我的显卡驱动装上了，这是我的一点经验。

wy3228

麻烦大哥再帮我看看汉化后的XF86Congfig-4,我怕又错了再重装.我知道很麻烦你,可请你一定要帮帮我.谢谢了!!!

wy3228

我不明白"RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
如果汉化就把路径加在这里，如果不汉化，就不要动了 "和"Load "xtt"如果汉化了，在加上这一句没有汉化就不要加了 "这两句话的含义.麻烦再解释一下,好吗?

北南南北

# File generated by anaconda.

Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"


# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "/usr/share/fonts/zh_CN/TrueType/simsun"这句是汉化的路径，转移动这里
FontPath "unix/:7100"

EndSection

Section "Module"
Load "xtt"这句是必有
#Load "GLcore"在这句前面加上#号
#Load "dbe"在这句前面加上#号
Load "extmod"
Load "fbdevhw"
#Load "dri"在这句前面加上#号
Load "glx"
Load "record"
#Load "type1"在这句前面加上#号
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "rotocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc102"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "rotocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-62
VertRefresh 50-75
#Option "dpms"在这句前面加上#号

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
# no known options
Identifier "NVIDIA GeForce 3 (generic)"
Driver "nvidia"把nv改成nvidia
VendorName "NVIDIA GeForce 3 (generic)"
BoardName "NVIDIA GeForce 3 (generic)"

#BusID
EndSection

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 3 (generic)"
Monitor "Monitor0"
DefaultDepth 24

Subsection "Display"
Depth 24
Modes "1024x768" "1024x768"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection

我标红字的地方，都是要改的地方，你按我说的改就行了。。和原文件对照一下，这个不难改。。

wy3228

谢谢了,大哥!!我终于装上了,谢谢!!!!!!!