网卡不能ping通局域网问题

Amorous · 发表于 2005-12-16 08:11:23

...都一天了。。。。怎么回事呢？就一块网卡阿。。应该ip没错，物理连接没问题就能通的阿。把另一台机器防火墙关了看看？尽量减少不确定因素吧。我都郁闷了:comp

sagittariu · 发表于 2005-12-16 12:33:13

楼上的哥哥,不止一天了,都几星期了,根本不知道什么原因啊
我在win上ping得好好的机器,在Linux下就ping不通,绝无防火墙
我猜想是没设置好,但以前我在台式机上也是这么设的
LiveCD启动机器又不能挂上根目录
己经试过N个发行版了,Ubuntu,fedora,Mandriva,都不行.....我真的好郁闷啊啊啊啊啊啊,什么破烂笔记本,Linux都装不上

有南昌的兄弟没有,救救我啊

Amorous · 发表于 2005-12-16 15:30:09

都不行？是不是网卡识别有问题啊？

sagittariu · 发表于 2005-12-16 19:01:14

lsmod

Module Size Used by
tg3 94116 0
dm_mirror 22940 0
dm_mod 57828 1 dm_mirror
ata_piix 9668 0
ahci 11588 0
sata_qstor 9860 0
sata_vsc 8196 0
sata_uli 7392 0
sata_sis 7232 0
sata_sx4 13764 0
sata_nv 9220 0
sata_via 8612 0
sata_svw 7620 0
sata_sil 9284 0
sata_promise 10340 0
libata 46180 12 ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil,sata_promise
sbp2 23688 0
ohci1394 34452 0
ieee1394 100792 2 sbp2,ohci1394
sl811_hcd 13600 0
ohci_hcd 21284 0
uhci_hcd 32144 0
usb_storage 70752 0
usbhid 43040 0
ehci_hcd 31816 0
usbcore 115996 7 sl811_hcd,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd

复制代码

我的网卡用的模块是 tg3,但使用数为0,这会有问题么?
每次启动Linux的时候都会 [color="Red"]Disabling IRQ 10# ,IRQ 10#是干什么的? 跟这个有关系么?

sagittariu · 发表于 2005-12-16 19:28:29

lsmod | grep IRQ

Kernel command line: noapic root=/dev/hda7 vga=791 init=/linuxrc real_root=/dev/hda7 irq=routeirq
CPU 0 irqstacks, hard=c049c000 soft=c0494000
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[color="Red"]ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10[/color]
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[color="Red"]ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10[/color]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: not 100% native mode: will probe irqs later
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xb0040000
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001880
ACPI: PCI Interrupt 0000:06:07.2[A]: no GSI - using IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[b0117000-b01177ff] Max Packet=[2048]
[color="Red"]irq 10: nobody cared![/color]
[<c0135e62>] __report_bad_irq+0x22/0x80
[<c0135a38>] __do_IRQ+0x108/0x110
[<c010549a>] do_IRQ+0x4a/0x70
[<c011e461>] __do_softirq+0x51/0xe0
[<c01055a7>] do_softirq+0x57/0x60
[<c011e5c4>] irq_exit+0x44/0x50
[<c037d466>] _spin_unlock_irqrestore+0x6/0x30
[<e004b2b0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<e004b2b0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[color="Red"]Disabling IRQ #10
ACPI: PCI Interrupt 0000:06:06.0[A]: no GSI - using IRQ 10[/color]
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]

复制代码

好像开始启用了IRQ 10#,后来又禁止了.....

[color="Red"]ACPI: PCI Interrupt 0000:06:06.0[A]: no GSI - using IRQ 10
什么意思?

Amorous · 发表于 2005-12-16 20:04:09

不知道，中断号是10吧。
你的模块使用次数有问题吧，怎么会是0呢。奇怪哦。你知道自己的网卡什么芯片么？有没有手动加载模块试试？有些时候会出现模块加上之后其实并不能用的情况的。

Amorous · 发表于 2005-12-16 20:09:39

GSI是超大规模集成电路。呵呵，不知道啥意思

sagittariu · 发表于 2005-12-16 20:19:29

Post by Amorous
不知道，中断号是10吧。
你的模块使用次数有问题吧，怎么会是0呢。奇怪哦。你知道自己的网卡什么芯片么？有没有手动加载模块试试？有些时候会出现模块加上之后其实并不能用的情况的。

我手动加载tg3模块后就eth0可以挂起来,所以需要的模块还应该是tg3

ls /proc/interrupts

CPU0
0: 85805 XT-PIC timer
1: 363 XT-PIC i8042
2: 0 XT-PIC cascade
9: 65 XT-PIC acpi
10: 100000 XT-PIC uhci_hcd:usb4, uhci_hcd:usb5, eth0
11: 43 XT-PIC ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ohci1394
14: 1969 XT-PIC ide0
NMI: 0
LOC: 85763
ERR: 0
MIS: 0

复制代码

eth0还是使用的irq 10,kernel把irq 10禁了...........晕死哦

Amorous · 发表于 2005-12-16 22:32:10

能挂起来不一定就是正确的，比如我的8139too也可以挂另外一个模块，可是其实不能用的。我原来就遇到过一次网卡驱动识别错误，结果不能拨号的情况。

Amorous · 发表于 2005-12-16 22:38:40

Post by sagittariu
lsmod | grep IRQ

PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[color="Red"]ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10[/color]

ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

[color="Red"]Disabling IRQ #10

ACPI: PCI Interrupt 0000:06:06.0[A]: no GSI - using IRQ 10[/color]

eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]

复制代码

?

这些东西呢？

		自动登录	找回密码
密码			注册