|
|
楼主 |
发表于 2003-8-17 01:02:12
|
显示全部楼层
我现在dhcpd.conf设置如下：
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
option subnet-mask 255.255.255.0;
option domain-name "domain.org";
option domain-name-servers 61.139.2.69;
option broadcast-address 192.168.1.255;
range dynamic-bootp 192.168.1.2 192.168.1.254;
default-lease-time 21600;
max-lease-time 43200;
}
第一种启动
启动命令：dhcpd start
报错信息：
[root@server root]# dhcpd start
Internet Software Consortium DHCP Server V3.0pl1
Copyright 1995-2001 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 0 leases to leases file.
No subnet declaration for start (0.0.0.0).
** Ignoring requests on start. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface start is attached. **
Not configured to listen on any interfaces!
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
第二种启动
启动命令：/etc/init.d/dhcpd start
报错信息：
[root@server root]# /etc/init.d/dhcpd start
启动 dhcpd：Internet Software Consortium DHCP Server V3.0pl1
Copyright 1995-2001 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 0 leases to leases file.
No subnet declaration for eht1 (0.0.0.0).
** Ignoring requests on eht1. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface eht1 is attached. **
Not configured to listen on any interfaces!
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
[失败] |
|
IP卡
狗仔卡
发表于 2003-8-13 22:32:51
显身卡