fc6下 NVIDI 9626 驱动安装成功 打开了3D功能

shael

哈哈，装了test的驱动就可以启动了 gf4 mx420的显卡也启动了3d效果:2cool

谢谢楼主～～～

huaan

Post by wayhomeke
还是出错啦

[('package kernel-2.6.18-1.2798.fc6 is already installed', (2, None, 0L)), ('file /boot/System.map-2.6.18-1.2798.fc6 from install of kernel-2.6.18-1.2798.fc6 conflicts with file from package kernel-2.6.18-1.2798.fc6', (7, '/boot/System.map-2.6.18-1.2798.fc6', 0L)), ('file /boot/config-2.6.18-1.2798.fc6 from install of kernel-2.6.18-1.2798.fc6 conflicts with file from package kernel-2.6.18-1.2798.fc6', (7, '/boot/config-2.6.18-1.2798.fc6', 0L)), ('file /boot/symvers-2.6.18-1.2798.fc6.gz from install of kernel-2.6.18-1.2798.fc6 conflicts with file from package kernel-2.6.18-1.2798.fc6', (7, '/boot/symvers-2.6.18-1.2798.fc6.gz', 0L)), ('file /boot/vmlinuz-2.6.18-1.2798.fc6 from install of kernel-2.6.18-1.2798.fc6 conflicts with file from package kernel-2.6.18-1.2798.fc6', (7, '/boot/vmlinuz-2.6.18-1.2798.fc6', 0L))]

到底有什么办法 啊！楼主！路过的兄弟也想想办法啊！版 主帮帮忙啊！

Jeff-cao

装好驱动然后改一下xorg.conf，立刻重启。

huaan

Post by Jeff-cao
装好驱动然后改一下xorg.conf，立刻重启。

提示：这个驱动没有装成功啊！提示的就是个错误！我晕啊！

huaan

为了能安装这个东东，用了二天时间，头都 大了，还是不行啊！路过的大侠！版 主！帮帮忙啊！最好以用中文指导安装！在此谢谢了！

ixlh

你可以到livna网站的test目录下载此驱动的RPM包安装。

tianyi1111

转自www.chinalinuxpub.com 冷风的方法

FC6默认安装完后无法安装编译nvidia的驱动，在某些机器上还会导致黑屏
解决办法如下：
1下载Nvidia的最新驱动
ftp://download.nvidia.com/XFree8 ... 6-1.0-9626-pkg1.run
2 进单用户模式
# chmod +x NVIDIA-Linux-x86-1.0-9626-pkg1.run

3 解压缩驱动包
# ./NVIDIA-Linux-x86-1.0-9626-pkg1.run --extract-only
4 修改一个头文件
# cd NVIDIA-Linux-x86-1.0-9626-pkg1/usr/src/nv
修改nv-linux.h将

将 #include linux/config.h
改为# include linux/autoconf.h

5 然后切换到NVIDIA-Linux-x86-1.0-9626-pkg1目录下执行
# ./nvidia-installer
按照常规的nvidia的安装方法安装即可

进行安装之后修改你的/etc/X11/xorg.conf的内容为（记得先备份）
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 20 16:56:19 PDT 2006
# Xorg configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib/xorg/modules"
EndSection

Section "Module"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "glx"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "rotocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Monitor"

Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Device"

# Enable 32-bit ARGB GLX Visuals
Identifier "Videocard0"
Driver "nvidia"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "DisableGLXRootClipping" "True"
Option "AddARGBGLXVisuals" "True"
# Uncomment me if you get black screens with Compiz
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

执行 系统-->首选项-->Desktop Effects
然后点Enable Desktop Effects
如果不报错，重启x就可以看到特效了

terree

搂主，你指的“添加／删除软件那里”怎么选？
我怎么找不到？

huaan

楼上的兄弟请教一下：
4 修改一个头文件
# cd NVIDIA-Linux-x86-1.0-9626-pkg1/usr/src/nv
修改nv-linux.h将

将 #include linux/config.h
改为# include linux/autoconf.h
这步不明白！到底改的是什么？

lsk03

Post by terree
搂主，你指的“添加／删除软件那里”怎么选？
我怎么找不到？

参考这里
http://www.linuxsir.cn/bbs/showthread.php?t=278539