|
|
已解决
方法是FF>编辑>首选项>字体&颜色 中
将等宽字体设置成tahoma
我用的是simsun+tahoma
但是我还是想问这个一个字母占两个位置的问题应该叫什么问题?
实在不知道这个问题怎么描述
就帖张图来看
请大家帮帮忙吧
这个应该是叫什么问题呢?
下面是我的fonts.conf
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<!-- /etc/fonts/fonts.conf file to configure system font access -->
<fontconfig>
<!--
DO NOT EDIT THIS FILE.
IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.
LOCAL CHANGES BELONG IN 'local.conf'.
The intent of this standard configuration file is to be adequate for
most environments. If you have a reasonably normal environment and
have found problems with this configuration, they are probably
things that others will also want fixed. Please submit any
problems to the fontconfig bugzilla system located at fontconfig.org
Note that the normal 'make install' procedure for fontconfig is to
replace any existing fonts.conf file with the new version. Place
any local customizations in local.conf which this file references.
Keith Packard
-->
<!-- Font directory list -->
<dir>/usr/share/fonts</dir>
<dir>/usr/X11R6/lib/X11/fonts</dir> <dir>/usr/local/share/fonts</dir>
<dir>~/.fonts</dir>
<!--
Accept deprecated 'mono' alias, replacing it with 'monospace'
-->
<match target="pattern">
<test qual="any" name="family">
<string>mono</string>
</test>
<edit name="family" mode="assign">
<string>monospace</string>
</edit>
</match>
<!--
Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'
-->
<match target="pattern">
<test qual="any" name="family">
<string>sans serif</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>
<!--
Accept deprecated 'sans' alias, replacing it with 'sans-serif'
-->
<match target="pattern">
<test qual="any" name="family">
<string>sans</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>
<!--
Mark common families with their generics so we'll get
something reasonable
-->
<!--
Serif faces
-->
<alias>
<family>Tahoma</family>
<family>SimSun</family>
<family>Bitstream Vera Serif</family>
<family>Times New Roman</family>
<family>Thorndale AMT</family>
<family>Times</family>
<family>Nimbus Roman No9 L</family>
<family>Luxi Serif</family>
<family>Kochi Mincho</family>
<family>AR PL SungtiL GB</family>
<family>AR PL Mingti2L Big5</family>
<family>ＭＳ 明朝</family>
<family>Baekmuk Batang</family>
<family>FreeSerif</family>
<default><family>serif</family></default>
</alias>
<!--
Sans-serif faces
-->
<alias>
<family>Tahoma</family>
<family>SimSun</family>
<family>Bitstream Vera Sans</family>
<family>Helvetica</family>
<family>Arial</family>
<family>Verdana</family>
<family>Albany AMT</family>
<family>Nimbus Sans L</family>
<family>Luxi Sans</family>
<family>Kochi Gothic</family>
<family>AR PL KaitiM GB</family>
<family>AR PL KaitiM Big5</family>
<family>ＭＳ ゴシック</family>
<family>Baekmuk Dotum</family>
<family>FreeSans</family>
<default><family>sans-serif</family></default>
</alias>
<!--
Monospace faces
-->
<alias>
<family>Bitstream Vera Sans Mono</family>
<family>NSimSun</family>
<family>SimSun</family>
<family>Courier</family>
<family>Courier New</family>
<family>Andale Mono</family>
<family>Luxi Mono</family>
<family>Cumberland AMT</family>
<family>Nimbus Mono L</family>
<family>FreeMono</family>
<default><family>monospace</family></default>
</alias>
<!--
If the font still has no generic name, add sans-serif
-->
<match target="pattern">
<test qual="all" name="family" compare="not_eq">
<string>sans-serif</string>
</test>
<test qual="all" name="family" compare="not_eq">
<string>serif</string>
</test>
<test qual="all" name="family" compare="not_eq">
<string>monospace</string>
</test>
<edit name="family" mode="append_last">
<string>sans-serif</string>
</edit>
</match>
<!--
URW provides metric and shape compatible fonts for these 3 Adobe families.
