问题：在X窗口下，按ctrl+alt+back sapce不能重起x，系统关机。怎么回事？

cyhwy

我的系统是mandrake9.1
主板为sis芯片

但是，在其他linux下，就可以，怎么回事？？？如何解决？

cyhwy

另外,我发现,开机,在运行到 NTloader  选单时
(我装的是多系统,win98  win2000  mandrake9.1  debian,使用windows2000的引导程序引导多系统)
按ctrl+alt+back sapce，系统关机

网上说是sis芯片的事.
可是,为什么进入win98 /win2000/debian  按ctrl+alt+back sapce都没事???
单单进入mandrake9.1  不行???

如何修改???

cyhwy

经过多次实验，原来原因是bios把ctrl+alt+back sapce认作关机键了，在cmos里将按下关机键设置为休眠，那么，按ctrl+alt+back sapce，系统就休眠。

高手，应该如何解决，为什么其他操作系统不受影响？？？
我想把mandrake9.1里热键ctrl+alt+back sapce改为其他，比如：ctrl+alt+win如何更改？？？？

cyhwy

问题：在X窗口下，按ctrl+alt+back sapce不能重起x，系统关机。怎么回事？
详情见http://www.linuxsir.cn/bbs/showthread.php?t=212620

daha

和我这里情况一样，一直都解决不了，redhat9.0和 slackware10.1 都是这样

是不是sis730的精英主板？本人的k7sem 主板，这主板的关机快捷键就是Ctrl+Alt+Del,说明书里面有。不仅在linux下有问题，win下的休眠功能也有问题，据说这是该主板电源管理上的bug , 可惜没有官方BIOS可以下载。



刚刚找到，你看看
http://www.ecs.com.tw/ECSWeb/Index....nuID=19&LanID=2

注意pcb版本，这是1.0的

daha

刚刚找到，你看看
http://www.ecs.com.tw/ECSWeb/Index.aspx?MenuID=19&LanID=2

注意pcb版本，这是1.0的

cyhwy

我的是微星645Ultra主板,bios已升级到最新,sis645/sis961芯片
我这knoippix就可以使用ctrl+alt+back sapce,因此,通过软件也可以解决这个硬件问题

问题的关键是bios把ctrl+alt+back sapce健看作是主机箱上的关机按钮,所以,操作系统内只要屏蔽bios的关机中断即可.

cyhwy

看这位外国老兄同样的问题:

Alex Bennee wrote:
> On Wed, 2002-12-04 at 12:38, XI wrote:
>
>>Alex Bennee wrote:
>>
>>>Hi,
>>>
>>>I've been running into problems with my machine locking up in X but
>>>however I have been unable to diagnose it because the Ctrl-Alt-Backspace
>>>key sequence kills my whole machine (i.e. powers it down).
>>>
>>>I've done some searching on google but haven't been able to find any
>>>references except a one errata note for Mandrake that mentions disabling
>>>the APIC which I tried and had no effect.
>>>
>>>The Ctrl-Alt-Backspace sequence will power down my machine at any point
>>>(BIOS Self-test, Grub, Console mode or X) but doesn't to it once Windows
>>>is running. I have a suspicion that this is ACPI related but even with
>>>acpi=off and apm=off flags is can still stop the box which can't be
>>>right. Any pointers? I stand ready to provide any additional data.
>>>
>>
>>Hi,
>>I have a P.C. with short-cut CTRL+ALT+BACKSPACE to shutdown in bios. I
>>can't find how to disable it, and I don't know if it works under windoze.
>>I think you have the same kind of stupid bios. no?
>
>
> The machine is a Fujitsu/Siemens based around the GA-8STXCFS motherboard
> running the latest Award BIOS 6.0PG. And yes, there is no option to
> actually disable ACPI, just change modes for S1 to S3 (shutdown vs
> suspend to RAM IIRC).
>
> What machine have you got? Do you also experience lockups in X because
> I'm wondering if the 2 are related.
>
>


Hi,
I can't remember the brand and the model of the motherboard, but it is
based on a SIS chipset. (the machine is at 1000km over). The machine
isn't a Fujitsu, it's a "no name" machine.


I didn't remember any X lookup, I was running a mdk8.1, the machine is
quite stable.


Xavier


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

daha

Post by cyhwy
我的是微星645Ultra主板,bios已升级到最新,sis645/sis961芯片
我这knoippix就可以使用ctrl+alt+back sapce,因此,通过软件也可以解决这个硬件问题

问题的关键是bios把ctrl+alt+back sapce健看作是主机箱上的关机按钮,所以,操作系统内只要屏蔽bios的关机中断即可.

不如试试看knoppix的内核？如果是内核的问题，再研究内核的说明文档

我的linux刚刚挂了 ，不然我也要试试

cyhwy

可以肯定,是内核的问题

在mandrake9.1的内核,没有屏蔽bios中断

问题是,换内核太麻烦,容易引起不稳定,我想能不能改一下XFree86的快捷键,将ctrl+alt+backspace改为
ctrl+win+alt

这样,就避免了与bios的冲突,问题就解决了,

但我不知道如何改  X的快捷键...