|
|
发表于 2006-6-1 21:05:08
|
显示全部楼层
我在装了FC5后想转WRF，安装pgi6.1-4(以前用pgi6.0)出现 ERROR: unknown glibc version (2.4),
仔细检查发现是脚本安装文件makelocalrc的问题于系统无关. 于是修改makelocarc，主要在66，267行附近，314行附近的改动是为了解决安装错误 ： /usr/pgi/linux86/6.1/bin/makelocalrc: line 315: =安装： / u sr/l ib/gcc/i386-re dhat- linux/4.1.0/: 没有那个文件或目 录.
修改后的makelocalrc如下（修改部分已用整行长注释条标出）：
#! /bin/sh
##
## Copyright 1990-2000, The Portland Group, Incorporated.
## Copyright 2000-2005, STMicroelectronics, Incorporated.
## All rights reserved.
##
## STMICROELECTRONICS, INCORPORATED PROPRIETARY INFORMATION
## This software is supplied under the terms of a license agreement
## or nondisclosure agreement with STMicroelectronics and may not be
## copied or disclosed except in accordance with the terms of that
## agreement.
##
# Just in case
PATH=/usr/bin:/bin PATH
TMPDIR=${TMPDIR:-/tmp}
usage() {
echo "Usage: $0 [-x|-n] installdir"
echo
echo "Example: $0 -x /usr/pgi/linux86/6.1"
quit 1
}
quit() {
# Cleanup scratch files.
rm -rf $scratch
exit $1
}
copy_files() {
# $1 is source dir, $2 is destination dir
if test -n "$1"; then
if test -d "$1"; then
if test ! -d $2 ; then
mkdir $2
fi
( cd $1 ; tar cf - * | ( cd $2; tar xpf - ))
fi
fi
}
pretty_print() {
echo $@ | awk -F^ '{printf("%20-s %s\n",$1,$2);}'
}
print_line() {
echo $1 $2 $3 $4 $5 $6 >> $newrc
}
get_glibc_version() {
# Determine the GNU LIBC version.
if test -r /lib64/libc.so.6 ; then
LIBC=/lib64/libc.so.6 # should only exist on a 64-bit Linux OS.
elif test -r /lib/libc.so.6 ; then
LIBC=/lib/libc.so.6 # should exist on any Linux OS.
else
echo "ERROR: /lib/libc.so.6: not found or no read permission"
quit
fi
x=`strings $LIBC | grep 'GNU C Library' | cut -d, -f1 | awk '{print $7}'`
if test -n "$x" ; then
#########################################################################################
GLIBC_VERSION=2.4.4 ##原来是"$x"
else
GLIBC_VERSION=2.4.4 ##原来是空的
########################################################################################
fi
unset x
return
}
get_linker_version() {
x=`grep collect2 $out | sed q | sed -e 's/.* -dynamic-linker //' -e 's/ .*//'`
if test -n "$x" ; then
LINKER=$x
else
LINKER=
fi
unset x
return
}
get_specs_file() {
# This command pipeline should be I18N-capable.
x=`awk '/gcc.*specs/ {print $NF}' $out`
if test -n "$x" ; then
SPECSFILE=$x
else
SPECSFILE=
fi
unset x
return
}
# Stop if not Linux.
opsys=`uname -s | tr '[A-Z]' '[a-z]'`
if test "$opsys" != "linux" ; then
echo
echo "$0: `uname -n` is not running Linux"
quit 1
fi
pgi50=1
noexec=1
ofile=0
use_pthreads=1
no_m32_support=0
check_crt_files=0
set_hammer_empty=0
gcc=gcc
g77=g77
scratch=$TMPDIR/PGI-INSTALL.$$
if test ! -d $scratch ; then
mkdir $scratch
fi
while test -n "$1"; do
case $1 in
-n ) noexec=1 ;;
-x ) noexec=0 ;;
-o ) ofile=1 ; noexec=0 ;;
-gcc ) shift; gcc=$1 ;;
-g77 ) shift; g77=$1 ;;
* ) start=$1 ;;
esac
shift
done
if test -z "$start" ; then
usage
fi
if test ! -d $start ; then
echo "$0: $start: directory not found"
usage
fi
if test "$start" = "." ; then
start=`pwd`
fi
if test "$pgi50" -eq 1 ; then
# Example: 5.0 and above:
# start = /usr/pgi/linux86/5.0
# installdir = /usr/pgi/linux86
# version = 5.0
# base = /usr/pgi/linux86/5.0
# target = linux86
installdir=`dirname $start`
version=`basename $start`
base=$start
target=`basename $installdir`
else
# Example: 4.1 and below:
# start = /usr/pgi
# installdir = /usr/pgi
# base = /usr/pgi/linux
# version = 5.0
# target = linux86
installdir=$start
version=`cat $start/.release`
base=$start/linux86
target="linux86"