-->
<alias>
<family>Times</family>
<accept><family>Nimbus Roman No9 L</family></accept>
</alias>
<alias>
<family>Helvetica</family>
<accept><family>Nimbus Sans L</family></accept>
</alias>
<alias>
<family>Courier</family>
<accept><family>Nimbus Mono L</family></accept>
</alias>
<!--
AMT provides metric and shape compatible fonts for these three web font
families.
-->
<alias>
<family>Times New Roman</family>
<accept><family>Thorndale AMT</family></accept>
</alias>
<alias>
<family>Arial</family>
<accept><family>Albany AMT</family></accept>
</alias>
<alias>
<family>Courier New</family>
<accept><family>Cumberland AMT</family></accept>
</alias>
<!--
Some Asian fonts misadvertise themselves as monospaced when
in fact they are dual-spaced (half and full). This makes
FreeType very confused as it forces all widths to match.
Undo this magic by disabling the width forcing code -->
<match target="font">
<test name="family"><string>GulimChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<match target="font">
<test name="family"><string>DotumChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<match target="font">
<test name="family"><string>BatangChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<match target="font">
<test name="family"><string>GungsuhChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<!--
The Bitstream Vera fonts have GASP entries suggesting that hinting be
disabled below 8 ppem, but FreeType ignores those, preferring to use
the data found in the instructed hints. The initial Vera release
didn't include the right instructions in the 'prep' table. Fix this
by disabling hinting manually at smaller sizes (< 8ppem)
-->
<match target="font">
<test name="family">
<string>Bitstream Vera Sans</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test name="family">
<string>Bitstream Vera Serif</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test name="family">
<string>Bitstream Vera Sans Mono</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
<!--
Load per-user customization file
-->
<include ignore_missing="yes">~/.fonts.conf</include>
<!--
Load local system customization file
-->
<include ignore_missing="yes">conf.d</include>
<include ignore_missing="yes">local.conf</include>
<!--
Provide required aliases for standard names
-->
<alias>
<family>serif</family>
<prefer>
<family>Tahoma</family>
<family>SimSun</family>
<family>Bitstream Vera Serif</family>
<family>Times New Roman</family>
<family>Thorndale AMT</family>
<family>Luxi Serif</family>
<family>Nimbus Roman No9 L</family>
<family>Times</family>
<family>Frank Ruehl</family>
<family>Kochi Mincho</family>
<family>AR PL SungtiL GB</family>
<family>AR PL Mingti2L Big5</family>
<family>ＭＳ 明朝</family>
<family>Baekmuk Batang</family>
<family>FreeSerif</family>
</prefer>
</alias>
<alias>
<family>sans-serif</family>
<prefer>
<family>Tahoma</family>
<family>SimSun</family>
<family>Bitstream Vera Sans</family>
<family>Verdana</family>
<family>Arial</family>
<family>Albany AMT</family>
<family>Luxi Sans</family>
<family>Nimbus Sans L</family>
<family>Helvetica</family>
<family>Nachlieli</family>
