下面是我在 FreeBSD 下 PPPoE 的设置。
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $
#################################################################
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
#set device /dev/cuaa1
set device PPPoE:lnc0
set speed sync
#set speed 115200
#set dial "ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5
"" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT"
#set timeout 180 # 3 minute idle timer (the default)
enable dns # request DNS info (for resolv.conf)
adsl:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
#set phone PHONE_NUM
set authname USERNAME
set authkey PASSWORD
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR # Add a (sticky) default route