LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
楼主: jin.liu

Redhat 9.0 声卡驱动OSS---》支持绝大多数声卡

[复制链接]
发表于 2003-5-23 06:51:16 | 显示全部楼层

现在可以打开了,但还是没有声音!

我先装的xmms再装oss就可以soundon了,然后我用[root@programmer2 oss]# ./ossxmix
来把声音都调到最大,可是还是没有声音呀!
我没再用系统的声卡检测了呀,可是还是不出声呀!
放MP3看到在走,波表也在动,可是就是没有一点点声音!
发表于 2003-5-23 12:27:15 | 显示全部楼层
换一个耳机插孔应该就ok了,我的就是把那个耳机插到了话筒的孔里面就ok了
呵呵!~~~~
发表于 2003-5-23 20:44:29 | 显示全部楼层
/usr/lib/oss/soundon.log


把这个文件的内容帖上来,多谢。
发表于 2003-5-23 21:11:37 | 显示全部楼层

换了个地方插,还是没声音呀!

换了个地方插,还是没声音呀!
发表于 2003-5-23 21:12:55 | 显示全部楼层

这是soundon.log

五  5月 23 19:11:46 CST 2003
OSS build 3.9.7h-0304051449 (Linux-2.4.20-8 )
Kernel version: Linux PROGRAMMER2 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
Kernel signature: d275289c16f68c608d2cb97f3cb0d584
Modutils version: 2.4.22
19:11:48  up 45 min,  3 users,  load average: 0.13, 0.15, 0.12
=== Running /usr/local/bin/soundon ===
Install directory: /usr/lib/oss
Picked sndshield from 2.4.20-8.gz

Unloading the existing sound driver
If your system freezes now, please reboot and disable the current driver manually.
Trying to disable the conflicting sound driver
/etc/modules.conf backed up to /etc/modules.conf.pre-oss
Warning: loading /usr/lib/oss/modules/sndshield will taint the kernel: non-GPL license - LGPL
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module sndshield loaded, with warnings
sndshield loaded OK
Warning: loading /usr/lib/oss/modules/soundbase will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module soundbase loaded, with warnings
soundbase loaded OK
Warning: loading /usr/lib/oss/modules/ac97 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ac97 loaded, with warnings
ac97 loaded OK
Warning: loading /usr/lib/oss/modules/pnp will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module pnp loaded, with warnings
pnp loaded OK
Warning: loading /usr/lib/oss/modules/via8233 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module via8233 loaded, with warnings
via8233 loaded OK

********************************************************************
* You can safely ignore the above message about tainting the kernel.
* It is completely political and means just that the maintainers of
* of modutils package dislike software that is not distributed under
* an open source license.
********************************************************************

Module loading finished.
==== About to start the driver using the following config ===
# Use soundconf to edit this file.
/SECUREAUDIO OFF
/PCIIRQ 10
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI30591106 #VIA VT8233 AC97 audio
VIA8233 ON
++ pnpres.dat ++
++++
OSS/Linux 3.9.7h (C) 4Front Technologies 1996-2002

License serial number: N02753959
Drivers: ALL
This copy of OSS is licensed to UNION

Build: 2.4.20-8

Card config:
VIA 8233 AC97 audio controller at 0xe100 irq 10

Audio devices:
0: VT8233 (DUPLEX)
1: VT8233 (playback only)
2: OSS Virtual Mixer v2.5 Playback CH #0 (GRC2)
3: OSS Virtual Mixer v2.5 Playback CH #1 (GRC2)
4: OSS Virtual Mixer v2.5 Playback CH #2 (GRC2)
5: OSS Virtual Mixer v2.5 Playback CH #3 (GRC2)

Synth devices:
0: OSS Virtual Synth v2.5

Midi devices:

Timers:
0: System clock
1: SoftOSS

Mixers:
0: VT8233 (CXT29/0x43585429)
1: Virtual Mixer


++++
crw-rw-rw-    1 root     root      14,   3  1月 30 18:24 /dev/dsp
crw-rw-rw-    1 root     root      14,   3  5月 23 19:07 /dev/dsp0
crw-rw-rw-    1 root     root      14,  19  1月 30 18:24 /dev/dsp1
crw-rw-rw-    1 root     root      14, 163  5月 23 19:07 /dev/dsp10
crw-rw-rw-    1 root     root      14, 179  5月 23 19:07 /dev/dsp11
crw-rw-rw-    1 root     root      14, 195  5月 23 19:07 /dev/dsp12
crw-rw-rw-    1 root     root      14, 211  5月 23 19:07 /dev/dsp13
crw-rw-rw-    1 root     root      14, 227  5月 23 19:07 /dev/dsp14
crw-rw-rw-    1 root     root      14, 243  5月 23 19:07 /dev/dsp15
crw-rw-rw-    1 root     root      14,  35  5月 23 19:07 /dev/dsp2
crw-rw-rw-    1 root     root      14,  51  5月 23 19:07 /dev/dsp3
crw-rw-rw-    1 root     root      14,  67  5月 23 19:07 /dev/dsp4
crw-rw-rw-    1 root     root      14,  83  5月 23 19:07 /dev/dsp5
crw-------    1 root     root      55,   0  1月 30 18:24 /dev/dsp56k
crw-rw-rw-    1 root     root      14,  99  5月 23 19:07 /dev/dsp6
crw-rw-rw-    1 root     root      14, 115  5月 23 19:07 /dev/dsp7
crw-rw-rw-    1 root     root      14, 131  5月 23 19:07 /dev/dsp8
crw-rw-rw-    1 root     root      14, 147  5月 23 19:07 /dev/dsp9
lrwxrwxrwx    1 root     root           10  5月 23 19:07 /dev/dspW -> /dev/dspW0
crw-rw-rw-    1 root     root      14,   5  5月 23 19:07 /dev/dspW0
crw-rw-rw-    1 root     root      14,  21  5月 23 19:07 /dev/dspW1
crw-rw-rw-    1 root     root      14, 165  5月 23 19:07 /dev/dspW10
crw-rw-rw-    1 root     root      14, 181  5月 23 19:07 /dev/dspW11
crw-rw-rw-    1 root     root      14, 197  5月 23 19:07 /dev/dspW12
crw-rw-rw-    1 root     root      14, 213  5月 23 19:07 /dev/dspW13
crw-rw-rw-    1 root     root      14, 229  5月 23 19:07 /dev/dspW14
crw-rw-rw-    1 root     root      14, 245  5月 23 19:07 /dev/dspW15
crw-rw-rw-    1 root     root      14,  37  5月 23 19:07 /dev/dspW2
crw-rw-rw-    1 root     root      14,  53  5月 23 19:07 /dev/dspW3
crw-rw-rw-    1 root     root      14,  69  5月 23 19:07 /dev/dspW4
crw-rw-rw-    1 root     root      14,  85  5月 23 19:07 /dev/dspW5
crw-rw-rw-    1 root     root      14, 101  5月 23 19:07 /dev/dspW6
crw-rw-rw-    1 root     root      14, 117  5月 23 19:07 /dev/dspW7
crw-rw-rw-    1 root     root      14, 133  5月 23 19:07 /dev/dspW8
crw-rw-rw-    1 root     root      14, 149  5月 23 19:07 /dev/dspW9
++++ dmesg printout follows ++++
Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000015ff0000 (usable)
BIOS-e820: 0000000015ff0000 - 0000000015ffffc0 (ACPI data)
BIOS-e820: 0000000015ffffc0 - 0000000016000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
351MB LOWMEM available.
On node 0 totalpages: 90096
zone(0): 4096 pages.
zone(1): 86000 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 1395.678 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2785.28 BogoMIPS
Memory: 349824k/360384k available (1347k kernel code, 7996k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xe8964, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3074] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hdaMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdcMA, hdd:pio
hda: TOSHIBA MK4018GAP, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: QSI DVD-ROM SDR-083, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78140160 sectors (40008 MB), CHS=4864/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 83k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:59:01 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1200, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0x1300, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0x1700, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:11.2-2, assigned address 2
input0: USB HID v1.00 Mouse [05e3:1205] on usb1:2.0
Adding Swap: 393552k swap-space (priority -1)
ohci1394: $Rev: 693 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[f0000000-f00007ff]  Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023]  GUID[00c09f000005b763]  [Linux OHCI-1394]
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xd688b000, 00:c0:9f:15:fb:3a, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Enabling device 00:0a.0 (0080 -> 0082)
PCI: Enabling device 00:0a.1 (0080 -> 0082)
Yenta IRQ list 00b8, PCI irq11
Socket status: 30000006
spurious 8259A interrupt: IRQ7.
Yenta IRQ list 00b8, PCI irq9
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: console ready
ide-floppy driver 0.99.newide
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
Via 686a/8233/8235 audio driver 1.9.1-ac2
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Modem codec, id: CXT41 (Unknown)
via82cxxx: board #1 at 0xE100, IRQ 10
cdrom: This disc doesn't have any tracks I recognize!
OssProbe: 0
++++++++
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. P4M266 Host Bridge (rev 0).
      Master Capable.  Latency=128.  
      Prefetchable 32 bit memory at 0xa0000000 [0xa3ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (rev 0).
      Master Capable.  No bursts.  Min Gnt=8.
  Bus  0, device  10, function  0:
    CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 1).
      IRQ 11.
      Master Capable.  Latency=168.  Min Gnt=128.Max Lat=5.
      Non-prefetchable 32 bit memory at 0x16000000 [0x16000fff].
  Bus  0, device  10, function  1:
    CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (#2) (rev 1).
      IRQ 9.
      Master Capable.  Latency=168.  Min Gnt=128.Max Lat=5.
      Non-prefetchable 32 bit memory at 0x16001000 [0x16001fff].
  Bus  0, device  12, function  0:
    FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (rev 0).
      IRQ 10.
      Master Capable.  Latency=128.  Min Gnt=2.Max Lat=4.
      Non-prefetchable 32 bit memory at 0xf0000000 [0xf00007ff].
      Non-prefetchable 32 bit memory at 0xf0004000 [0xf0007fff].
  Bus  0, device  13, function  0:
    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
      IRQ 10.
      Master Capable.  Latency=128.  Min Gnt=32.Max Lat=64.
      I/O at 0xe000 [0xe0ff].
      Non-prefetchable 32 bit memory at 0xf0008000 [0xf00080ff].
  Bus  0, device  17, function  0:
    ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge (rev 0).
  Bus  0, device  17, function  1:
    IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6).
      Master Capable.  Latency=64.  
      I/O at 0x1100 [0x110f].
  Bus  0, device  17, function  2:
    USB Controller: VIA Technologies, Inc. USB (rev 35).
      IRQ 10.
      Master Capable.  Latency=22.  
      I/O at 0x1200 [0x121f].
  Bus  0, device  17, function  3:
    USB Controller: VIA Technologies, Inc. USB (#2) (rev 35).
      IRQ 10.
      Master Capable.  Latency=22.  
      I/O at 0x1300 [0x131f].
  Bus  0, device  17, function  4:
    USB Controller: VIA Technologies, Inc. USB (#3) (rev 35).
      IRQ 10.
      Master Capable.  Latency=22.  
      I/O at 0x1700 [0x171f].
  Bus  0, device  17, function  5:
    Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 48).
      IRQ 10.
      I/O at 0xe100 [0xe1ff].
  Bus  0, device  17, function  6:
    Communication controller: VIA Technologies, Inc. AC97 Modem Controller (rev 112).
      IRQ 10.
      I/O at 0xe200 [0xe2ff].
  Bus  1, device   0, function  0:
    VGA compatible controller: S3 Inc. VT8751 [ProSavageDDR P4M266] VGA Controller (rev 0).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=4.Max Lat=255.
      Non-prefetchable 32 bit memory at 0xe0000000 [0xe007ffff].
      Prefetchable 32 bit memory at 0x90000000 [0x97ffffff].
processor        : 0
vendor_id        : GenuineIntel
cpu family        : 15
model                : 2
model name        : Intel(R) Pentium(R) 4 CPU 1.40GHz
stepping        : 4
cpu MHz                : 1395.678
cache size        : 512 KB
fdiv_bug        : no
hlt_bug                : no
f00f_bug        : no
coma_bug        : no
fpu                : yes
fpu_exception        : yes
cpuid level        : 2
wp                : yes
flags                : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 2785.28