<family>Kochi Gothic</family>
<family>AR PL KaitiM GB</family>
<family>AR PL KaitiM Big5</family>
<family>ＭＳ ゴシック</family>
<family>Baekmuk Dotum</family>
<family>FreeSans</family>
</prefer>
</alias>
<alias>
<family>monospace</family>
<prefer>
<family>Bitstream Vera Sans Mono</family>
<family>NSimSun</family>
<family>SimSun</family>
<family>Andale Mono</family>
<family>Courier New</family>
<family>Cumberland AMT</family>
<family>Luxi Mono</family>
<family>Nimbus Mono L</family>
<family>Courier</family>
<family>Miriam Mono</family>
<family>Kochi Gothic</family>
<family>AR PL KaitiM GB</family>
<family>Baekmuk Dotum</family>
<family>FreeMono</family>
</prefer>
</alias>
<!--
Artificial oblique for fonts without an italic or oblique version
-->
<match target="font">
<!-- check to see if the font is roman -->
<test name="slant">
<const>roman</const>
</test>
<!-- check to see if the pattern requested non-roman -->
<test target="pattern" name="slant" compare="not_eq">
<const>roman</const>
</test>
<!-- multiply the matrix to slant the font -->
<edit name="matrix" mode="assign">
<times>
<name>matrix</name>
<matrix><double>1</double><double>0.2</double>
<double>0</double><double>1</double>
</matrix>
</times>
</edit>
<!-- pretend the font is oblique now -->
<edit name="slant" mode="assign">
<const>oblique</const>
</edit>
</match>
<!-- 下面这个 march 部分是是给液晶显示器用的，如果你的显示器不是液晶的话，可以注释掉
如果注释掉后你的字体显示不正常，那么再加上 -->
<match target="font">
<test qual="all" name="rgba"><const>unknown</const></test>
<edit name="rgba" mode="assign"><const>rgb</const></edit>
</match>
<!-- 如果字体是粗体的话，就用粗体来显示它，要让这个起作用，需要后面的补丁 -->
<match target="font">
<test compare="more" target="pattern" name="weight"><const>medium</const></test>
<edit mode="assign" name="weight"><const>bold</const></edit>
</match>
<!-- 下面这段可以解决浏览网页时的缺字现像，如果你没出现缺字，加上也没有关系
<match target="font">
<test name="pixelsize" compare="more_eq"><int>7</int></test>
<test name="pixelsize" compare="less_eq"><int>19</int></test>
<edit name="render" mode="assign"><bool>false</bool></edit>
</match>
-->
<!--如果字体是simsun，tahoma或者是verdana,并且大小在7号和19号之间的话，打开微调，并且不使用antialias
有时候不打开hinting(微调)的话，字体的锯齿现像比较严重，关闭AA是就是不要那种模模糊糊的，有点发亮的
那种字体，至少在我的液晶显示器上是这样的 -->
<match target="font">
<test qual="any" name="family">
<string>SimSun</string>
<string>Tahoma</string>
<string>Verdana</string>
</test>
<test name="size" compare="more_eq"><int>7</int></test>
<test name="size" compare="less_eq"><int>19</int></test>
<edit name="antialias" mode="assign"><bool>false</bool></edit>
<edit name="hinting" mode="assign"><bool>true</bool></edit>
</match>
<!--
Synthetic emboldening for fonts that do not have bold face available
-->
<match target="font">
<!-- check to see if the font is just regular -->
<test name="weight" compare="less_eq">
<int>100</int>
</test>
<!-- check to see if the pattern requests bold -->
<test target="pattern" name="weight" compare="more_eq">
<int>200</int>
</test>
<!-- set the embolden flag -->
<edit name="embolden" mode="assign">
<bool>true</bool>
</edit>
</match>
<config>
<!--
These are the default Unicode chars that are expected to be blank
