 00
  215. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  216. 20: 81 18 00 00 00 00 00 00 00 00 00 00 aa 17 14 3a
  217. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

  218. 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
  219.         Subsystem: Lenovo Device 3a15
  220.         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  221.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  222.         Latency: 0
  223.         Interrupt: pin B routed to IRQ 19
  224.         Region 4: I/O ports at 18a0 [size=32]
  225.         Capabilities: <access denied>
  226.         Kernel driver in use: uhci_hcd
  227.         Kernel modules: uhci-hcd
  228. 00: 86 80 35 29 05 00 90 02 03 00 03 0c 00 00 00 00
  229. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  230. 20: a1 18 00 00 00 00 00 00 00 00 00 00 aa 17 15 3a
  231. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00

  232. 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
  233.         Subsystem: Lenovo Device 3a16
  234.         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  235.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  236.         Latency: 0
  237.         Interrupt: pin C routed to IRQ 18
  238.         Region 4: I/O ports at 18c0 [size=32]
  239.         Capabilities: <access denied>
  240.         Kernel driver in use: uhci_hcd
  241.         Kernel modules: uhci-hcd
  242. 00: 86 80 36 29 05 00 90 02 03 00 03 0c 00 00 00 00
  243. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  244. 20: c1 18 00 00 00 00 00 00 00 00 00 00 aa 17 16 3a
  245. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00

  246. 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
  247.         Subsystem: Lenovo Device 3a17
  248.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  249.         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  250.         Latency: 0
  251.         Interrupt: pin A routed to IRQ 23
  252.         Region 0: Memory at f4804c00 (32-bit, non-prefetchable) [size=1K]
  253.         Capabilities: <access denied>
  254.         Kernel driver in use: ehci_hcd
  255.         Kernel modules: ehci-hcd
  256. 00: 86 80 3a 29 06 01 90 02 03 20 03 0c 00 00 00 00
  257. 10: 00 4c 80 f4 00 00 00 00 00 00 00 00 00 00 00 00
  258. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 17 3a
  259. 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

  260. 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
  261.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  262.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  263.         Latency: 0
  264.         Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
  265.         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  266.         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  267.                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  268.         Capabilities: <access denied>
  269. 00: 86 80 48 24 07 01 10 00 93 01 04 06 00 00 01 00
  270. 10: 00 00 00 00 00 00 00 00 00 09 09 00 f0 00 80 22
  271. 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
  272. 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00

  273. 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
  274.         Subsystem: Lenovo Device 3a19
  275.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  276.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  277.         Latency: 0
  278.         Capabilities: <access denied>
  279.         Kernel modules: iTCO_wdt
  280. 00: 86 80 17 29 07 00 10 02 03 00 01 06 00 00 80 00
  281. 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  282. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 19 3a
  283. 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

  284. 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
  285.         Subsystem: Lenovo Device 3a1a
  286.         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  287.         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  288.         Latency: 0
  289.         Interrupt: pin B routed to IRQ 31
  290.         Region 0: I/O ports at 1818 [size=8]
  291.         Region 1: I/O ports at 180c [size=4]
  292.         Region 2: I/O ports at 1810 [size=8]
  293.         Region 3: I/O ports at 1808 [size=4]
  294.         Region 4: I/O ports at 18e0 [size=32]
  295.         Region 5: Memory at f4804000 (32-bit, non-prefetchable) [size=2K]
  296.         Capabilities: <access denied>
  297.         Kernel driver in use: ahci
  298.         Kernel modules: ahci
  299. 00: 86 80 29 29 07 04 b0 02 03 01 06 01 00 00 00 00
  300. 10: 19 18 00 00 0d 18 00 00 11 18 00 00 09 18 00 00
  301. 20: e1 18 00 00 00 40 80 f4 00 00 00 00 aa 17 1a 3a
  302. 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00

  303. 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
  304.         Subsystem: Lenovo Device 3a1d
  305.         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  306.         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  307.         Interrupt: pin C routed to IRQ 19
  308.         Region 0: Memory at 88000000 (64-bit, non-prefetchable) [size=256]
  309.         Region 4: I/O ports at 1c00 [size=32]
  310.         Kernel driver in use: i801_smbus
  311.         Kernel modules: i2c-i801
  312. 00: 86 80 30 29 03 01 80 02 03 00 05 0c 00 00 00 00
  313. 10: 04 00 00 88 00 00 00 00 00 00 00 00 00 00 00 00
  314. 20: 01 1c 00 00 00 00 00 00 00 00 00 00 aa 17 1d 3a
  315. 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00

  316. 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
  317.         Subsystem: Intel Corporation Device 1311
  318.         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  319.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  320.         Latency: 0, Cache Line Size: 64 bytes
  321.         Interrupt: pin A routed to IRQ 32
  322.         Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=8K]
  323.         Capabilities: <access denied>
  324.         Kernel driver in use: iwlagn
  325.         Kernel modules: iwlagn
  326. 00: 86 80 37 42 06 01 10 00 00 00 80 02 10 00 00 00
  327. 10: 04 00 00 f2 00 00 00 00 00 00 00 00 00 00 00 00
  328. 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 11 13
  329. 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00

  330. 08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
  331.         Subsystem: Lenovo Device 38a2
  332.         Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  333.         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  334.         Interrupt: pin A routed to IRQ 17
  335.         Region 0: Memory at f4500000 (64-bit, non-prefetchable) [size=64K]
  336.         Capabilities: <access denied>
  337.         Kernel modules: tg3
  338. 00: e4 14 92 16 02 01 10 00 01 00 00 02 10 00 00 00
  339. 10: 04 00 50 f4 00 00 00 00 00 00 00 00 00 00 00 00
  340. 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 a2 38
  341. 30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 00 00
复制代码
回复 支持 反对

使用道具 举报

 楼主| 发表于 2009-8-21 20:05:08 | 显示全部楼层
@fallening :
根据我自己的机器配置修改了一下驱动,看看有没有问题:)

@rogues :
兄弟还在关注吗,请试试下面的配置

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
回复 支持 反对

使用道具 举报

发表于 2009-8-21 20:07:36 | 显示全部楼层
thx, I will try
回复 支持 反对

使用道具 举报

发表于 2009-8-21 20:54:01 | 显示全部楼层
上边的config我已经编译完成了,一切正常
跟原来的kernel一样

只有两个问题
1) 耳机插入之后扬声器不关
2)有线网卡加载失败
可能是内核的原因,我准备向官方提交bug了

下边那个我再尝试一下

非常感谢
回复 支持 反对

使用道具 举报

发表于 2009-8-21 20:56:50 | 显示全部楼层
@zhou3345
非常感谢, 我呆会儿就试试
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表