转载 关于调整刷新率得文章 很值得一看!

wgd539

bu dong a ,wo xianzai lian shurufa dou bu zhidao zhenme zhuang ne !~~~~

emilio

前几天我一进X就黑屏，然后过10秒就可以进X了，后来朋友跟我无意中说起可能是刷新率过高，于是我把显示器的说明书拿出来，把水平刷新频率的最大值改小了20，现在就不回黑屏了，很顺利的就进X了。呵呵。

XF86Config需要我们好好的理解。

lqch_wy

可怜我的因为它在初始化X window的时候，提示说鼠标接口正忙，弄得我伤心不已，明明在Red Flag Linux 4.0里面都可以进入的，而在同一台电脑上，Red Hat Linux系列的就是不可以（包括8.0和9.0都不行）

更让我不明白的是，以前安装8.0也挺顺利地进去了.
哎！也好，就当练练命令行吧？

wgd539

终于把输入法装上了撒,好辛苦啊.
可刷新频率还是不会,楼主能不能讲得简单些,

lishuxi2003

讲的不切实际,讲些理论没什么用.
有不说明具体怎么配置

ltkun

xrandr

ywbkgs

我那里头只有800×600……类的，没有后面跟的东西！

贱虱

我是新手哦
看不懂呀~~
我不小心把800*600改成了1024*768
结果就超频了
我该怎么做呀？？

harmisir

thank you 楼主。

765q

我正为这个问题苦闷!楼主贴的跟我这不一样!慢慢研究.各位朋友,知道的请不吝指教,不知道的,有兴趣的一起研究.

新装了red hat9,刷新率现在是60HZ,分辨率是1024*768.

闪得厉害,眼睛好痛,想设置成85hz但不知道怎么设置.

我的显卡是万丽 NVIDIA FX5200 64M 128bit

知道的朋友,恳请你指导下我该怎么做?谢谢了.

/etc/X11/XF86Config 的内容如下

=====================================================

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "rotocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "rotocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "SyncMaster"
DisplaySize 320 240
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "VESA driver (generic)"
VideoRam 65536
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

=======================================================