运行后出现以下提示,modem还是老样子
------------------------------------------------------
不知道北南有没有60*460的广告条,我的网站帮你宣传一下了,
http://real99.51.net
,只是现在上网时间少了,没空更新了流量从原来的2000到现在的几百人了.买了个real99.net的域名
也没用上
------------------------------------------------------
ot@localhost utils]# ./checkout
This checkout utility currently
checks for expected components of a Lucent DSP winmodem installation
provides a minor tutorial
if modem driver insertion is successfull
runs a wvdialconf test
unloads excess drivers if module loading fails
Does not as yet have signficant problem solving action
except for referrals to Documentation.
Can readily be adapted to work with other winmodem installations.
The current Working folder is: /usr/share/doc/ltmodem-kv_2.4.18_5-8.22a5/utils.
To continue: Enter
====================================================================
Now acquiring distribution data:
The Linux distribution is: redhat
End of distribution check.
Diagnostic information is progressively being written to /usr/share/doc/ltmodem-kv_2.4.18_5-8.22a5/utils/checkout.txt .
Often, contents of this record can aid in solving problems.
ls: ../ltmodem*: No such file or directory
To continue: Enter
====================================================================
You will be requested to participate by prompts to Enter a pre-written command such as:
ls NoFile
Enter
with the resulting output appearing between the dotted lines.
--------------------
ls: NoFile: No such file or directory
--------------------
And with
--------------------
--------------------
meaning no output was generated.
=================================================================
Proceeding to access PCI modem hardware information
Enter
Found /usr/share/doc/ltmodem-kv_2.4.18_5-8.22a5/utils/scanPCI
... using /sbin/lspci
By the Class 07nn: criteria, detected system PCI modem devices are:
device Class VendorIDeviceID == ModemID
----------------------------------------------------------------
00:0f.0 Class 0780: 11c1:0440 (rev 01)
00:0f.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
VENDOR 0x11c1 DEVICE 0x0440
ID are within the serviced ranges:
To continue: Enter
A supported DSP Modem verified:
MODEM_ID=11c1:0440
IDs of supported Lucent DSP PCI modems have ranges:
Vendor vendor_id device_id range
-----------------------------------------------
LUCENT 0x11c1 0x0440-0x045c
XIRCOM 0x115d 0x0000-0x000F
XIRCOM 0x115d 0x0440-0x045c
XIRCOM 0x115d 0x0010-0x03ff
To see detailed information on 11c1:0440
Enter
Copying this detailed information to ModemData.txt
----------------------------------------------
MODEL_DATA= 0x0440 -- Mars 2 - data/fax/voice
00:0f.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
00:0f.0 Class 0780: 11c1:0440 (rev 01)
Subsystem: 11c1:0440
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <ERR-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at cc00
Region 2: I/O ports at c800 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
----------------------------------------------
Proceeding to verify the presence of the modem drivers, please
Enter
The active System kernel is 2.4.18-3
SUBVER=4
For kernels 4.nn the modem drivers should have been installed within:
/lib/modules/2.4.18-3/kernel/drivers/char
Changing directory:
cd /lib/modules/2.4.18-3/kernel/drivers/char
The output to the next output should at least include:
-------------------
-rw-r--r-- 1 root root SIZE DATE_install lt_modem.o
-rw-r--r-- 1 root root SIZE DATE_install lt_serial.o
-------------------
wherein the driver with proprietary DSP=Digital Signal Processor code is:
lt_modem.o
and the driver with Open Source code is:
lt_serial.o
To display the resident drivers:
Enter
-------------------
ls: lt_*: No such file or directory
ls: lt_*: No such file or directory
-------------------
An essential driver has not been installed: lt_modem.o
LT_Modules installed are LTM=2.4.18-5/ltmodem/lt_modem.o 2.4.18-5/ltmodem/lt_serial.o
Listing contents of /lib/modules/2.4.18-3/kernel/drivers/char/
acquirewdt.o epca.o istallion.o pc110pad.o stallion.o
advantechwdt.o esp.o joystick pcmcia sx.o
agp eurotechwdt.o logibusmouse.o pcwd.o synclink.o
alim7101_wdt.o ftape lp.o ppdev.o toshiba.o
amd768_pm.o generic_serial.o machzwd.o qpmouse.o w83877f_wdt.o
amd768_rng.o i810_rng.o mk712.o riscom8.o wafer5823wdt.o
atixlmouse.o i810-tco.o moxa.o rocket.o wdt.o
busmouse.o i8k.o msbusmouse.o sc1200wdt.o wdt_pci.o
cyclades.o ib700wdt.o mxser.o sc520_wdt.o
drm ip2main.o n_hdlc.o softdog.o
dtlk.o ip2.o n_r3964.o sonypi.o
ecc.o isicom.o nvram.o specialix.o
If you cannot resolve the problems, please send to discuss@linmodems.org |