fi
# Define target-specific options needed below.
arch=`uname -m`
case "${target}{arch}" in
linux86:x86_64 )
gccopt="-o $scratch/a.out -m32 -v"
g77opt=$gccopt
subdir="/32"
check_crt_files=1
use_64bit_rcfiles=11
install_64_bit=0
lib=/lib
usrlib=/usr/lib
;;
linux86:* )
set_hammer_empty=1
gccopt="-o $scratch/a.out -v"
g77opt=$gccopt
use_64bit_rcfiles=10
install_64_bit=0
lib=/lib
usrlib=/usr/lib
;;
linux86-64:x86_64 )
gccopt="-o $scratch/a.out -v"
g77opt=$gccopt
lib=/lib64
usrlib=/usr/lib64
install_64_bit=1
use_64bit_rcfiles=0
;;
linux86-64:* )
echo "ERROR: target doesn't match architecture"
exit 1
;;
esac
localrc=$base/bin/localrc
newrc=$scratch/localrc.$$
# Find the version of GLIBC used on this system so that the appropriate
# files are copied from lib-linux86-g* to lib and/or liblf.
LIBC=$lib/libc.so.6
if test ! -f $LIBC ; then
echo "ERROR: file $LIBC: not found."
quit 1
fi
get_glibc_version # sets GLIBC_VERSION
case "$GLIBC_VERSION" in
2.3.* )
glibc=232
LIB=$base/lib-linux86-g232
LIBLF=$LIB-lf
INC=$base/include-g23
;;
2.2.9* )
glibc=2293
LIB=$base/lib-linux86-g2293
LIBLF=$LIB-lf
INC=$base/include-g222
;;
2.2.5 )
glibc=225
LIB=$base/lib-linux86-g225
LIBLF=$LIB-lf
INC=$base/include-g222
;;
2.2.4 )
glibc=224
LIB=$base/lib-linux86-g224
LIBLF=$LIB-lf
INC=$base/include-g222
;;
2.2.2 )
glibc=222
LIB=$base/lib-linux86-g22
LIBLF=$LIB-lf
INC=$base/include-g222
;;
2.1.9* | 2.2*)
glibc=22
LIB=$base/lib-linux86-g22
LIBLF=$LIB-lf
INC=$base/include-g22
;;
2.1.[23] )
glibc=212
LIB=$base/lib-linux86-g212
;;
2.1.1 )
glibc=211
LIB=$base/lib-linux86-g211
;;
####################################################################################
2.4.4) ##这都是加上的 其实只要改GLIBC_VERSION
glibc=232 ##对应上面半括号中较新版本版本号即可
LIB=$base/lib-linux86-g232
LIBLF=$LIB-lf
INC=$base/include-g23
;;
#####################################################################################
* )
echo "ERROR: unknown glibc version ($GLIBC_VERSION)."
quit 1
;;
esac
# PGI software needs some of the gcc libraries. Run gcc to determine
# to determine which linker and libraries are actually being used.
type $gcc > /dev/null 2>&1
if test $? -eq 1 ; then
echo "ERROR: gcc not found;"
echo " successful use of compilers requires existence of gcc libraries"
quit 1
fi
cfile=$scratch/hello-$$.c
ffile=$scratch/hello-$$.f
cat > $cfile <<EOF_HELLO_C
#include <stdio.h>
#include <stdlib.h>
main(){ printf("Hello world!\n"); exit(0); }
EOF_HELLO_C
cat > $ffile <<EOF_HELLO_F
program hello
write(*,100)
100 format('Hello world!')
end
EOF_HELLO_F
out=$scratch/gccrun.$$
$gcc $gccopt $cfile > $out 2>&1
if test ! -s $out ; then
echo "ERROR: gcc failed to execute for reasons unknown."
