驱动你的扫描仪，Acer 640U usb扫描仪为例

alyroot

没有什么bin文件的。

harrypotter

不太清楚了，好像在snapscan的主页上有个支持的firmware的列表，恰好640就有，估计不同产品不同，毕竟linux下支持的scanner只是几个大公司的.

小小蚊子

一台清华紫光uniscanB700扫描仪
我安装了
sane-backends-1.0.9-5.i386.rpm              sane-backends-devel-1.0.9-5.i386.rpm
sane-frontends-1.0.9-2.i386.rpm
三个包，在kde界面下运行xsane却提示找不到扫描仪呢？？
请各位大虾指教啊!!!!!

harrypotter

兄弟请参考这贴：
http://www.linuxsir.cn/forum.php?mod=viewthread&tid=23140

建议兄弟发贴前先参考置顶于精华.

zhangshoug

我有一个B720，我按照harrypotter兄所说的参考做了，但我没有成功，因为我没有找到u96v121.bin
你如果配置成功了，请把你的方法讲一讲，大家共同进步

harrypotter

不同的扫描仪的firmware不一样的，好象在snapscan的主页有个列表.
http://snapscan.sourceforge.net/

zhangshoug

我先安装了linbusb,然后按照上面的贴子做的,在windows的驱动中找到layout.bin作为firmware,接着运行以下命令,最后还是没有驱动起来.
[root@zhangshg xsane-0.91]#  sane-find-scanner

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

found USB scanner (vendor=0x0461, product=0x0375) at libusb:002:002
#表明找到了扫描仪
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Scanners connected to the parallel port or other proprietary ports can't be
  # detected by this program.

[root@zhangshg xsane-0.91]# scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
请大家帮忙搞定它

北南南北

我先安装了linbusb,然后按照上面的贴子做的,在windows的驱动中找到layout.bin作为firmware,接着运行以下命令,最后还是没有驱动起来.

看起来layout.bin文件不是firewall，可能问题就出现在这里。

看一下有没有别的类似的.bin文件？？？