in fonts. All other blank chars are assumed to be broken and
won't appear in the resulting charsets
-->
<blank>
<int>0x0020</int> <!-- SPACE -->
<int>0x00A0</int> <!-- NO-BREAK SPACE -->
<int>0x00AD</int> <!-- SOFT HYPHEN -->
<int>0x034F</int> <!-- COMBINING GRAPHEME JOINER -->
<int>0x0600</int> <!-- ARABIC NUMBER SIGN -->
<int>0x0601</int> <!-- ARABIC SIGN SANAH -->
<int>0x0602</int> <!-- ARABIC FOOTNOTE MARKER -->
<int>0x0603</int> <!-- ARABIC SIGN SAFHA -->
<int>0x06DD</int> <!-- ARABIC END OF AYAH -->
<int>0x070F</int> <!-- SYRIAC ABBREVIATION MARK -->
<int>0x115F</int> <!-- HANGUL CHOSEONG FILLER -->
<int>0x1160</int> <!-- HANGUL JUNGSEONG FILLER -->
<int>0x1680</int> <!-- OGHAM SPACE MARK -->
<int>0x17B4</int> <!-- KHMER VOWEL INHERENT AQ -->
<int>0x17B5</int> <!-- KHMER VOWEL INHERENT AA -->
<int>0x180E</int> <!-- MONGOLIAN VOWEL SEPARATOR -->
<int>0x2000</int> <!-- EN QUAD -->
<int>0x2001</int> <!-- EM QUAD -->
<int>0x2002</int> <!-- EN SPACE -->
<int>0x2003</int> <!-- EM SPACE -->
<int>0x2004</int> <!-- THREE-PER-EM SPACE -->
<int>0x2005</int> <!-- FOUR-PER-EM SPACE -->
<int>0x2006</int> <!-- SIX-PER-EM SPACE -->
<int>0x2007</int> <!-- FIGURE SPACE -->
<int>0x2008</int> <!-- PUNCTUATION SPACE -->
<int>0x2009</int> <!-- THIN SPACE -->
<int>0x200A</int> <!-- HAIR SPACE -->
<int>0x200B</int> <!-- ZERO WIDTH SPACE -->
<int>0x200C</int> <!-- ZERO WIDTH NON-JOINER -->
<int>0x200D</int> <!-- ZERO WIDTH JOINER -->
<int>0x200E</int> <!-- LEFT-TO-RIGHT MARK -->
<int>0x200F</int> <!-- RIGHT-TO-LEFT MARK -->
<int>0x2028</int> <!-- LINE SEPARATOR -->
<int>0x2029</int> <!-- PARAGRAPH SEPARATOR -->
<int>0x202A</int> <!-- LEFT-TO-RIGHT EMBEDDING -->
<int>0x202B</int> <!-- RIGHT-TO-LEFT EMBEDDING -->
<int>0x202C</int> <!-- POP DIRECTIONAL FORMATTING -->
<int>0x202D</int> <!-- LEFT-TO-RIGHT OVERRIDE -->
<int>0x202E</int> <!-- RIGHT-TO-LEFT OVERRIDE -->
<int>0x202F</int> <!-- NARROW NO-BREAK SPACE -->
<int>0x205F</int> <!-- MEDIUM MATHEMATICAL SPACE -->
<int>0x2060</int> <!-- WORD JOINER -->
<int>0x2061</int> <!-- FUNCTION APPLICATION -->
<int>0x2062</int> <!-- INVISIBLE TIMES -->
<int>0x2063</int> <!-- INVISIBLE SEPARATOR -->
<int>0x206A</int> <!-- INHIBIT SYMMETRIC SWAPPING -->
<int>0x206B</int> <!-- ACTIVATE SYMMETRIC SWAPPING -->
<int>0x206C</int> <!-- INHIBIT ARABIC FORM SHAPING -->
<int>0x206D</int> <!-- ACTIVATE ARABIC FORM SHAPING -->
<int>0x206E</int> <!-- NATIONAL DIGIT SHAPES -->
<int>0x206F</int> <!-- NOMINAL DIGIT SHAPES -->
<int>0x3000</int> <!-- IDEOGRAPHIC SPACE -->
<int>0x3164</int> <!-- HANGUL FILLER -->
<int>0xFEFF</int> <!-- ZERO WIDTH NO-BREAK SPACE -->
<int>0xFFA0</int> <!-- HALFWIDTH HANGUL FILLER -->
<int>0xFFF9</int> <!-- INTERLINEAR ANNOTATION ANCHOR -->
<int>0xFFFA</int> <!-- INTERLINEAR ANNOTATION SEPARATOR -->
<int>0xFFFB</int> <!-- INTERLINEAR ANNOTATION TERMINATOR -->
</blank>
<!--
Rescan configuration every 30 seconds when FcFontSetList is called
-->
<rescan>
<int>30</int>
</rescan>
</config>
</fontconfig> |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册
x
|
IP卡
狗仔卡
发表于 2005-8-29 02:06:11
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主