quit 1
fi
########################################################################
####$gccbase=`$gcc -print-search-dirs | sed -e 's/^install: //' -e 1q`
####if test -d $gccbase$subdir ; then
#### GCCDIR="$gccbase$subdir" ##原有的
####fi
####gccversion=`$gcc -dumpversion`
#######################################################################
libgcc=`$gcc -print-libgcc-file-name`
gccbase=`dirname $libgcc`
GCCDIR="$gccbase$subdir" ＃＃自己加的
gccversion=`basename $gccbase`
##########################################################################
# Check and see whether directory that gcc claims to exist actually
# does exist.
if test ! -d $gccbase ; then
echo "ERROR: directory $gccbase: not found;"
echo " successful use of compilers requires existence of gcc libraries!"
quit 1
fi
if test -d ${gccbase}include ; then
GCCINC=${gccbase}include
else
unset GCCINC
fi
# Find the linker
get_linker_version # returns LINKER
if test ! -x $LINKER ; then
echo "ERROR: Linker $LINKER: not found"
quit 1
fi
# Which g77? PGI software needs the g77 libraries, so look for the g77 libs.
type $g77 >/dev/null 2>&1
if test $? -eq 1 ; then
echo "WARNING: g77 not found; this may cause problems during use"
G77DIR='""'
else
out=$scratch/g77run.$$
$g77 $g77opt $ffile > $out 2>&1
libgcc=`$g77 -print-libgcc-file-name`
g77base=`$g77 -print-search-dirs | sed -e 's/^install: //' -e 1q`
if test -d $g77base$subdir ; then
G77DIR="$g77base$subdir"
else
G77DIR='""'
fi
f2c=`cat $out | grep lf2c`
g2c=`cat $out | grep lg2c`
if test -n "$f2c" ; then
G77LIB="-lf2c"
fi
if test -n "$g2c" ; then
G77LIB="-lg2c"
fi
fi
if test -n "$G77LIB" ; then
print_line "set LFC=$G77LIB;"
fi
# Which dynamic linker?
if test "$LINKER" != "/lib/ld-linux.so.1" ; then
print_line "set LDSO=$LINKER;"
fi
# CDK uses its own libmpich.a.
if test -f "$base/bin/mpirun" ; then
print_line "set MPILIB=$base/lib;"
MPILIB=$base/lib/libmpich.a
fi
print_line "set GCCDIR=$GCCDIR;"
print_line "set GCCINC=$GCCINC;"
print_line "set G77DIR=$G77DIR;"
#Add setaff_bind.o and -lnuma at link line
x=$base
x=`echo $x | sed -e 's/.*86-64.*/86-64/'`
if test "$x" = "86-64" ; then
if test -e $usrlib/libnuma.so ; then
print_line 'set NUMAOBJS=$COMPLIBOBJ/setaff_bind.o;'
print_line "set NUMALIBS=-lnuma;"
fi
fi
if test $pgi50 -eq 0 ; then
print_line "set STDRPATH=-rpath \$PGI/linux86/lib;"
fi
print_line 'set LOCALRC=YES;'
if test "$noexec" -eq 1 ; then
pretty_print 'PGI directory' ^ $installdir
pretty_print 'PGI version' ^ $version
pretty_print 'PATH entry' ^ "$base/bin"
pretty_print 'System linker' ^ $LINKER
pretty_print 'GCC directory' ^ $GCCDIR
pretty_print 'GCC headers' ^ $GCCINC
pretty_print 'G77 directory' ^ $G77DIR
pretty_print 'G77 headers' ^ $G77LIB
if test -n "$GLIBC_VERSION" ; then
pretty_print 'GNU C version' ^ $GLIBC_VERSION
pretty_print 'PGI glibc libs' ^ $LIB
pretty_print 'PGI glibc headers' ^ $INC
else
pretty_print 'Glibc version' ^ 'no'
fi
if test -n "$LIBLF" ; then
pretty_print 'Large file support' ^ $LIBLF
else
pretty_print 'Large file support' ^ 'no'
fi
if test -n "$MPILIB" ; then
pretty_print 'MPILIB' ^ $MPILIB
fi
if test $use_pthreads -eq 1 ; then
pretty_print 'Threads' ^ "$usrlib/libpthread.{a,so}"
else
pretty_print 'Threads' ^ "$base/lib/libpgthread.{a,so}"
fi
if test $no_m32_support -eq 1 ; then
pretty_print 'gcc supports -m32' ^ 'no'
else
pretty_print 'gcc supports -m32' ^ 'yes'