++++
           CPU0      
  0:     273098          XT-PIC  timer
  1:       1658          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
  9:          1          XT-PIC  O2 Micro, Inc. OZ6933 Cardbus Controller (#2)
10:      68219          XT-PIC  usb-uhci, usb-uhci, usb-uhci, ohci1394, eth0, 8233 audio
11:          6          XT-PIC  O2 Micro, Inc. OZ6933 Cardbus Controller
12:         42          XT-PIC  PS/2 Mouse
14:      26317          XT-PIC  ide0
15:       5385          XT-PIC  ide1
NMI:          0
ERR:          3
发表于 2003-5-23 21:16:06 | 显示全部楼层

我又重装了一次,还是没有声音

上面的内容是这次装完后的,这次很顺利地装完了,但是还是没有声音!  北南南北大哥,求救了呀! 一定救我!

我都决定放弃MS了,它们反D越来越凶了呀,好可恨!
可是要是我彻底的放弃了,我连听歌都听不成了!

没声,再好的戏也出不来呀!

偶现在的桌面好PP呀,可就是没有声音!
发表于 2003-5-23 21:32:54 | 显示全部楼层
http://havardk.xmms.org/dist/xmm ... 3-1.2.7-21.i386.rpm

用xmms来测试一下,这个补丁打过了吗??
发表于 2003-5-23 21:39:57 | 显示全部楼层

这个补丁也打了,

不光是放音乐没有声,而是声卡就不发声呀!  

有个兄弟说把孔换一个插,我也试了用了,还是不行,

我试了alsa的所有版本,都不行,

装RH8我连显卡都找不到,下午又装RH8试,结果连进X都进不了,
没办法,只好又装了个新的RH9,一路配下来,很顺,但就是没有声!


加我的MSN吧,那样,然后我把IP给你,我把TELNET打开,你可以上来看看呀
发表于 2003-5-23 21:45:30 | 显示全部楼层
不光是放音乐没有声,而是声卡就不发声呀!


是不是用sndconfig来测试声卡的发声?是绝不能用这个工具来测试!!!

一定要用xmms来测试声卡。。

找一个MP3的文件,来测试,要设置xmms的插件为oss的。
发表于 2003-5-23 21:47:23 | 显示全部楼层
是呀,没敢用系统的来测,这个我可是记得很清,我装完就装了xmms的补丁,然后来打开一个MP3 ,然后看到声谱在跳 ,进度在进,就是没有声音!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表