fi
quit 0
fi
# Make the necessary changes to meet glibc dependencies.
if test -n "$glibc" ; then
copy_files $LIB $base/lib
case "$glibc" in
22* | 23* )
copy_files $INC $base/include
print_line "set THROW=__THROW=;"
;;
21* )
;;
esac
# Large file support.
if test -n "$LIBLF" ; then
copy_files $LIBLF $base/liblf
else
rm -rf $base/liblf
fi
# Newer distributions of Linux do not need PGI-compiled versions of
# threads libraries.
if test $use_pthreads -eq 1 ; then
# Only create a symlink if the target file exists and
# the link does not.
if test -e $usrlib/libpthread.a ; then
if test ! -h $base/lib/libpgthread.a ; then
ln -s $usrlib/libpthread.a $base/lib/libpgthread.a
fi
fi
if test -e $lib/libpthread.so.0 ; then
if test ! -h $base/lib/libpgthread.so ; then
ln -s $lib/libpthread.so.0 $base/lib/libpgthread.so
fi
fi
fi
# Adjust header files based on the gcc version.
need_stddef=1
case "$gccversion" in
3.3* )
copy_files $base/include-gcc33 $base/include
;;
3.4* )
copy_files $base/include-gcc34 $base/include
need_stddef=0
;;
4.* )
copy_files $base/include-gcc40 $base/include
need_stddef=1
;;
* )
;;
esac
if test $need_stddef -eq 0 ; then
rm -f $base/include/stddef.h
fi
# Changes for 32-bit installs.
if test $set_hammer_empty -eq 1 ; then
print_line "set HAMMER=;"
print_line "set X86_64=;"
fi
if test $install_64_bit -eq 0 ; then
if test -f /etc/redhat-release ; then
grep 'release 9' /etc/redhat-release > /dev/null 2>&1
if test $? -eq 0; then
print_line "set LBSTAT=-lpthread -lpthread_nonshared;"
fi
fi
fi
# Stock distributions may need extra help in finding crt files.
if test $check_crt_files -eq 1 ; then
if test ! -f /usr/lib64/32/crt1.o ; then
print_line "set DEFLIBDIR=/usr/lib;"
print_line "set DEFSTDOBJDIR=/usr/lib;"
print_line "set EXTRAASARGS=--32;"
fi
fi
# For production installations, recover some space by unneeded files.
if test "$version" != "dev" ; then
rm -rf $base/include-g*
echo $GLIBC_VERSION > $base/glibc_version
fi
# Fix the 32/64-bit .*rc files.
if test $use_64bit_rcfiles -eq 11 ; then
files=`ls -1 $base/bin/.pg*-64 2>/dev/null`
for i in $files ; do
x=`echo $i | sed -e 's/-64$//'`
mv -f $i $x
done
rm -f $base/bin/.pg*-32 > /dev/null 2>&1
elif test $use_64bit_rcfiles -eq 10; then
files=`ls -1 $base/bin/.pg*-32 2>/dev/null`
for i in $files ; do
x=`echo $i | sed -e 's/-32$//'`
mv -f $i $x
done
rm -f $base/bin/.pg*-64 > /dev/null 2>&1
fi
fi
# Add timestamp and username.
print_line '# makelocalrc executed by ' `whoami` `date`
# If $ofile is set, then display the file to stdout. Otherwise, write
# it to $localrc.
if test $ofile -eq 1 ; then
echo "##### localrc contents #####"
cat $newrc
echo "############################"
rm -f $newrc
else
if test -f $localrc ; then
mv -f $localrc $localrc.bak
chmod -f 0644 $localrc.bak
fi
mv -f $newrc $localrc
chmod -f 0644 $localrc
fi
# Copy omp_lib.mod from lib directory to include directory
echo
if test -f $base/lib/omp_lib.mod ; then
cp -f $base/lib/omp_lib.mod $base/include/omp_lib.mod
fi
if test -f $base/lib/omp_lib_kinds.mod ; then
cp -f $base/lib/omp_lib_kinds.mod $base/include/omp_lib_kinds.mod
fi
quit 0 |
|
IP卡
狗仔卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主